Hobby Knife Blade Types and Their Uses
Hobby knife blade types explained through the #11 fine point blade: its 25-degree point, the materials makers state it cuts, and how four blade packs differ.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
X-Acto Knife Blades, No. 11 Blade With Safety9.5/10View on Amazon - 2
Nicpro 120 PCS #11 Hobby Blades Refill Set9.5/10View on Amazon - 3
DIYSELF 150 PCS Exacto Knife Blades #119.5/10View on Amazon - 4
JETMORE 60 Pack Exacto Knife Blades 119.5/10View on Amazon
Hobby knife blade types come down to the shape of the point and the steel it is ground from, and every pack in this guide is the fine point type: a straight, pointed blade that makers state for controlled cuts in paper, cardboard and thin sheet material. Every blade pack in this guide is that fine point type, so the guide explains what it is, which materials the makers state it cuts, and how the packs differ on steel, count and storage.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

X-Acto Knife Blades, No. 11 Blade With Safety
A pack of 15 No. 11 carbon blades in a safety dispenser with a slot for used blades, for Type A handles, with a stated 2 year warranty.
Pros
- Safety dispenser with a slot for used blades
- Carbon and stainless steel ground to a surgical edge
- Stated 2 year warranty
- Works with Type A handles
Cons
- 15 blades is the smallest count here
- No blade angle figure is stated
- No lubricant coating is stated
- Pack weight and blade steel grade are limited in detail

Nicpro 120 PCS #11 Hobby Blades Refill Set
120 #11 hobby blades in SK-5 high carbon steel with a 25-degree point, double-honed edge, lubricant coating and a plastic storage case.
Pros
- 120 blades in a plastic storage case
- 25-degree point stated for detailed carving
- Double-honed edge on SK-5 high carbon steel
- Lubricant coating for storage
Cons
- No warranty term is stated
- Storage case is plastic, not a dispenser
- No used-blade slot is stated
- Blade count is below the 150 pack

DIYSELF 150 PCS Exacto Knife Blades #11
150 #11 exacto knife blades in SK5 high-carbon steel with a lubricant coating, stated to fit all craft knives, for paper, cardboard and leather.
Pros
- 150 blades is the largest count here
- SK5 high-carbon steel stated
- Lubricant coating against rust in storage
- Stated to fit all craft knives
Cons
- No warranty term is stated
- No storage case is stated
- No blade angle figure is stated
- No used-blade slot is stated

JETMORE 60 Pack Exacto Knife Blades 11
60 #11 hobby blades in SK5 alloy steel with a 25-degree straight point, protective oil coating and a transparent storage box.
Pros
- 25-degree straight-pointed blade stated
- SK5 alloy steel, extra-thick
- Transparent box for spare blades
- Protective oil coating for storage
Cons
- No warranty term is stated
- Oil residue must be wiped off before use
- 60 blades is a mid-size count
- No used-blade slot is stated
The #11 fine point blade: hobby knife blade types
Makers describe the #11 as a standard fine point blade for craft and hobby knives. Jetmore describes its version as a straight-pointed blade with a 25-degree blade angle, made for paper models and small parts. Nicpro states the same 25-degree slope for detailed carving and stencil work, with a fine point for tight corners and small parts. DIYSELF calls its blades standard #11 fine point blades that fit all craft knives, and X-Acto states its No. 11 blades work with a Type A handle. Fit is stated per maker, from all fine #11 craft knives to a Type A handle, so check the fit stated for each pack below before loading a blade for precise hand cutting.
What #11 blades cut
The makers state overlapping material ranges across these packs. Jetmore lists thin wood, scrapbooking, cardboard, paper, plastic, cloth, leather and foam board. Nicpro lists scrapbook paper, vinyl, plastics, leather and foam boards, plus paper cutting, stenciling, rubber stamp carving, leather tooling and flush-cutting plastic models. DIYSELF lists wood, cardboard, paper, plastic, cloth, leather and foam board. Across these packs, makers name stencil work, model parts, paper craft and trimming sheet material after a machine cut. For machine cutting itself, see our cutting machine blade guide, and for the hand tool comparison, our utility knife vs craft knife page.
Steel, coating and storage
Two of the four packs state SK-5 high carbon steel, and one states SK5 alloy steel. Jetmore states SK5 alloy steel, extra-thick, with blades coated in protective oil and wrapped in oil-treated paper for storage; the maker says to wipe each blade clean before use. Nicpro states SK-5 high carbon steel with a double-honed edge and a protective lubricant coating, in a plastic storage case. DIYSELF states SK-5 high carbon steel with a lubricant coating against rust. X-Acto states carbon and stainless steel blades ground to a surgical edge, supplied in a safety dispenser with a slot for used blades. Storage differs: a transparent box from Jetmore, a storage case from Nicpro and a safety dispenser from X-Acto.
Gear for this job: #11 blade packs
The cutting step above is where the gear earns its place: each pack below is the #11 blade supply you load into a craft knife handle for the paper, stencil and model work described in this guide.
Choosing a pack size
Pack counts run from 15 blades in the X-Acto dispenser pack to 60 from Jetmore, 120 from Nicpro and 150 from DIYSELF. The X-Acto pack is the only one with a stated warranty, at 2 years, and the only one with a safety dispenser and a slot for used blades. The larger packs state SK5 or SK-5 steel and lubricant or oil coatings for storage. Pick the count that matches how often you change blades, and see our craft machines hub for the tools these blades support.
FAQ: lasers and CNC
What is a #11 hobby knife blade?
It is the standard fine point blade for craft and hobby knives: a straight, pointed blade. Jetmore and Nicpro both state a 25-degree blade angle for their #11 blades, made for detailed cuts in paper models, stencils and small parts.
Do #11 blades fit any craft knife handle?
The makers state broad fit. Jetmore says its blades fit all fine #11 craft knives, DIYSELF says standard #11 fine point blades fit all craft knives, Nicpro says its blades fit most standard craft and hobby knife handles, and X-Acto states its No. 11 blades work with a Type A handle.
What materials can #11 blades cut?
The makers list paper, cardboard, plastic, cloth, leather, foam board and thin wood across these packs. Nicpro also lists vinyl, rubber stamp carving and flush-cutting plastic models. These are the hand-cutting materials the makers name for detail work.
Why are new blades coated in oil?
Jetmore states its blades are coated with protective oil and wrapped in oil-treated paper to help prevent rust during storage and shipping, and says to wipe each blade clean before use. Nicpro and DIYSELF state a lubricant coating for the same storage purpose.
How should used blades be stored?
X-Acto supplies a safety dispenser with a slot for used blades. Nicpro supplies a plastic storage case that keeps the blades organized. Jetmore supplies a transparent box for the spare blades. Only the X-Acto dispenser states a slot for used blades; the other packs state storage for spare blades.




