Best Metric Cutting Mat (2026)
Five metric cutting mats compared by size, layers, grid lines and angles, from a 24 x 36 in Dahle to a 2-piece A3 and A4 ZenBeya set.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallDahle Vantage 106739.7/10View on Amazon - 2
Best A1 MatXNM A1 24 x 369.6/10View on Amazon - 3
Best A2 MatKEARING A2 24 x 189.6/10View on Amazon - 4
Best SetZenBeya A3 and A4 Set9.6/10View on Amazon
A cutting mat is the quiet partner in a maker project: it takes the blade so the bench does not, and its grid keeps every cut square. Whether the work is a leather patch, a quilt block, a paper model or a fabric panel, the mat underneath decides how clean the edge comes out. A best metric cutting mat adds metric guides to that grid, so measurements in millimetres sit right where the blade runs, and the mats below are compared by size, layers, grid and angles.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Dahle Vantage 10673: Largest mat here at 24 x 36 in, with metric, inch and angled guides and a 90 day warranty Check price on Amazon
- Best A1 Mat XNM A1 24 x 36: 24 x 36 in with metric and imperial grids, a 1/2 in grid with 1/8 in marks and 30, 45, 60 and 90 degree guides Check price on Amazon
- Best A2 Mat KEARING A2 24 x 18: 24 x 18 in with inch and metric grids on both sides and an anti-glare surface Check price on Amazon
- Best Set ZenBeya A3 and A4 Set: 2 mats, A3 and A4, with printed metric guides in a 5-layer build Check price on Amazon
Machines on the list

Dahle Vantage 10673 Premium Self-Healing Cutting
A 24 x 36 in self-healing cutting mat with a 1/2 in grid, 5 layers and inch, metric and angled trimming guides.
Pros
- 24 x 36 in mat with a 22 x 34 in measurement grid
- Inch, metric and angled trimming guides
- 5-layer design for durability
- 90 day limited warranty stated
Cons
- No double-sided build is stated
- Grid area is 22 x 34 in, smaller than the mat
- No thickness in millimetres is stated
- No angle figures are stated, only angled guides

XNM Premium Self Healing Cutting Mat
A 24 x 36 in A1 self-healing mat with metric and imperial grids, a 1/2 in grid with 1/8 in marks and 30, 45, 60 and 90 degree guides.
Pros
- 24 x 36 in A1 size with metric and imperial grids
- 1/2 in grid with 1/8 in marks and 30, 45, 60 and 90 degree guides
- 3 mm thick, 3-layer self-healing PVC
- Non-slip surface for making art
Cons
- No warranty term is stated
- 3 layers, fewer than the 5-layer mats here
- No grid area separate from the mat size is stated
- No anti-glare surface is stated

KEARING Large A2 Self-Healing Cutting Mat
A 24 x 18 in A2 self-healing mat with inch and metric grids on both sides, 5 layers of PVC and an anti-glare surface.
Pros
- 24 x 18 in A2 size with inch and metric grids on both sides
- 5-layer PVC with self-healing properties
- Non-slip and anti-glare surface
- Non-toxic and odorless PVC, per the listing
Cons
- No warranty term is stated
- Smaller than the 24 x 36 in mats here
- No thickness is stated
- No grid spacing is stated

2 Pcs Large Cutting Mat, A3 & A4 Black
A 2-piece set of self-healing mats, A3 at 450 x 300 mm and A4 at 300 x 220 mm, with printed metric guides and 5-layer PVC.
Pros
- 2 mats in one set, A3 and A4
- Printed metric guides with grid lines and angles
- White hardness PVC middle layer helps prevent cutting through
- Lightweight and easy to carry, per the listing
Cons
- No warranty term is stated
- No thickness is stated
- No imperial grid is stated
- No angle figures are stated, only angles in general

