Best Label Maker for Wires (2026): 5 Picks for Panels and Cables
Five handheld label makers for wire and cable work, compared by tape width, heat shrink support, power and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallVixic DM1709.6/10View on Amazon - 2
Best Keyboard PickVixic E10009.6/10View on Amazon - 3
Best Wide TapeEpson LW-PX7009.5/10View on Amazon - 4
Best Heat Shrink KitVolenGo E1000 Kit9.4/10View on Amazon - 5
Best for Batch LabelsVolenGo E1000 Tape9.4/10View on Amazon
A wiring panel with unlabeled cables turns a simple fix into a guessing game. Tracing a wire by hand, pulling the wrong cable, then tracing it again eats the afternoon. The best label maker for wires ends that loop: clear wraps, flags and heat shrink labels that stay readable in a panel, a rack or a job site bag, so each cable answers for itself.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Vixic DM170: Bluetooth app control with serial numbers, a 1200mAh battery and a 4-pack tape bundle, at 0.7 lb. Check price on Amazon
- Best Keyboard Pick Vixic E1000: 500+ symbols with 37 electrical symbols, 16 fonts and up to 4 lines, plus a 2 year warranty. Check price on Amazon
- Best Wide Tape Epson LW-PX700: Tape up to 1 in (24 mm) wide with a print preview screen and a lifetime warranty. Check price on Amazon
- Best Heat Shrink Kit VolenGo E1000 Kit: 1 laminated tape pack and 2 heat shrink tube packs in the box, with a 2:1 shrink ratio. Check price on Amazon
- Best for Batch Labels VolenGo E1000 Tape: Three cable modes and batch printing that saves 22 inches of tape across 20 labels. Check price on Amazon
Machines on the list

Heat Shrink Wire Label Maker
A 0.7 lb Bluetooth label maker with a 1200mAh battery, a 203 DPI print head and a 4-pack tape bundle for heat shrink, flag and vinyl labels.
Pros
- Bluetooth control through the Print Master App, with templates for heat shrink, wire and cable labels
- Serial numbers in the app for batch cable and wire labeling
- 4-pack tape bundle: 2 packs of heat shrink tube, 1 flag-style nylon tape and 1 vinyl tape
- 1200mAh battery prints up to 588 labels of 2.1 inches on one charge
Cons
- Phone and the Print Master App are part of the workflow
- Bundle tapes are 12 mm and 11 mm; no wider tape is included
- One charge covers up to 588 labels, so long runs need a recharge
- 0.31-inch print margin still leaves blank tape on every label

Vixic Label Maker Waterproof-Labels
A keyboard label maker with 500+ symbols, 16 fonts and up to 4 lines of text, with a 12 mm laminated tape pack in the box.
Pros
- 500+ symbols, including 37 electrical symbols, plus 100+ frames and 16 fonts
- Prints up to 4 lines of text in large, medium and small font sizes
- One-touch keys for cable wrap, cable flag and faceplate labels
- Runs on 6 AAA batteries or the included 2.6 ft USB-C cable
Cons
- Heat shrink tube tapes are sold separately
- 6 AAA batteries are not included
- Only 1 pack of 12 mm tape is in the box
- Mirror mode must be switched on for heat shrink and off for laminated tape

Epson LABELWORKS LW-PX700 Industrial Label Maker
An industrial handheld label maker with a print preview screen and tape up to 1 in wide, for heat shrink, self-laminating wrap and vinyl.
Pros
- Prints tape up to 1 in (24 mm) wide, the widest here
- Print preview screen shows the label before printing
- Works with heat shrink tube, self-laminating wrap, vinyl and standard industrial tape
- Lifetime warranty, with replacement in the United States and Canada
Cons
- Runs on the included AC adapter, with no battery option in the kit
- Only 1 cartridge of standard industrial tape is in the box
- Lifetime warranty applies only in the United States and Canada
- No tape wider than 1 in (24 mm) is supported

VolenGo E1000 Heat Shrink Label Maker Machine
A VolenGo E1000 kit with 1 pack of laminated tape and 2 packs of heat shrink tube tape for cable identification.
Pros
- 2 packs of heat shrink tube tape and 1 pack of laminated tape in the box
- Heat shrink tube has a 2:1 shrink ratio for a snug fit on wires and cables
- Tube is rated 300V/125°C (257°F)/VW-1
- One-touch keys for wire and cable wraps, flags, Code 39 and Code 128 barcodes, fixed-length and breaker labels
Cons
- No warranty term is stated
- No power source is stated
- Heat shrink labels need a heat gun to finish
- Tube fit is limited to cables from 3.6 to 7.0 mm in diameter

