Best Mini Table Saw for Crafts (2026): 5 Picks for Models and Small Cuts
Dual-motor and single-motor mini table saws for model making, balsa wood, PCB and acrylic, compared by blade size, tabletop, speed and safety.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best Overallcropyoyo TJ0039.6/10View on Amazon - 2
Best for Model MakingNicklaua TJ-049.6/10View on Amazon - 3
Best for Small SpacesMXBAOHENG S39.4/10View on Amazon - 4
Best Accessory SetMIMYTH MBBT250199.5/10View on Amazon
A model hull, a balsa wing rib, a PCB enclosure: small parts need a saw that cuts straight without taking over the bench. The best mini table saw for crafts holds a steady angle, swaps blades without a teardown, and fits the materials the project uses.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall cropyoyo TJ003: 80-85mm blade, 8.5 x 6.5 inch tabletop, 200W and 18,000 RPM, with an interlock and a shield. Check price on Amazon
- Best for Model Making Nicklaua TJ-04: Dual 795 motors, 7 speeds, 4 blades and a 6mm alloy tabletop, with over 100 accessory parts. Check price on Amazon
- Best for Small Spaces MXBAOHENG S3: Palm-size at 7 x 5.5 x 3 inches and 4.2 lbs, with a 7-speed adapter and a 1 year warranty. Check price on Amazon
- Best Accessory Set MIMYTH MBBT25019: 105 rotary tool accessories, 20 sanding paper, dual 795 motors and 4 blades in one set. Check price on Amazon
Machines on the list

Mini Table Saw,Mini Table Saws
A dual 795 motor mini table saw with an 80-85mm blade, an 8.5 x 6.5 inch tabletop, 200W and 18,000 RPM, and a 7-speed adapter.
Pros
- 80-85mm upgraded blade, larger than the 60-63mm blades on the smaller saws
- 8.5 x 6.5 inch thickened aluminum tabletop for bigger boards
- Maximum output of 200W and 18,000 RPM
- Small-window blade change with just two screws, saving 80% of operation time
Cons
- The largest saw here, so it needs the most bench space
- The dust outlet needs a vacuum connected for cleanup
- No warranty term is stated
- The 80-85mm blades suit bigger boards rather than the smallest miniature cuts

Mini Table Saw, Mini Saw for Crafts
A dual 795 motor mini table saw with 7 speeds, 4 blades, a 6mm aluminum alloy tabletop and an interlock that prevents simultaneous starts.
Pros
- Dual 795 pure copper motors with a switch for each function
- 4 blades: PCB, high-speed steel, alloy and resin, for boards, wood, acrylic, metal and balsa
- 6mm aluminum alloy tabletop with laser-etched scale markings
- Rubber feet reduce vibration by 75%, with a transparent safety shield
Cons
- Blades are 2.5-inch, smaller than the 80-85mm blade on the cropyoyo
- No warranty term is stated
- The 8.0 x 4.0 x 3.0 inch body is larger than the palm-size MXBAOHENG
- The vacuum port needs a vacuum connected for cleanup

MIMYTH Mini Table Saw for Crafts
A dual 795 motor mini table saw with 4 blades, a 7-speed adapter, a miter gauge and 105 rotary accessories, at 3.25 lbs.
Pros
- Dual 795 pure copper motors, each operating independently
- 4 blades of 2.5 inches: PCB, high-speed steel, alloy and resin
- 105 rotary tool accessories, 20 sanding paper, miter gauge and slide rail in the box
- At 3.25 lbs and 7.1 x 5.5 x 2.5 inches, it packs away for small workspaces
Cons
- Blades are 2.5-inch, smaller than the 80-85mm blade on the cropyoyo
- The 7.1 x 5.5 x 2.5 inch tabletop limits board size
- 105 rotary accessories and 20 sanding papers add up to a large kit to store
- No dust extraction port is stated, unlike the Nicklaua TJ-04 and the cropyoyo

