Best Pottery Bat System (2026): 5 Picks for Throwing
Five bat systems from 12 to 14 inches, compared by insert count, material, pin spacing and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallPenguin Pottery Bats9.6/10View on Amazon - 2
Best for DryingBleecker Bat System9.6/10View on Amazon - 3
Best Two-SidedSpaceSaver Bat System9.5/10View on Amazon - 4
Best StabilityVFIUME Bat System9.5/10View on Amazon - 5
Best Complete KitPasler Bat System9.5/10View on Amazon
Throwing on the wheel ends with the same awkward moment every time: a wet pot sits on the wheel head, and lifting it off risks warping the walls or leaving fingerprints in the clay. A bat system solves that moment by giving each pot its own removable plate, so the pot dries on the bat while the wheel keeps turning. This guide compares the best pottery bat system options for potters and clay artists, from Masonite insert sets to aluminum plate systems, by bat size, insert count, material, pin spacing and warranty.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Penguin Pottery Bats: A 14 inch system with 5 square Medex MDF inserts, a lifetime warranty, and inserts that take 30% to 40% less shelf area than round bats. Check price on Amazon
- Best for Drying Bleecker Bat System: Six 7 inch Masonite inserts that absorb water so pots release as they dry, with bat pins in the box. Check price on Amazon
- Best Two-Sided SpaceSaver Bat System: Eight 1/2 inch MDF bats with through-hole grommets, so each bat works on both sides. Check price on Amazon
- Best Stability VFIUME Bat System: Six 1.5 mm aluminum alloy plates with anti-vibration pads and 2 sets of fixing screws, with a 2 year manufacturer warranty. Check price on Amazon
- Best Complete Kit Pasler Bat System: A 12 inch base bat with five 7 inch inset bats and 2 stainless steel bat pins, with a 1 year warranty. Check price on Amazon
Machines on the list

Penguin Pottery Bats 14 Inch Pottery Bat System
A 14 inch bat system with 5 square Medex MDF inserts, a lifetime warranty, and a stackable base bat for small pieces.
Pros
- 14 inch base bat with 5 square 1/4 inch Medex MDF inserts
- Square inserts take 30% to 40% less area than round bats
- Stackable and lightweight for storage and transport
- Lifetime warranty with handmade build in Vermont
Cons
- No pin spacing is stated, so check wheel fit before ordering
- Five inserts, fewer than the 6 and 8 bat systems here
- Built for mugs, pots and small pieces rather than large work
- The 1/4 inch inserts are thinner than the 1/2 inch MDF bats here

Bat System for Potter’s Wheel
A 12 inch outer bat with six 7 inch square Masonite inserts, bat pins in the box, and a wide insert tab that keeps fingers clear.
Pros
- Six 7 inch square Masonite inserts for drying pots
- Masonite absorbs water so pots release as they dry
- Wide insert tab keeps fingers clear of the wheel head
- Bat pins included, and the outer bat fits pin holes 10 inches on center
Cons
- No warranty term is stated
- Six inserts, fewer than the 8 bat SpaceSaver system
- The 12 inch outer bat is smaller than the 14 inch Penguin system
- No stated thickness for the inserts or the outer bat

VFIUME 12" PVC Plastic Pottery Wheel Bat System
A 12 inch PVC bat with six 1.5 mm aluminum alloy plates, anti-vibration pads and 2 sets of fixing screws, with a 2 year manufacturer warranty.
Pros
- Six replaceable 1.5 mm aluminum alloy plates
- Anti-vibration pads and 2 sets of fixing screws steady the bat
- Pre-drilled holes fit most standard pottery wheels
- 2 year manufacturer warranty
Cons
- Plates are 1.5 mm thick, thinner than the MDF bats here
- No pin spacing figure is stated
- Six plates, fewer than the 8 bat SpaceSaver system
- The 12 inch bat is smaller than the 14 inch Penguin system

Pasler Pottery Bat System
A 12 inch base bat with five 7 inch inset bats and 2 stainless steel bat pins, in water-resistant composite plastic with a 1 year warranty.
Pros
- 12 inch base bat with five 7 inch inset bats
- Two stainless steel bat pins in the box
- Composite plastic resists deformation, cracking and delamination
- Inset bats rotate for continuous throwing with no downtime
Cons
- Five inset bats, fewer than the 6 and 8 bat systems here
- No pin spacing figure is stated
- The 1 year warranty is shorter than the 2 year and lifetime terms here
- The 12 inch base bat is smaller than the 14 inch Penguin system