Headley Tools 18"x12" Thickened Self Healing
An 18 x 12 in A3 self-healing mat in 5-ply PVC, double sided, 3 mm thick, for crafts, sewing, quilting and leather work.
Pros
- 18 x 12 in A3 size for small and medium projects
- 5-ply PVC, double sided, 3 mm thick
- Self-healing surface that re-seals after every cut
- Stated for crafts, sewing, quilting, fabric and leather
Cons
- No metric grid is stated
- No warranty term is stated
- Smallest mat here at 18 x 12 in
- No angle guides are stated
Other machines to compare
anezus Self Healing Sewing MatCheck price on Amazon
Fiskars 18" x 24" Self Healing Cutting Mat for Quilting &Check price on Amazon
Self Healing Cutting Mat 18" x 12"Check price on Amazon
SENTK Upgraded A1 Thickened Self Healing Cutting MatCheck price on Amazon
XNM Premium Self Healing Cutting MatCheck price on Amazon
Specs compared
| Model | HQ Score | Size | Layers | Grid | Angles | Warranty |
|---|---|---|---|---|---|---|
| Dahle Vantage 10673 | 9.7/10 | 24 x 36 in | 5 | 1/2 in, metric and inch | Angled guides | 90 days |
| XNM A1 24 x 36 | 9.6/10 | 24 x 36 in | 3 | 1/2 in, metric and imperial | 30, 45, 60, 90 | Not stated |
| KEARING A2 24 x 18 | 9.6/10 | 24 x 18 in | 5 | Inch and metric | 30, 45, 60 | Not stated |
| ZenBeya A3 and A4 Set | 9.6/10 | 450 x 300 mm and 300 x 220 mm | 5 | Metric | Not stated | Not stated |
| Headley A3 18 x 12 | 9.4/10 | 18 x 12 in | 5 | Not stated | Not stated | Not stated |
These numbers come straight from each maker’s listing and are rated, not measured by us (5 November 2026). Grid is the printed measurement grid on the mat.
What the listings tell you, and what they leave out
Only the Dahle listing stated a warranty term, at 90 days. The Headley listing states no grid at all, while the other listings state metric grids. The Headley and XNM mats state a thickness of 3 mm.
Treat a mat with no stated grid as a plain cutting surface, and measure against a ruler instead of the mat.
Buying guide: choosing a best metric cutting mat
Size: A3, A2 and A1
The Headley mat is 18 x 12 in, listed as A3. The KEARING mat is 24 x 18 in, listed as A2. The XNM and Dahle mats are 24 x 36 in, with the XNM listed as A1. The ZenBeya set pairs an A3 mat at 450 x 300 mm with an A4 mat at 300 x 220 mm. Measure the bench before ordering, and leave room around the mat for the material and the ruler.
Metric grids and angles
A metric grid is the point of this guide. The Dahle mat states inch, metric and angled trimming guides, with a 1/2 in grid and a 22 x 34 in screened area. The XNM mat states metric and imperial measurement, a 1/2 in grid with 1/8 in marks, and 30, 45, 60 and 90 degree guides. The KEARING mat states inch and metric grids on both sides, with 30, 45 and 60 degree angles. The ZenBeya mats state printed metric guides, grid lines and angles. The Headley mat states no grid, so it suits work where the grid does not matter.
Layers and thickness
Layers are the mat’s body. The Dahle, KEARING and ZenBeya mats state 5 layers, the XNM mat states 3 layers, and the Headley title states 5-ply. The Headley and XNM mats state a thickness of 3 mm, and the Dahle mat states a thickness of 1/8 in. A thicker mat takes more cuts before the blade reaches the bench.
Double-sided mats
The Headley, XNM, ZenBeya and KEARING mats are double sided, so a worn side can be flipped. The Dahle listing does not state a double-sided build.
What a cutting mat will not do
A cutting mat protects the bench and guides the blade, but it does not sharpen a dull blade or fix a warped sheet. If the blade drags, change the blade, not the mat.
Rotary cutters and craft knives are sharp, and a mat that slips is the usual cause of a cut going where it should not. Keep fingers behind the ruler edge, cut away from the body, and store blades covered when the mat is not in use. Never cut toward a hand holding the material.
Project Match
- Quilting and sewing: the Dahle mat at 24 x 36 in, the XNM mat at 24 x 36 in and the KEARING mat at 24 x 18 in, all with metric grids for fabric cuts.
- Leather work: the Headley mat, stated for leather cutting, and the ZenBeya mats, stated for leatherwork.
- Paper and card models: the ZenBeya A4 mat at 300 x 220 mm for smaller sheets.
- Large layouts: the Dahle and XNM mats at 24 x 36 in.
How the scores add up
Each mat is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Dahle Vantage 10673 | 9.7 | 32 | 22 | 20 | n/a | 2 |
| XNM A1 24 x 36 | 9.6 | 30 | 20 | 21 | n/a | 0 |
| KEARING A2 24 x 18 | 9.6 | 28 | 21 | 20 | n/a | 0 |
| ZenBeya A3 and A4 Set | 9.6 | 27 | 20 | 21 | n/a | 0 |
| Headley A3 18 x 12 | 9.4 | 23 | 19 | 19 | n/a | 0 |
Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total. With no power and no stated safety feature, the safety row shows n/a and the score comes from 90 points.
FAQ: lasers and CNC
What size is a metric cutting mat?
The mats here run from 18 x 12 in to 24 x 36 in, and the ZenBeya set adds metric sizes at 450 x 300 mm and 300 x 220 mm. Pick the size that fits the bench and the largest sheet the project needs.
Do all of these mats have a metric grid?
No. The Dahle, XNM, ZenBeya and KEARING mats state metric grids. The Headley mat states no grid at all.
How many layers do these mats have?
The Dahle, KEARING and ZenBeya mats state 5 layers, the XNM mat states 3 layers, and the Headley title states 5-ply.
Are these mats double sided?
The Headley, XNM, ZenBeya and KEARING mats are double sided. The Dahle listing does not state a double-sided build.
Which mat has a warranty?
Only the Dahle listing states a warranty term, a 90 day limited warranty against defects in manufacturing, materials and assembly.
Related: the craft machines hub, cutting machines, best cutting mat 24 x 36, best double sided cutting mat, best sewing cutting mat, best rotary paper cutter, best quilting machine for home use, best craft machines for stickers, and best craft machine for making money.




