Genmitsu 3018 Pro vs 3018 Pro Max: Which One Should You Buy?
Compact desktop CNC routers compared on spindle, workspace, materials, control, safety and assembly, using what each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Genmitsu CNC 3018-PRO Router Kit GRBL Control9.5/10View on Amazon - 2
RATTMMOTOR 3 Axis GRBL CNC-3018-PRO MAX DIY Mini9.5/10View on Amazon
A benchtop CNC router turns a spare corner of a workshop into a place where signs, plaques, brackets and small milled parts take shape from a drawing. This comparison looks at genmitsu 3018 pro vs 3018 pro max and weighs what each listing states about spindle, workspace, materials, control and safety.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: Pick the Genmitsu 3018-PRO for Wi-Fi app control and a stated UL Approved power adapter. Pick the RATTMMOTOR 3018-PRO MAX for stated emergency stop and limit hardware and a stated aluminum alloy working table; confirm its working area with the seller, since the listing gives conflicting figures.
Machines on the list

Genmitsu CNC 3018-PRO Router Kit GRBL Control
A GRBL desktop CNC router kit with a Wi-Fi module for app G-code sending, a raised 4cm base and a UL Approved power adapter.
Pros
- Wi-Fi module included for app G-code sending from a mobile device
- UL Approved power adapter stated in the listing
- Supports a drop-in 20,000rpm spindle with no G-code change
- App setup in less than 5 minutes per the listing, with no component positioning needed
Cons
- Working area not stated in the listing
- Spindle power and included spindle details not stated
- No Wi-Fi 6 support, and dual-band networks need separate SSID names
- No warranty term stated in the listing

RATTMMOTOR 3 Axis GRBL CNC-3018-PRO MAX DIY Mini
A GRBL 1.1 DIY mini CNC router kit with a black injection molding frame, an aluminum alloy working table, a 775 spindle motor and emergency stop and limit functions.
Pros
- GRBL1.1 board with emergency stop and X/Y/Z limit functions
- Aluminum alloy working table with stainless steel screw rods
- 775 spindle motor included, rated 10000r/min at 24V
- Paper manual and USB drive with files included for assembly
Cons
- Harder materials such as glass, hard metal and jade cannot be engraved, per the listing
- No warranty term stated in the listing
Other machines to compare
SainSmart Genmitsu 4040-PRO MAX CNC Router with 710W TrimmerCheck price on Amazon
SainSmart Genmitsu 4040-PRO MAX CNC RouterCheck price on Amazon
Genmitsu 4040-PRO CNC Router Machine for Metal AcrylicCheck price on Amazon
LUNYEE 3018 PRO MAX CNC Machine 500W All-Metal CNC RouterCheck price on Amazon
Side by side
| Spec | Genmitsu 3018-PRO | RATTMMOTOR 3018-PRO MAX | Notes |
|---|---|---|---|
| HQ Score | 64 | 63 | Close race |
| Spindle | Drop-in 20,000rpm spindle support | 775 motor, 10000r/min at 24V; board supports 20000RPM | Both list 20,000rpm support |
| Workspace | Not stated in the listing | Title states 300x180x45mm; bullets state 18x10x4.5CM | RATTMMOTOR listing gives two different figures |
| Frame | Frame size not stated; base height raised to 4cm | 42x35x27CM (16.53 x 13.78 x 10.63 in) | Only the MAX side states a frame size |
| Control | GRBL on Arduino, with Wi-Fi app G-code sending | GRBL1.1 board, USB, offline controller, tool setting (probe) | Both run GRBL |
| Materials | Plastics, soft aluminum, woods, acrylics, PVC, PCB | Wood, plastic, acrylic, PVC, PCB, carbon fiber, density board, copper, aluminum | Similar range |
| Safety | UL Approved power adapter | Emergency stop, X/Y/Z limit functions, limit switch | MAX side lists more safety hardware |
| Setup | App setup in less than 5 minutes per the listing | Paper manual and USB drive with files included | Genmitsu states app setup time; RATTMMOTOR states included docs |
| Warranty | Not stated in the listing | Not stated in the listing | Neither listing states a warranty |
We give each product’s specs as its manufacturer rates them; listings read 5 November 2026.
Genmitsu 3018 Pro vs 3018 Pro Max: Spindle and Cutting
The Genmitsu listing states support for a drop-in 20,000rpm spindle, with no G-code change needed to reach full speed. The RATTMMOTOR listing states a 775 spindle motor rated 10000r/min at 24V, and a board that supports a spindle up to 20000RPM. Neither listing states spindle power in watts.