Mini table Saw,mini Table Saws for Crafts
A dual-motor mini table saw with 4 blades, adjustable height from 0 to 16mm, angles from 0 to 90 degrees and over 100 small parts.
Pros
- Two independent pure copper motors with a switch for each function
- 4 blades: PCB, high-speed steel, alloy and resin
- Blade height adjusts from 0 to 16mm for the thickness of the material
- Transparent safety shield and anti-slip shock-absorbing rubber feet
Cons
- The drill chuck holds shanks from 0.5-3.2mm only
- Blades are 2.5-inch, smaller than the 80-85mm blade on the cropyoyo
- The 8.0 x 4.0 x 3.0 inch body is larger than the palm-size MXBAOHENG
- Built for small handicrafts, not larger boards

MXBAOHENG Mini Table Saw S3 Portable Precision
A palm-size mini table saw with a 7-speed adapter, cut depth from 0 to 0.59 inches, angles from 0 to 90 degrees and a 1 year warranty.
Pros
- Palm-size at 7 x 5.5 x 3 inches and 4.2 lbs for space-constrained workshops
- 7-speed adapter, with the maximum 24V setting for robust cutting power
- Cut depth from 0 to 0.59 inches, or 15mm, for precise depth control
- A 1 year warranty
Cons
- Palm-size at 7 x 5.5 x 3 inches, so larger boards do not fit
- Suited to chopsticks, small sticks and model material, not larger boards
- No transparent shield is stated, unlike the other saws here
- No spare blades are stated in the box
Other machines to compare
Mini table SawCheck price on Amazon
Wixey Digital Angle Gauge for Table Saw & Miter SawCheck price on Amazon
2 Pack Crosscut Sled for Table SawCheck price on Amazon
POWERTEC 71828 Table Saw Angle GaugeCheck price on Amazon
POWERTEC Deluxe Magnetic Push Stick Fits Table SawCheck price on Amazon
Specs compared
| Model | HQ Score | Blade | Tabletop | Speeds | Safety |
|---|---|---|---|---|---|
| cropyoyo TJ003 | 9.6/10 | 80-85mm | 8.5 x 6.5 inches | 7-speed | Interlock, shield |
| Nicklaua TJ-04 | 9.6/10 | 2.5-inch | 6mm alloy | 7 speeds | Interlock, shield |
| MIMYTH MBBT25019 | 9.5/10 | 2.5-inch | 7.1 x 5.5 x 2.5 inches | 7-speed | Guard |
| Nicklaua TJ001 | 9.5/10 | 2.5-inch | 8.0 x 4.0 x 3.0 inches | Not stated | Shield |
| MXBAOHENG S3 | 9.4/10 | Not stated | 7 x 5.5 x 3 inches | 7-speed | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 13 November 2026.
Most mini table saw listings are multi-tools
A search for mini table saws turns up machines that cut, grind, polish and drill, so the picks above were chosen for the cutting work first: blade size, table size, angle control and the speeds the adapter offers. The grinding, sanding and drilling extras matter, but they do not make up for a saw that cannot hold a straight cut.
Buying guide: best mini table saw for crafts
Match the saw to the material
The Nicklaua and MIMYTH saws list 4 blade types: PCB, high-speed steel, alloy and resin, for circuit boards and plastics, thin wood and acrylic, aluminum and copper tubes, and balsa wood and basswood. The cropyoyo saw adds an 80-85mm blade for bigger boards and deeper cuts, while the MXBAOHENG suits chopsticks, small wooden sticks, model material, balsa wood, thin wood, basswood craft board, PCB, acrylic and plastic.
Blade size and cut depth
Blade height runs from 0 to 0.59 inches on the Nicklaua TJ-04, the MXBAOHENG and the MIMYTH, and the cropyoyo lists 0 to 16mm. Blades run 2.5 inches on the Nicklaua and MIMYTH saws, 63 millimeters across with a 16-millimeter inner hole on the TJ-04, and 80-85mm on the cropyoyo. Check the blade size before ordering, since the smallest blades suit miniature work and the largest suit bigger boards.
