Best Soldering Gun (2026): 5 Picks Compared
5 soldering guns from 60W to 300W, compared by power, temperature range, auto-feed and warranty for electronics repair and DIY work.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallWeller 9400PKS9.7/10View on Amazon - 2
Best KitLarlarsa 120W Gun9.7/10View on Amazon - 3
Best IndustrialWeller D650PK9.5/10View on Amazon - 4
Best Auto-FeedEOOKU 60W Gun9.5/10View on Amazon - 5
Best Simple FeederDEXIMRO 60W Gun9.3/10View on Amazon
Best soldering gun for a maker bench is the one that heats fast, holds its temperature and feeds solder where the joint needs it. A gun beats a pencil iron when the joint is large or the wire is thick, since the pistol grip and trigger put power on demand. This roundup compares the guns on the specs their listings state, from dual-power Weller guns to auto-feed kits.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Weller 9400PKS: 140W/100W dual power, 6-second heat and a 7-year warranty Check price on Amazon
- Best Kit Larlarsa 120W Gun: 120W, 180-600°C range, auto-feed and a full toolkit Check price on Amazon
- Best Industrial Weller D650PK: 300W industrial gun with a limited lifetime warranty Check price on Amazon
- Best Auto-Feed EOOKU 60W Gun: 60W auto-feed gun with LCD display and a safety stand Check price on Amazon
- Best Simple Feeder DEXIMRO 60W Gun: 60W feeder gun for circuit boards and hobby repairs Check price on Amazon
Machines on the list

Weller Geuinine Universal Soldering Gun Kit
A dual-power pistol-grip gun with 140W/100W settings, a 6-second heat up and 3 LEDs that light the work.
Pros
- Two power settings, 140W and 100W, with 2 trigger positions
- Heats up in 6 seconds and reaches up to 900°F
- 3 built-in LEDs spotlight the work and cut tip shadow
- 7-year warranty is stated
Cons
- No temperature display is stated
- No solder wire, tips or stand are named in the listing
- 11.02 by 12.2 inch size is the largest stated here
- Trigger gives high to medium power, with no low setting named

Soldering Gun Kit - Soldering Iron Kit
A 120W auto-feed gun with a 180 to 600°C range, a digital display and a full toolkit in the box.
Pros
- Widest temperature range here, 180 to 600°C
- Auto-feed mechanism delivers solder wire to the tip for one-handed work
- Digital display gives real-time temperature monitoring
- Kit includes a tip cleaner, desoldering pump, anti-static tweezers and solder wire
Cons
- No warranty term is stated
- Only the pre-installed tip is included
- No stand is named in the listing
- 120W is less than the 300W Weller D650PK

Weller Genuine 300-Watts Industrial Soldering Gun
A 300W industrial gun kit built for demanding jobs, with a limited lifetime warranty.
Pros
- 300W is the highest power stated here
- Limited lifetime warranty is stated
- Built for demanding jobs, per the listing
- Weighs 2.2 pounds with a 12.0 by 2.75 by 9.5 inch size
Cons
- No temperature range is stated
- No heat-up time is stated
- No LEDs, display or stand are named in the listing
- No trigger positions or power settings are stated

EOOKU Soldering Iron Gun
A 60W auto-feed gun with an LCD temperature display, a 180 to 500°C range and a detachable safety stand.
Pros
- Auto-feed system delivers wire to the tip for one-handed soldering
- LCD display shows the temperature in real time
- Reaches temperature in 15 seconds
- Detachable safety stand is included for upright resting
Cons
- No warranty term is stated
- Not intended for ultra-fine micro-soldering, per the listing
- 60W is less than the 120W Larlarsa and the 300W Weller D650PK
- Designed for 0.8 to 1.0 mm solder wire only

