Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Carbide Insert Price Guide: What Drives the Cost

What sets the price of a carbide insert, from coating and size to pack count and holders, with four insert sets for metal and wood turning.

Carbide Insert Price Guide: What Drives the Cost
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 121Pcs Indexable Lathe Turning Tool Kit,3/8" 10mm21Pcs Indexable Lathe Turning Tool Kit,3/8" 10mm9.7/10View on Amazon
  2. 2Indexable Lathe Turning Tool 21Pcs Kit 1/2'' 12mmIndexable Lathe Turning Tool 21Pcs Kit 1/2'' 12mm9.6/10View on Amazon
  3. 3Zouzmin CCMT21.51 CCMT060204 DCMT21.51 DCMT070204Zouzmin CCMT21.51 CCMT060204 DCMT21.51 DCMT0702049.6/10View on Amazon
  4. 412mm Round Carbide Inserts for Woodturning12mm Round Carbide Inserts for Woodturning9.5/10View on Amazon

When a batch of turned parts is on the order list, the cost of the inserts that cut them decides how much of the job stays in the shop. Carbide insert price comes down to the insert itself: its size and shape, its coating, how many come in the box, and whether holders come with it. This guide walks through each cost driver, then shows four insert sets for metal and wood turning.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Honest note

Listings do not publish a single standard price for inserts, so this guide gives no price figures. Compare the cost drivers below against the box you are buying, and check the listing you buy.

21Pcs Indexable Lathe Turning Tool Kit,3/8" 10mm

21Pcs Indexable Lathe Turning Tool Kit,3/8" 10mm

YoShin9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 21-piece kit with 7 holders on 10mm shanks and 14 CVD-coated inserts for turning, grooving, threading and boring on bench lathes.

Pros

  • 7 holders and 14 inserts, two per holder
  • CVD titanium-nitride coating on the inserts
  • 60-degree threading inside and outside in one box
  • A wrench ships with every holder

Cons

  • No warranty term is stated
  • 10mm shank is not a drop-in for a 3/8-inch English opening
  • Boring bars need a workpiece bore large enough for bar plus insert
  • Sized for 7x10 to 8x14 bench lathes
Indexable Lathe Turning Tool 21Pcs Kit 1/2'' 12mm

Indexable Lathe Turning Tool 21Pcs Kit 1/2'' 12mm

Joogto9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 21-piece kit with 7 holders on 12mm shanks and 14 CVD-coated carbide inserts for turning, grooving, threading and boring.

Pros

  • 7 holders and 14 inserts in one box
  • CVD-coated carbide inserts for stainless steel and tough alloys
  • Covers turning, grooving, threading and boring
  • 3-month refund policy and 360-day support

Cons

  • No warranty term is stated
  • 12mm shank needs a matching 12mm tool post
  • Includes holders, so buyers who only need inserts get parts they may not need
  • Seven holders cover four jobs, so a buyer needing one job carries the rest
Zouzmin CCMT21.51 CCMT060204 DCMT21.51 DCMT070204

Zouzmin CCMT21.51 CCMT060204 DCMT21.51 DCMT070204

zouzmin9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A box of 20 multilayer-coated carbide inserts in CCMT and DCMT shapes for turning and finishing steel, stainless steel, cast iron and non-ferrous metals.

Pros

  • 20 inserts in one box
  • Multilayer-coated solid carbide
  • CCMT and DCMT shapes for turning and finishing
  • Fits stainless steel, steel, cast iron and non-ferrous materials

Cons

  • No holders or boring bars included
  • Single-sided, so each insert offers one cutting side
  • Match the CCMT and DCMT shapes to your holder before ordering
  • Stated for turning and finishing, not for grooving or threading
12mm Round Carbide Inserts for Woodturning

12mm Round Carbide Inserts for Woodturning

NNBWKIXI9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A set of 10 round 12mm tungsten carbide inserts with a 30-degree cutting angle for woodturning, finishing and hollowing, with screws.

Pros

  • Round 12mm inserts for woodturning
  • 30-degree cutting angle for curved and concave surfaces
  • Reversible and indexable for fresh edges without sharpening
  • Screws included for mounting

Cons

  • Woodturning only, not for metal lathes
  • No holders included
  • 10 pieces, the smallest box here
  • Made for finisher and hollower tools

What sets the carbide insert price

Size and shape come first, because a round insert, a CCMT insert and a DCMT insert each fit a different holder and job. The NNBWKIXI set uses round 12mm inserts for woodturning, while the zouzmin box holds CCMT and DCMT inserts for metal turning and finishing. Match the shape code to the holder before ordering.

Coating is the next driver. The Joogto inserts carry a CVD coating, the YoShin inserts (on Amazon) carry a CVD titanium-nitride coating, and the zouzmin inserts (on Amazon) carry a multilayer coating. Each maker describes its coating in wear terms: Joogto lists a durable CVD coating, YoShin lists a wear-resistant layer over the carbide body, and zouzmin lists good wear resistance.

Pack count and holders decide what the box covers. A 20-piece box of inserts alone, like the zouzmin box, holds 20 inserts, while a 10-piece box like the NNBWKIXI set holds 10. A kit with holders, like the Joogto and YoShin 21-piece kits, includes 7 holders and 14 inserts, so the box covers the holder as well as the cutting edges. YoShin lists two inserts per holder, so a worn edge becomes a quick index or swap instead of a reorder.

How to compare two boxes

Start with the shank. The YoShin kit uses a 10mm shank for 10mm tool posts, and the Joogto kit uses a 12mm shank. A 10mm shank is not a drop-in for a 3/8-inch English opening, so verify the post size before ordering. Then check shape and count: the zouzmin box holds 20 inserts in CCMT and DCMT shapes, and the NNBWKIXI set holds 10 round inserts with screws. Finally, read the support terms: Joogto lists 24-hour service with a 3-month refund policy and 360-day support, while the other three state no support term.

Inserts and kits for metal and wood turning

The four sets below cover the cost drivers above: two kits with holders, one 20-piece refill box, and one round-insert set for woodturning.

FAQ: lasers and CNC

What makes one carbide insert cost more than another?

Size, shape, coating and pack count. A 20-piece box holds more inserts than a 10-piece box, and a kit with holders covers the holder as well as the inserts.

Do I need holders, or inserts alone?

Holders are needed if the lathe has none fitted for the insert shape. The Joogto and YoShin kits include 7 holders each, while the zouzmin box and the NNBWKIXI set hold inserts only, so match the insert shape to the holder before ordering.

What is the difference between CCMT and DCMT inserts?

They are two insert shapes in the zouzmin box, both listed for turning and finishing on steel, stainless steel, cast iron and non-ferrous materials. Check the shape code against the holder before ordering.

Can carbide inserts cut wood?

Yes, with inserts made for woodturning. The NNBWKIXI set holds round 12mm tungsten carbide inserts with a 30-degree cutting angle for woodturning, finishing and hollowing. The other three sets are listed for metal turning.

How many inserts come in a box?

The zouzmin box holds 20 inserts, the Joogto and YoShin kits hold 14 inserts with 7 holders each, and the NNBWKIXI set holds 10 inserts. YoShin lists two inserts per holder.

Related: the CNC tooling hub, best carbide insert surfacing bit for CNC and carbide insert vs solid carbide end mill. Also see our best end mill for stainless steel. Also see our carbide vs HSS end mill.

More buying guides