Speeds and power
The MXBAOHENG, MIMYTH and cropyoyo saws run a 7-speed power adapter, and the cropyoyo states a maximum output of 200W and 18,000 RPM. The Nicklaua TJ-04 lists 7 speeds and dual 795 motors with a switch for each motor, so only the function in use runs. Match the speed to the material: lower speeds suit fragile materials, and the maximum 24V setting on the MXBAOHENG delivers its robust cutting power.
Safety and dust
The Nicklaua saws, the MIMYTH and the cropyoyo each state a transparent shield or guard, and the Nicklaua TJ-04 and the cropyoyo state an interlock that prevents simultaneous starts. The TJ-04 and the cropyoyo also state a dust extraction port, and the TJ-04 adds a vacuum port. Rubber feet steady the saw: the TJ-04 states its feet reduce vibration by 75%.
Project Match
- Model building and miniature wood crafts: MXBAOHENG S3 and Nicklaua TJ-04, for balsa wood, basswood and small wooden sticks.
- PCB and electronic enclosures: Nicklaua TJ-04 and MIMYTH, for PCB cutting blades and circuit boards.
- Small metal parts: Nicklaua TJ-04 and cropyoyo TJ003, for aluminum and copper tubes and soft metals.
- Balsa wood and basswood models: MIMYTH and Nicklaua TJ001, for resin blades and balsa wood.
- Engraving and drilling extras: Nicklaua TJ-04 and cropyoyo TJ003, for flexible shafts and engraving.
How the scores add up
Each saw is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| cropyoyo TJ003 | 9.6 | 32 | 21 | 21 | 5 | 0 |
| Nicklaua TJ-04 | 9.6 | 30 | 21 | 21 | 5 | 0 |
| MIMYTH MBBT25019 | 9.5 | 29 | 20 | 20 | 5 | 0 |
| Nicklaua TJ001 | 9.5 | 28 | 20 | 20 | 5 | 0 |
| MXBAOHENG S3 | 9.4 | 27 | 20 | 19 | 0 | 2 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.
FAQ: lasers and CNC
What size blade does a mini table saw for crafts use?
The Nicklaua and MIMYTH saws include 2.5-inch blades, the TJ-04 lists a 63 millimeters diameter with a 16-millimeter inner hole, and the cropyoyo lists an 80-85mm upgraded blade.
Can a mini table saw cut PCB and acrylic?
The Nicklaua and MIMYTH saws list PCB cutting blades for circuit boards and plastics, and high-speed steel blades for thin wood and acrylic. The MXBAOHENG lists PCB, acrylic and plastic among its materials, and the cropyoyo lists wood, acrylic, PCB and soft metals.
How deep can these mini table saws cut?
Blade height runs from 0 to 0.59 inches on the Nicklaua TJ-04, the MXBAOHENG and the MIMYTH, and the cropyoyo lists 0 to 16mm. Lowering the blade reduces the exposed parts and the risk of material bouncing.
Do these saws work at an angle?
The Nicklaua TJ-04, the MXBAOHENG, the MIMYTH and the cropyoyo list cutting angles from 0 to 90 degrees, with a laser-engraved or laser-etched scale for setting the angle. The MXBAOHENG notes 45° bevel cuts.
What comes in the box with these mini table saws?
The Nicklaua TJ-04 and TJ001 come with over 100 accessory parts, the MIMYTH lists 105 rotary tool accessories and 20 sanding paper, and the cropyoyo lists over 100 accessory parts.
Related: best craft knife, best mini paper cutter for crafting and the craft storage hub. Also see our best cutting mat for paper crafts. Also see our sewing table vs sewing cabinet. Also see our best pegboard hooks. Also see our best craft room storage.




