How to Oil Singer Sewing Machine: A Practical Guide
How to oil a Singer sewing machine: clean the lint, oil the points the manual shows, sew on scrap fabric and wipe away the excess.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
1-Gallon Clear Sewing Machine Oil9.6/10View on Amazon - 2
Sewing Machine Oil ~ Lily White (Quart)9.6/10View on Amazon
A quilt top waits on the table, the machine starts to run stiff, and the stitching turns uneven halfway down a seam. That drag is often lint and dry metal, and knowing how to oil singer sewing machine models puts the smooth stitch back. The short answer: switch the machine off, brush the lint out of the bobbin area, put a small amount of clear sewing machine oil on the points the manual shows, sew on scrap fabric, and wipe away the excess.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Below: the oiling steps in order, the oils in this guide, and what to check before you oil.

1-Gallon Clear Sewing Machine Oil
A clear, non-staining sewing machine oil in a 1-gallon bottle, listed as compatible with Singer, Juki, Consew and Brother machines.
Pros
- Clear, non-staining formula for light-colored fabrics
- Listed as compatible with Juki, Singer, Consew and Brother machines
- 1-gallon size for high-volume sewing
- Maker claims it reduces wear and extends machine life
Cons
- No warranty term is stated
- The 1-gallon size is more than a home sewer needs
- The listing positions it for industrial machines and shops
- No spout or applicator is stated

Sewing Machine Oil ~ Lily White (Quart)
A low-viscosity, water white sewing machine oil in a quart bottle, made in the U.S.A.
Pros
- Low viscosity, water white oil made for sewing machines
- 32 fluid OZ (0.94 liters) in a quart bottle
- Made in the U.S.A.
- Suited to uses where oil may touch fabric
Cons
- No warranty term is stated
- No brand compatibility list is stated
- No spout or applicator detail is stated
- The quart size suits home use, not high-volume shops
How to oil singer sewing machine: the steps
- Switch off and unplug. Switch the machine off and unplug it before any cleaning or oiling, so the needle cannot move while your fingers are near the bobbin area.
- Clean the lint first. Open the bobbin area and brush the lint out. A sewing machine cleaning brush or a mini vacuum for sewing machine cleaning clears the lint that oil would only trap in place.
- Oil the points the manual shows. Put a small amount of clear sewing machine oil on the oiling points the Singer manual names for the model. The manual is the authority here: points differ by model, so oil only the spots it shows.
- Work the oil in. Turn the handwheel by hand to move the oiled parts, then sew on scrap fabric so the oil spreads and any excess lands on the scrap, not on the project.
- Wipe the excess. Wipe away any oil that shows around the needle plate and bobbin area with a clean cloth, and check the fabric stays clean before the real seam.
Oil for the job
The oils below fit the steps above: a clear, low-viscosity oil for home machines and a gallon of clear oil for heavy use, each with its own size and use.
What to check before you oil
- Manual first. Check the Singer manual for the model before oiling: it names the points that take oil.
- Right oil. Use oil made for sewing machines: clear, low-viscosity and non-staining. The ATZ oil is water white and low viscosity; the IDS oil is crystal clear and non-staining.
- Oil or grease. Oil and grease are not the same job: see the sewing machine oil vs grease comparison before swapping one for the other.
- Size. Match the bottle to the workload: the ATZ quart suits a home machine, while the IDS gallon suits high-volume sewing.
- Spout. A long spout reaches tight oiling points: see the best sewing machine oil with extended spout picks.
FAQ: lasers and CNC
How often should I oil my Singer sewing machine?
Follow the manual for the model: it sets the interval. If the manual calls for oiling, oil when the machine turns noisy or the stitching turns rough after cleaning, and always clean the lint first.
Can I use any oil on a Singer sewing machine?
No: use oil made for sewing machines. Both oils here are clear, and the IDS oil is non-staining and names Singer among the brands it fits. Household oils and grease are not sewing machine oil.
Where do I put oil on a Singer sewing machine?
On the oiling points the manual shows for the model, usually around the bobbin area after the lint is out. Oil only the spots the manual names.
What happens if I use too much oil?
Excess oil can reach the fabric and mark it. Wipe away what shows, sew on scrap fabric first, and use a non-staining oil such as the clear oils below.
Is sewing machine oil the same as grease?
No. Oil flows into tight moving parts; grease stays put on heavier parts. The sewing machine oil vs grease comparison explains which job takes which.
Which oil should I buy for a home Singer?
The ATZ quart suits a home machine: low viscosity, water white, made in the U.S.A. The IDS gallon suits high-volume sewing and names Singer as compatible, but a gallon is more than a home sewer needs.
Related: the best sewing machine oil picks, the best sewing machine oil with extended spout picks, the how to thread Singer heavy duty sewing machine guide and the best sewing machine oil and lint brush kit picks.




