CNC Machine Sizes: Work Area Chart
CNC machine sizes run from compact desktop mills to large benchtop routers, and the work area decides which projects fit.

On this page
A sign blank that will not fit on the bed, a cutting board that needs a pass the machine cannot make, a project that ends up cut in sections and glued back together: most size trouble starts before the spindle turns. CNC machine sizes describe the cutting envelope a router can reach, and the sections below turn maker figures for desktop machines into a plain comparison of work area, footprint and height, so the machine fits the work and the bench it sits on.
As an Amazon Associate I earn from qualifying purchases. LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Work area figures in this guide come from maker listings for the machines named in the text.
CNC machine sizes: reading the work area chart
A work area gives the reach of the spindle in X, Y and Z. The X and Y figures set how far the spindle can reach across a flat sheet, while the Z figure, with the pass height, sets how thick the stock can be and how deep the bit can reach. Read the work area as a cutting envelope: a board longer than the X or Y figure needs another setup, and stock taller than the Z figure will not fit under the gantry.
Makers state work areas in mixed units. The types of CNC machines differ in size as much as in shape, so read the chart in the units the maker gives.
Desktop work areas in the chart
| Machine | Work area | Footprint |
|---|---|---|
| CNCTOPBAOS 1610 PRO | 7.08 x 3.93 x 1.77 inches | 11.81 x 10.23 x 9.84 inches |
| Genmitsu 3018-PROVer V2 | 11.2 x 7.1 x 1.6 inches | Not stated |
| Carvera Air | 11.8 x 7.9 x 5.1 inches | 19.7 x 17.7 x 17.7 inches |
| Genmitsu 3020-PRO MAX V2 | 11.8 x 8.1 x 3.1 inches | Not stated |
| LUNYEE 4040 Nova | 400 x 400 mm | 26.77 x 26.77 x 20.4 inches |
| Genmitsu 4040-PRO MAX | 16.1 x 15.9 x 3.0 inches | Not stated |
| Twotrees TTC450 Ultra | 465 x 465 mm | Not stated |
| FoxAlien Masuter Pro MAX | 600 x 600 mm | 37.0 x 37.0 x 17.0 inches |
| FoxAlien XE-Ultra 8080 | 33 x 33 x 4.72 inches | Not stated |
A sign blank that fits the Masuter Pro MAX at 600 x 600 mm will not fit the 1610 PRO at 7.08 x 3.93 inches.
Footprint: the space the machine itself needs
The work area is not the footprint. The Carvera Air work area is 11.8 x 7.9 x 5.1 inches inside a fully enclosed footprint of 19.7 x 17.7 x 17.7 inches, so the bench needs room around the cutting envelope for the enclosure and the gantry.
The FoxAlien Masuter Pro MAX measures 37.0 x 37.0 x 17.0 inches. Measure the bench before ordering, and leave clearance at the sides for loading stock and at the back for cables and dust extraction.
Z height and pass height
Z height and pass height set how thick the stock can be. The Carvera Air gives 5.1 inches of Z travel, the Genmitsu 3020-PRO MAX V2 gives 3.1 inches, and the Genmitsu 4040-PRO MAX (on Amazon) gives 3.0 inches. The FoxAlien XE-Ultra 8080 (on Amazon) gives 4.72 inches of Z travel and a 5.3 inch pass height, and the FoxAlien Masuter Pro MAX gives a 100 mm Z-axis pass height, or 3.94 inches. The CNCTOPBAOS 1610 PRO (on Amazon) gives 1.77 inches of Z travel, and the Genmitsu 3018-PROVer V2 (on Amazon) gives 1.6 inches.
Pass height and Z travel are not the same figure, so compare them separately.
Spindle power and speed
Spindle power and speed affect how fast the machine removes material, not how large a project it can cut. The CNCTOPBAOS 1610 PRO runs a 120 W spindle at 10000 rpm, with support for a spindle up to 20000 rpm. The Twotrees TTC450 Ultra (on Amazon) runs a 500 W spindle at 8000 to 30000 RPM, with an upgrade path to 3000 W. The FoxAlien Masuter Pro MAX runs a 500 W brushless spindle, the Genmitsu 4040-PRO MAX runs a 710 W spindle, and the LUNYEE 4040 Nova runs an 800 W router at up to 30000 RPM.