Workspace
The Genmitsu listing does not state a working area or machine dimensions. The RATTMMOTOR listing states a working area, but its figures disagree: the title states 300x180x45mm while the bullets state 18x10x4.5CM, and the inch figures in the bullets do not match the centimeter figures. Ask the seller for the working area before planning around a stated size.
Materials
Both listings cover the usual desktop CNC materials. Genmitsu lists plastics, soft aluminum, woods, acrylics, PVC and PCB. RATTMMOTOR lists wood, plastic, acrylic, PVC, PCB, carbon fiber, density board, copper and aluminum; harder materials such as glass, hard metal and jade cannot be engraved, per the listing. For wood choice, see basswood vs birch for CNC.
Control and Software
Both machines run GRBL. The Genmitsu uses GRBL on Arduino and adds a GGW-UART Wi-Fi module, so a mobile app can send G-code to the machine from a phone. The RATTMMOTOR runs a GRBL1.1 board with USB, an offline controller and tool setting with a probe. App setup takes less than 5 minutes per the Genmitsu listing; the RATTMMOTOR ships with a paper manual and a USB drive of files.
Safety
The Genmitsu listing states a UL Approved power adapter. The RATTMMOTOR listing states more safety hardware: a GRBL board that supports emergency stop and X/Y/Z axis limit functions, an emergency stop button, a limit switch, a power switch button and a silent fan. Neither listing mentions an enclosure. Wear eye and hearing protection, keep hands clear of the spindle, and stop the machine if the cut goes wrong.
Assembly and Setup
The Genmitsu kit needs no positioning of components, per the listing, which the maker says eases assembly and improves working precision. The app setup takes less than 5 minutes. The RATTMMOTOR kit is aimed at DIY carving enthusiasts and beginners, and ships with a paper manual and a USB drive of files. Neither listing states an assembly time.
Choose the Genmitsu 3018-PRO if
- You want to send G-code from a phone over Wi-Fi.
- A stated UL Approved power adapter matters to you.
- You want drop-in 20,000rpm spindle support with no G-code change.
Choose the RATTMMOTOR 3018-PRO MAX if
- You want stated emergency stop and limit hardware on the machine.
- You want a stated aluminum alloy working table.
- You want an offline controller and tool setting with a probe.
Desktop routers cut with a spinning bit and throw chips and dust. Wear eye and hearing protection, keep hands clear of the spindle, clamp the workpiece before starting a cut, and stay with the machine while it runs.
Project Match
- Wood signs and plaques: either listing states wood among its materials.
- Acrylic parts and enclosures: either listing states acrylic among its materials.
- Milled circuit boards: either listing states PCB among its materials.
- Soft aluminum brackets: either listing states aluminum among its materials.
- Carbon fiber and density board: stated only in the RATTMMOTOR listing.
FAQ: lasers and CNC
Which is better for a beginner, the Genmitsu 3018-PRO or the 3018-PRO MAX?
The RATTMMOTOR listing says the kit is designed for DIY carving enthusiasts and beginners, while the Genmitsu listing says no component positioning is needed and app setup takes less than 5 minutes. Pick by control style: Wi-Fi app sending, or an offline controller with a probe.
What materials can the 3018-PRO and 3018-PRO MAX cut?
Genmitsu lists plastics, soft aluminum, woods, acrylics, PVC and PCB. RATTMMOTOR lists wood, plastic, acrylic, PVC, PCB, carbon fiber, density board, copper and aluminum. RATTMMOTOR adds that harder materials such as glass, hard metal and jade cannot be engraved.
Does the Genmitsu 3018-PRO work over Wi-Fi?
Yes, with the included GGW-UART Wi-Fi module and app G-code sending. The module works up to Wi-Fi 5 (802.11ac) and does not support Wi-Fi 6, and a dual-band network needs different SSID names for 2.4Ghz and 5Ghz.
What is the working area of the RATTMMOTOR 3018-PRO MAX?
The listing gives conflicting figures: the title states 300x180x45mm while the bullets state 18x10x4.5CM. Ask the seller for the working area before planning a project around a stated size.
Do these machines have an emergency stop?
The RATTMMOTOR listing states a GRBL board that supports emergency stop and X/Y/Z limit functions, with an emergency stop button and a limit switch on the machine. The Genmitsu listing does not state an emergency stop.
Related: how to choose a desktop CNC router, 3018 CNC vs diode laser engraver, best CNC bits for 3018 CNC and 3018 vs 4040 CNC router.




