How to Make Lapel Pins at Home
Learn how to make lapel pins at home: design the pin face, fix a blank pin to its back, fit a clutch back, and check the fit before you wear or sell the pin.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
JANYUN 120 Pairs Butterfly Clutch Tie Tacks Pin9.7/10View on Amazon - 2
JIANYI Lock Pin Backs for Lapel Pins, 50 Pack9.6/10View on Amazon - 3
50 Pairs Metal Pin and Locking Pin Back for DIY9.5/10View on Amazon - 4
JANYUN 40 Pairs Rubber Blank Pin Backs Butterfly9.5/10View on Amazon
How to make lapel pins starts with a pin face, a blank pin post and a clutch back: design the face, fix the post to its back, slide on the clutch, and check that the finished pin sits flat and stays put. A pin face can be enamel, printed artwork or shaped clay.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Pin back sizes vary by maker, and one listing can give two sizes for the same back. Check the sizes in the product card before ordering.

JANYUN 120 Pairs Butterfly Clutch Tie Tacks Pin
120 pairs of nickel plated brass clutch backs and blank pins, with 11 mm clutch backs and 8 mm pins in gold and silver.
Pros
- 120 pairs cover large batches of pins and badges
- 11 mm clutch backs with 8 mm blank pins in gold and silver
- Nickel plated brass backs lock pins firmly
- Butterfly clutch with spring fastener installs with no tools
Cons
- 120 pairs is more than a maker of a few pins needs
- Gold and silver only, with no black finish
- Small 11 mm clutch backs are easy to misplace
- No pin face included; you supply the enamel face

JIANYI Lock Pin Backs for Lapel Pins, 50 Pack
50 nickel plated brass locking pin backs with a spring-loaded closure, packed in a transparent plastic box.
Pros
- Spring-loaded closure locks pins firmly in place
- 50 backs in a transparent box for storage
- Nickel plated brass, sturdy and long lasting
- Squeeze the wings to remove the back fast
Cons
- 50 backs is a small pack for batch makers
- Silver only, with no gold finish
- Backs only; no blank pins included
- 1 year warranty, shorter than the 2 year term on the JANYUN 120-pair set

50 Pairs Metal Pin and Locking Pin Back for DIY
50 pairs of nickel-plated copper blank pins and locking backs, with 8 mm pins and 11 mm backs for DIY lapel pins.
Pros
- 50 pairs include both the blank pin and the locking back
- 8 mm pins with 4 mm heads and 11 mm backs
- Nickel-plated copper, durable and secure
- Butterfly clutch with spring fastener installs with no tools
Cons
- No warranty term is stated
- Chrome color only, with no gold finish
- Backs stand 7 mm tall behind the fabric
- 50 pairs is a small pack for batch makers

JANYUN 40 Pairs Rubber Blank Pin Backs Butterfly
40 pairs of rubber butterfly clutch backs with nickel-plated brass blank pins, with 9 mm pins and 11 mm backs.
Pros
- Rubber clutch backs grip the pin without metal wings
- 9 mm pins, 10 mm across, with 11 mm backs
- Blank pins are nickel-plated brass, sturdy and light
- Installs and removes with no tools
Cons
- 40 pairs is the smallest pack in this guide
- Black rubber backs only, with no silver or gold finish
- 90-day warranty, shorter than the 1 year and 2 year terms
- No metal clutch option in this pack
How to make lapel pins
How to make lapel pins comes down to the face, the post, the clutch back and the fit check. The face is the part people see, the post goes through fabric, and the clutch back holds the post in place.
Step 1: Design the pin face
Start with the face. An enamel face, a printed face or a clay face all work with the same backs. Keep the design simple at first. The face needs a flat back so the post sits straight.
Step 2: Fix the blank pin to the back
Fix the blank pin to the back of the face with jewelry glue, and let it set fully before handling the pin. Set the post near the center of the face so the pin hangs straight. The JANYUN sets and the Weico kit include blank pins; the JIANYI set is backs only.
Step 3: Fit the clutch back and check the pin
Slide the clutch onto the post until it grips, then check the pin on fabric. The pin should sit flat and the clutch should hold when the fabric moves. The clutch backs in the JANYUN and Weico sets measure 11 mm across.
Pin backs and blank pins for this project
The clutch back and blank pin from step 3 hold the finished pin on a lapel, so the four sets below cover that step in different pack sizes and materials.
Common mistakes to avoid
- Ordering backs without checking the pin size.
- Using a clutch back that does not fit the blank pin.
- Handling the pin before the glue has set.
- Ordering one pack for a large batch.
- Skipping the fit check on fabric.
How to make lapel pins: the short version
- Design the pin face.
- Fix the blank pin to the back of the face.
- Slide on the clutch back.
- Check the fit on fabric.
Everything after that is repetition.
FAQ: lasers and CNC
What is needed to make lapel pins at home?
A pin face, a blank pin post, a clutch back and an adhesive made for metal and enamel.
What size pin back is needed?
Match the clutch back to the blank pin in the same set. The clutch backs in the JANYUN and Weico sets measure 11 mm across, with blank pins of 8 mm or 9 mm.
Can rubber pin backs be used for lapel pins?
Yes. The JANYUN rubber set has PVC rubber clutch backs with nickel-plated brass blank pins, and the rubber clutch installs with no tools.
How to keep a lapel pin from falling off?
Use a clutch back with a spring fastener that grips the post, and check the fit on fabric before wearing the pin. The JIANYI backs (on Amazon) have a spring-loaded closure, and the JANYUN 120-pair (on Amazon) set and the Weico kit have butterfly clutches with spring fasteners.
How many pin backs to order?
Match the pack to the batch. The JANYUN rubber set has 40 pairs, the JIANYI set has 50 backs and the Weico kit has 50 pairs, while the JANYUN 120-pair set has 120 pairs.
Related: the jewelry and lapidary hub, best jewelry glue and UV resin vs epoxy resin for jewelry. Also see how to clean jewelry. Also see best ring sizer.