The Carvera Air 4th axis version runs closed-loop spindle control at 0 to 13,000 RPM, and the FoxAlien XE-Ultra 8080 runs at up to 5,000 mm/min with 2.6 N.m closed-loop stepper motors.
Rotary work and the 4th axis
A rotary axis turns round stock under the spindle, and the rotary work area is a diameter and a length, not a flat X and Y. The Carvera Air 4th axis kit gives a rotary work area of 3.6 inch diameter x 7.9 inch length, or 9.2 cm x 20 cm. The Twotrees TTC450 Ultra supports 4th-axis expansion, the FoxAlien Masuter Pro MAX has a dedicated 4th-axis port, and the Genmitsu 4040-PRO MAX lists a 4th-axis rotary module kit among its accessories.
A rotary axis suits tumblers, bats and round objects on the Masuter Pro MAX, and cylindrical machining, double-sided objects and 3D shapes on the Carvera Air.
How to match the size to the project
Start from the largest piece the shop cuts in a pass, then add the clamp and the margin the bit needs around the cut. Signs, plaques and cutting boards fit the desktop work areas in the chart, while larger furniture parts and panels fit the 600 x 600 mm area of the Masuter Pro MAX or the 33 x 33 inch area of the XE-Ultra 8080.
The LUNYEE 4040 Nova weighs 87.5 pounds, and the Twotrees TTC450 Ultra weighs 19 kg, so the bench needs to carry the machine plus the stock. The Genmitsu 3018-PROVer V2 assembles in about 35 minutes, and the LUNYEE 4040 Nova arrives 90 percent pre-assembled with setup in about 15 minutes.
Read how to choose a desktop CNC router before ordering.
Common mistakes to avoid
- Buying the largest work area before measuring the bench and the door it must pass through.
- Reading the work area as the footprint and finding the enclosure will not fit the bench.
- Forgetting Z height and ordering thick stock the machine cannot clear.
- Choosing a small bed for a sign that needs a pass wider than the work area.
- Skipping the clamp and margin around the cut.
CNC machine sizes: the short version
- Read the work area as X, Y and Z, in the units the maker gives.
- Compare the work area with the largest piece cut in a pass.
- Check the footprint against the bench.
- Check Z travel and pass height against the thickest stock.
- Match the spindle and the rotary axis to the material and the shape.
FAQ: lasers and CNC
What work area size do most desktop CNC routers have?
Desktop work areas in the chart run from 7.08 x 3.93 x 1.77 inches on the CNCTOPBAOS 1610 PRO to 11.8 x 7.9 x 5.1 inches on the Carvera Air and 16.1 x 15.9 x 3.0 inches on the Genmitsu 4040-PRO MAX. Larger benchtop routers give 465 x 465 mm on the Twotrees TTC450 Ultra and 600 x 600 mm on the FoxAlien Masuter Pro MAX.
How should a CNC machine be measured before ordering?
Measure the bench for the footprint, not the work area: the Carvera Air needs 19.7 x 17.7 x 17.7 inches, and the FoxAlien Masuter Pro MAX needs 37.0 x 37.0 x 17.0 inches. Leave clearance at the sides for loading stock.
What is the difference between work area and footprint?
The work area is the cutting envelope the spindle can reach, and the footprint is the space the machine itself takes on the bench. The CNCTOPBAOS 1610 PRO cuts 7.08 x 3.93 x 1.77 inches inside a frame of 11.81 x 10.23 x 9.84 inches.
What Z height suits thick stock?
Match the Z travel and pass height to the thickest stock plus the bit and the clamp. The Genmitsu 3018-PROVer V2 gives 1.6 inches, the Genmitsu 3020-PRO MAX V2 gives 3.1 inches, and the FoxAlien XE-Ultra 8080 gives 4.72 inches with a 5.3 inch pass height.
Does a bigger CNC work area cut faster?
No. The work area sets the size of the piece, while spindle power and speed affect how fast material comes off. The LUNYEE 4040 Nova runs an 800 W router at up to 30,000 RPM, and the Twotrees TTC450 Ultra runs a 500 W spindle at 8000 to 30000 RPM.
Related: the CNC routers hub, how to choose a desktop CNC router and best CNC router for small business. Also see CNC router types and best desktop CNC for beginners.