Label Maker Machine with-Tape
A QWERTY keyboard label maker with three cable modes, dual power and laminated tape for wire and cable labels.
Pros
- Three cable modes for quick wire labeling
- QWERTY keyboard for fast typing
- Runs on 6 AAA batteries or the included USB-C cable
- Prints 263 ft of tape on 6 full-power dry cells
Cons
- No warranty term is stated
- 6 AAA batteries are not included
- Heat shrink labels need a heat gun to finish
- Tape in the box is 12 mm; no wider tape is stated
Other machines to compare
VolenGo Label Maker Machine with-TapeCheck price on Amazon
Phomemo Label MakerCheck price on Amazon
SUPVAN E11 Keyboard & Bluetooth Label Maker Machine with 4Check price on Amazon
Phomemo D30 Label Maker Machine with TapeCheck price on Amazon
Brother P-Touch PT-N20 Personal Desktop Label MakerCheck price on Amazon
Specs compared
| Model | HQ Score | Tape width | Label types | Power | Tapes in the box | Warranty |
|---|---|---|---|---|---|---|
| Vixic DM170 | 9.6/10 | 12 mm | Heat shrink, flag, vinyl | 1200mAh battery, USB-C | 4-pack bundle | 2 years |
| Vixic E1000 | 9.6/10 | 12 mm | Laminated, heat shrink (sold separately) | 6 AAA batteries or USB-C | 1 pack, 12 mm x 4 m laminated | 2 years |
| Epson LW-PX700 | 9.5/10 | Up to 1 in (24 mm) | Heat shrink, self-laminating wrap, vinyl, standard | AC adapter | 1 cartridge, 212VTBWPX | Lifetime |
| VolenGo E1000 Kit | 9.4/10 | 12 mm | Heat shrink, laminated | Not stated | 1 laminated, 2 heat shrink | Not stated |
| VolenGo E1000 Tape | 9.4/10 | 12 mm | Laminated, heat shrink | 6 AAA batteries or USB-C | Laminated tape included | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 19 November 2026.
Heat shrink, laminated or flag: pick the label type
Wire labels here come as heat shrink tube, laminated tape or flag-style nylon, and the shape matters more than the machine. Heat shrink tube slides over a wire and shrinks tight with a heat gun, so it stays put on cables pulled through panels and racks. Laminated tape wraps a cable or sticks as a flag, and the maker rates it against water, oil, smear, chemicals and abrasion. Flag-style nylon tape folds around a cable and leaves a readable tab, which suits dense panels.
All 5 picks print 12 mm tape, and only the Epson LW-PX700 prints wider tape, up to 1 in (24 mm). A panel with long circuit names wants the wider tape, while a crowded data closet is fine with 12 mm. The VolenGo kit states its flattened tube at 11.7 mm for cables from 3.6 to 7.0 mm in diameter, so measure the cable before choosing a tube size.
Buying guide: best label maker for wires
Match the tape to the wire
Begin with the cable, not the machine. Heat shrink tube suits permanent identification on wires that move, since the tube grips the cable after heating. Laminated tape suits wraps and flags on cables that stay in a panel, and the Vixic E1000 includes 1 pack of 12 mm by 4 m laminated tape for that job. The DM170 bundle includes heat shrink, flag and vinyl tapes together.
Width and cable fit
Tape width sets the label, and the tube sets the cable. The PX700 prints tape up to 1 in (24 mm) wide for long names, while the other picks print 12 mm tape. The VolenGo kit fits cables from 3.6 to 7.0 mm in diameter with an 11.7 mm flattened tube, so check the cable against the tube before ordering.
Power on a job site
A label maker that dies mid-panel is a paperweight. The DM170 runs on a 1200mAh rechargeable battery and prints up to 588 labels of 2.1 inches on one charge, for field work with USB-C charging. The Vixic E1000 and the VolenGo E1000 Tape run on 6 AAA batteries or a USB-C cable, and 6 full-power cells print 263 ft of tape. The PX700 runs on its included AC adapter, so it suits a bench with an outlet nearby.
Batch labels without waste
Panels mean repeats, so batch tools matter. The DM170 app supports serial numbers for batch cable and wire labeling, and its 0.31-inch print margin cuts blank tape waste on long runs. The Vixic E1000 chain print edits up to 20 labels and saves 0.8 inch on each label, and the VolenGo E1000 Tape saves 22 inches of tape by printing 20 labels at a time. The Vixic E1000 also copies up to 9 labels with Shift and Print.
Project Match
- Electrical panels and breaker labels: VolenGo E1000 Kit, with one-touch keys for breaker labels.
- Data closets and network racks: Vixic DM170, with serial numbers in the app and templates for cable and wire labels.
- Industrial labeling and wide tape: Epson LW-PX700, with tape up to 1 in (24 mm) wide and a print preview screen.
- Bench labeling with a keyboard: Vixic E1000, with 500+ symbols, 16 fonts and up to 4 lines of text.
- Batch wire labels at a desk: VolenGo E1000 Tape, with three cable modes and batch printing that saves tape.
How the scores add up
Each machine is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Vixic DM170 | 9.6 | 32 | 22 | 21 | 0 | 4 |
| Vixic E1000 | 9.6 | 30 | 21 | 20 | 0 | 4 |
| Epson LW-PX700 | 9.5 | 29 | 21 | 19 | 0 | 4 |
| VolenGo E1000 Kit | 9.4 | 28 | 20 | 20 | 0 | 0 |
| VolenGo E1000 Tape | 9.4 | 28 | 20 | 19 | 0 | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.
FAQ: lasers and CNC
What kind of label lasts longest on a wire?
Heat shrink tube grips the cable after heating, with a 2:1 shrink ratio on the VolenGo tubes, while laminated tape resists water, oil, smear, chemicals and abrasion. For cables that get pulled or flexed, heat shrink is the tougher shape; for wraps and flags in a panel, laminated tape holds up well.
What tape width do I need for wire labels?
All 5 picks print 12 mm tape, which covers wraps, flags and short names. For longer names, the Epson LW-PX700 prints tape up to 1 in (24 mm) wide. For heat shrink, the VolenGo kit fits cables from 3.6 to 7.0 mm in diameter.
Can these label makers print barcodes?
Yes, most of them. The Vixic E1000, the DM170 app and both VolenGo E1000 models support Code 39 and Code 128 barcodes. The Epson LW-PX700 states no barcode format.
Do I need anything else to use heat shrink labels?
Yes, a heat gun. Heat shrink tube shrinks tight only when heated. The DM170 bundle and the VolenGo kit each include 2 packs of heat shrink tube, and the Vixic E1000 needs heat shrink tubes bought separately. The best heat gun for shrink tubing guide covers that tool.
Related: best label maker for cables, best label maker for electricians, best label maker for small business and the small business gear hub. Also see the label maker vs thermal label printer comparison.