New 110V 60W Soldering Gun with Solder Wire Feeder
A 60W gun with a built-in solder wire feeder and a feeding button for circuit board and hobby repairs.
Pros
- Integrated feeding design delivers solder wire smoothly
- Feeding button manages wire output for detailed repairs
- Compact gun-style build with a comfortable grip
- Suits circuit boards, components, wiring repairs and hobby projects
Cons
- No warranty term is stated
- No temperature range is stated
- No heat-up time is stated
- No display is stated
Other machines to compare
ATTEN ST-862D Lead-free Hot Air Gun Soldering StationCheck price on Amazon
Weller Industrial Soldering GunCheck price on Amazon
Specs compared
| Soldering Gun | HQ Score | Power | Temperature | Display | Warranty |
|---|---|---|---|---|---|
| Weller 9400PKS | 9.7/10 | 140W/100W | Up to 900°F | 3 LEDs | 7-year |
| Larlarsa 120W Gun | 9.7/10 | 120W | 180-600°C | LED digital | Not stated |
| Weller D650PK | 9.5/10 | 300W | Not stated | Not stated | Limited lifetime |
| EOOKU 60W Gun | 9.5/10 | 60W | 180-500°C | LCD display | Not stated |
| DEXIMRO 60W Gun | 9.3/10 | 60W | Not stated | Not stated | Not stated |
Specs are what each manufacturer publishes as its rating on the listing, collected 13 November 2026.
What the listings tell you, and what they leave out
We read 5 soldering gun listings for this guide. Only 2 stated a warranty term, and only 3 stated a temperature range. 3 of the 5 give a heat-up time, and 2 of those give a number in seconds. The thinnest listing is the Weller D650PK: 300W and a limited lifetime warranty, with no temperature range, no heat-up time and no display.
Treat a missing spec as a question for the seller, not as a zero. A gun that states no temperature range may still hold one well; the listing just does not say.
Buying guide: the best soldering gun
Gun vs iron
A soldering gun heats on trigger demand and rests cold between joints, while a pencil iron stays hot the whole session. The gun shape suits short, heavy joints and quick repairs, and the trigger gives power only while you hold it. If you solder for long stretches, compare with our best soldering iron guide, and the soldering iron vs soldering station comparison lines up irons against bench stations.
Watts and temperature
Watts set how fast the tip recovers heat on a large joint. The guns here run from 60W to 300W, and the Weller 9400PKS adds another setting at 100W for smaller work. Temperature range matters more for electronics: the EOOKU covers 180 to 500°C and the Larlarsa covers 180 to 600°C, while the Weller guns state a top temperature or none at all.
Auto-feed or manual
Auto-feed delivers solder wire to the tip, so one hand holds the gun and the other holds the work steady. The EOOKU and Larlarsa guns state auto-feed, and the EOOKU takes 0.8 to 1.0 mm wire with 1.0 mm recommended. The Weller guns and the DEXIMRO feed by hand or by a button, so the other hand manages the wire.
What the kit includes
A bare gun needs a stand, tips and wire from elsewhere. The Larlarsa kit includes a tip cleaner, a desoldering pump, anti-static tweezers and solder wire, and the EOOKU includes a detachable safety stand. The Weller listings name no stand, tips or wire, so plan to buy those separately.
Warranty
Only 2 of the 5 listings state a warranty term: the Weller 9400PKS states 7 years and the Weller D650PK states a limited lifetime warranty. The other 3 state none, which is common for auto-feed kits from newer brands. A stated warranty is worth weighing next to power and temperature range.
A soldering gun tip runs hot enough to burn skin on contact. Rest the gun in a stand between joints, keep flammable material away from the tip, work with ventilation, and never leave a hot gun unattended.
Project Match
| Project | Picks |
|---|---|
| PCB repair | EOOKU 60W Gun, DEXIMRO 60W Gun |
| Appliance repair and automotive wiring | EOOKU 60W Gun |
| Jewelry soldering | Larlarsa 120W Gun |
| Industrial and demanding jobs | Weller D650PK |
| Hobby and DIY projects | Larlarsa 120W Gun, DEXIMRO 60W Gun |
| No project type stated | Weller 9400PKS |
How the scores add up
Each gun is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Weller 9400PKS | 9.7 | 32 | 21 | 21 | 5 | 3 |
| Larlarsa 120W Gun | 9.7 | 33 | 22 | 22 | 4 | 0 |
| Weller D650PK | 9.5 | 28 | 21 | 19 | 0 | 4 |
| EOOKU 60W Gun | 9.5 | 29 | 20 | 20 | 4 | 0 |
| DEXIMRO 60W Gun | 9.3 | 26 | 19 | 19 | 0 | 0 |
HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher.
FAQ: lasers and CNC
How do I use a soldering gun?
Hold the trigger to heat the tip, touch the tip to the joint so the parts heat together, then feed solder into the joint, not onto the tip. Release the trigger and hold the joint still while the solder cools and sets.
How do I clean a soldering gun tip?
Wipe the hot tip on a tip cleaner to remove old solder and buildup, then coat it with fresh solder before it cools. The Larlarsa kit includes a solder tip cleaner for this job.
What is soldering wire made of?
The EOOKU listing suggests 60/40 or 63/37 rosin core solder, which is a tin and lead alloy with a rosin core that cleans the joint as it melts.
Is soldering easy?
Basic joints come quickly with practice, and a gun with auto-feed helps by freeing one hand. Start on scrap wire and spare boards before working on parts that matter.
Related: the best soldering station guide and the manual heat press machine guide. Also see our best engraving pen for metal, wood, glass and plastic.