StudioPro SpaceSaver Bat System with 8 Bats
Eight 1/2 inch exterior-grade MDF bats with finger lifts and through-hole grommets, spaced 10 inches on center for standard wheel pins.
Pros
- Eight bats, the most in this guide
- Through-hole grommets make each bat two-sided
- Rubber grommets spaced 10 inches on center for standard wheel pins
- Finger lifts and rounded edges for easier removal
Cons
- No warranty term is stated
- Eight separate bats with no base bat or insert system
- Bat pins are not part of the stated contents
- The bats are smaller than the 14 inch Penguin system
Specs compared
| Model | HQ Score | Outer bat | Inserts | Material | Pin spacing | Warranty |
|---|---|---|---|---|---|---|
| Penguin Pottery Bats | 9.6/10 | 14 inch | 5 square inserts | Medex MDF | Not stated | Lifetime |
| Bleecker Bat System | 9.6/10 | 12 inch | 6 square inserts | Masonite, exterior-grade wood | 10 inch on center | Not stated |
| VFIUME Bat System | 9.5/10 | 12 inch | 6 aluminum plates | PVC, aluminum alloy | Pre-drilled holes | 2 year |
| Pasler Bat System | 9.5/10 | 12 inch | 5 inset bats | Composite plastic | Not stated | 1 year |
| SpaceSaver Bat System | 9.5/10 | Not stated | 8 bats | Exterior-grade MDF | 10 inch on center | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 22 November 2026. Bat size is the outer bat or base bat diameter.
What the listings tell you, and what they leave out
We read 5 pottery bat listings for this guide. Only 3 stated a warranty term: a lifetime warranty, a 2 year manufacturer warranty and a 1 year warranty. Only 2 stated pin spacing of 10 inches on center for standard wheel heads. Two of the five are 12 inch systems with 7 inch square inserts, and one is a 14 inch system with square inserts.
Pin spacing is the figure to confirm first: two systems state 10 inches on center, and the rest give pre-drilled holes or pins without a spacing figure. Treat the stated figures as the maker word, and confirm pin spacing against the wheel head before ordering.
Buying guide: choosing the best pottery bat system
Bat size and insert count
Outer bats here run 12 to 14 inches, with the Penguin system at 14 inches and the Bleecker, VFIUME and Pasler systems at 12 inches. Insert counts run from 5 to 8: the Pasler and Penguin systems hold 5 inserts, the Bleecker and VFIUME systems hold 6, and the SpaceSaver set holds 8 bats. More inserts mean more pots drying at once, so match the count to how many pieces a throwing session produces.
Material: Masonite, MDF, aluminum or plastic
Masonite inserts absorb water, so a pot releases from the insert as it dries. Medex MDF and exterior-grade MDF give a stiff, flat surface, with the SpaceSaver bats cut from 1/2 inch MDF and the Penguin inserts at 1/4 inch. Aluminum alloy plates at 1.5 mm give a thin, replaceable surface on the VFIUME bat, while the Pasler system uses composite plastic that resists water and deformation. Pick the material that matches the clay and the drying routine.
Pin spacing and wheel fit
Two systems state pin holes spaced 10 inches apart on center for standard wheel heads: the Bleecker system and the SpaceSaver set. The VFIUME bat has pre-drilled holes for most standard pottery wheels, and the Pasler kit includes 2 stainless steel bat pins. The Penguin system states no pin spacing, so check the wheel head before ordering. Confirm the connector and the pin fit before buying, since a bat that will not seat on the wheel head cannot be used.
What a bat system will not do
A bat system does not dry a pot on its own: the pot still needs air-drying time on the bat before trimming. Square inserts suit mugs, pots and small pieces, and the systems here top out at 14 inches. If the work runs larger than the bat, a bigger bat is the answer, not more inserts.
Project Match
- Mugs and small pieces: the Penguin system, with 5 square inserts for mugs, pots and small pieces.
- Back-to-back throwing sessions: the Pasler kit, with 5 inset bats that rotate for continuous throwing.
- Drying pots on the bat: the Bleecker system, with Masonite inserts that absorb water so pots release as they dry.
- Eight bats for a busy studio: the SpaceSaver set, with 8 two-sided MDF bats.
- Replaceable metal plates: the VFIUME system, with 6 replaceable aluminum alloy plates.
How the scores add up
Each bat system is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Penguin Pottery Bats | 9.6 | 30 | 22 | 21 | 0 | 5 |
| Bleecker Bat System | 9.6 | 30 | 22 | 21 | 7 | 0 |
| VFIUME Bat System | 9.5 | 29 | 21 | 20 | 0 | 4 |
| Pasler Bat System | 9.5 | 29 | 21 | 21 | 0 | 3 |
| SpaceSaver Bat System | 9.5 | 29 | 21 | 21 | 0 | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.
FAQ: lasers and CNC
What size bat system fits a standard pottery wheel?
Two systems here state pin holes spaced 10 inches apart on center for standard wheel heads: the Bleecker system and the SpaceSaver set. The VFIUME bat has pre-drilled holes for most standard pottery wheels. Measure the wheel head and the pin spacing before ordering.
How many bats come in a bat system?
The systems here hold 5 to 8 bats: the Penguin and Pasler systems hold 5, the Bleecker and VFIUME systems hold 6, and the SpaceSaver set holds 8. The Bleecker and Pasler systems add a 12 inch outer or base bat, and the Pasler kit adds 2 stainless steel bat pins.
What are pottery bats made of?
The systems here use Masonite inserts, Medex MDF, exterior-grade MDF, aluminum alloy plates and composite plastic. The Bleecker inserts are Masonite, the Penguin inserts are Medex MDF, the SpaceSaver bats are 1/2 inch exterior-grade MDF, the VFIUME plates are 1.5 mm aluminum alloy, and the Pasler system is composite plastic.
Do these bat systems include bat pins?
The Bleecker system includes bat pins, and the Pasler kit includes 2 stainless steel bat pins. The other systems do not name pins in their contents, so check before ordering if pins are needed.
Related: the pottery and glass hub, best pottery tools, best clay for pottery, and pottery wheel for beginners. Also see our best pottery kit for adults and clay types.




