Best Jewelers Saw Blades (2026): 5 Picks for Fine Metal Cutting
Five 144-piece jewelers saw blade sets in sizes 4/0 to 2, compared by size range, blade length and what each listing states about materials and use.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallPike Swiss 4/09.7/10View on Amazon - 2
Best Assorted SetTAURISH 144-Piece Set9.6/10View on Amazon - 3
Best Single SizeTAURISH Size 1 Set9.6/10View on Amazon
A jeweler’s saw turns sheet metal into rings, pendants and pierced shapes, and the blade decides how clean the cut looks. The best jewelers saw blades hold a steady line through gold, silver, copper and brass, track curves without binding, and last through a full bench session without snapping. This guide uses only what each maker states about size range, blade length, materials and use, so you can match a set to the work on your bench.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Each set here holds 144 blades. The TAURISH assorted set spans sizes 4/0, 3/0, 2/0, 1/0, 1 and 2, while the other sets stick to a single size: 1, 2/0, 3/0 or 4/0. Blade length is stated for the TAURISH size 1 set at 5.2 inches, for the Grobet Pike 3/0 at 5.4 inches, and for the Pike Swiss 4/0 at 5.24 inches in its listed dimensions.
Quick picks
- Best Overall Pike Swiss 4/0: Made in Switzerland to exacting tolerances for angle, size and cut for each tooth, in size 4/0. Check price on Amazon
- Best Assorted Set TAURISH 144-Piece Set: 144 blades across sizes 4/0, 3/0, 2/0, 1/0, 1 and 2, with rounded backs and finely set teeth. Check price on Amazon
- Best Single Size TAURISH Size 1 Set: 144 blades in size 1 with a stated blade length of 5.2 inches, for ring sizing and fine cutting. Check price on Amazon
Machines on the list

Pike Swiss Brand Jeweler's Sawblades 144 4/0
Swiss-made jewelers saw blades in size 4/0, made to exacting tolerances for angle, size and cut for each tooth.
Pros
- Made in Switzerland, with exacting tolerances for angle, size and cut for each tooth
- Size 4/0 for the finest detail work in this guide
- Stated for cutting all metals and other hard materials
- 144 blades in the set, so spares are always on hand
Cons
- Single size only: no coarser blade in the box for thicker stock
- No warranty term is stated
- Size 4/0 is the finest size here, so blades snap more easily than coarser sizes
- No stated use for jewelry repair or ring sizing

Jewelers Saw Blades Set, Gross of 144 Pieces
A 144-piece set across sizes 4/0, 3/0, 2/0, 1/0, 1 and 2, for jewelry repair, ring sizing and fine cutting of gold, silver, copper and brass.
Pros
- 144 blades across sizes 4/0, 3/0, 2/0, 1/0, 1 and 2
- Rounded backs and finely set teeth help reduce binding and breakage
- Stated for jewelry repair, ring sizing, metal piercing, shaping and fine cutting
- Made with precision tolerances for uniform teeth and consistent cutting
Cons
- No blade length is stated
- No warranty term is stated
- Assorted sizes mean fewer blades of the size you use most
- Fine sizes in the set snap more easily than coarse sizes

Jewelers Saw Blades, 144 Pieces for Jewelry
144 jewelers saw blades in size 1, with a stated blade length of 5.2 inches, for jewelry repair, ring sizing and fine cutting of gold, silver, copper and brass.
Pros
- 144 blades in size 1, the general piercing size in this guide
- Stated blade length of 5.2 inches
- Rounded backs and finely set teeth help reduce binding and breakage
- Stated for jewelry repair, ring sizing, metal piercing, shaping and fine cutting
Cons
- Single size only: no finer or coarser blade in the box
- No warranty term is stated
- Size 1 is coarser than the 4/0 and 3/0 sizes, so it suits general piercing over fine detail
- Blade thickness of 0.05 inches leaves little room for error on tight curves

Pike Jeweler's Saw Blades #3/0 144 Pack
Pike jewelers saw blades in size 3/0 from Grobet USA, in a 144-pack with a stated blade length of 5.4 inches.
Pros
- Pike blades in size 3/0 for fine lines and detail work
- Stated blade length of 5.4 inches
- 144 blades in the pack
- Golden straw color as listed
Cons
- No use notes for jewelry repair, ring sizing or piercing
- No warranty term is stated
- Single size only: no coarser blade in the box for thicker stock
- Listed thickness of 0.003937 inches is fine for detail and easy to snap

Pike 2/0 Jeweler's Sawblades, Alloy Steel
Pike jewelers saw blades in size 2/0, alloy steel and metal compatible, in a 144-pack.
Pros
- Alloy steel blades in size 2/0 for metal cutting
- 144 blades in the pack
- Metal compatible, per the listing
- Golden straw color as listed
Cons
- No blade length is stated
- No use notes for jewelry repair, ring sizing or piercing
- No warranty term is stated
- Size 2/0 is coarser than 3/0 and 4/0, so it suits general cutting over fine detail
Other machines to compare
Jewelers Saw BladesCheck price on Amazon
Pike Jeweler's Saw Blades #2/0 144 PackCheck price on Amazon
Specs compared
| Model | HQ Score | Sizes | Pack | Blade length | Materials |
|---|---|---|---|---|---|
| Pike Swiss 4/0 | 9.7/10 | 4/0 | 144 | 5.24 inches | All metals and other hard materials |
| TAURISH 144-Piece Set | 9.6/10 | 4/0, 3/0, 2/0, 1/0, 1, 2 | 144 | Not stated | Gold, silver, copper, brass and other alloys |
| TAURISH Size 1 Set | 9.6/10 | 1 | 144 | 5.2 inches | Gold, silver, copper, brass and other alloys |
| Grobet Pike 3/0 | 9.5/10 | 3/0 | 144 | 5.4 inches | Not stated |
| Pike 2/0 144-Pack | 9.4/10 | 2/0 | 144 | Not stated | Alloy steel, metal compatible |
These numbers come straight from each maker’s listing and are rated, not measured by us (20 November 2026). Size is the blade size the maker states; blade length is the longest dimension the listing gives.
What the listings tell you, and what they leave out
We read 5 listings for this guide. Each set holds 144 blades, and none of the 5 listings states a warranty term, so warranty scores 0 across the guide. Only the TAURISH listings describe use in words: jewelry repair, ring sizing, metal piercing, shaping and fine cutting of gold, silver, copper and brass. The Pike listings state less. The Pike 2/0 listing gives a size, a pack count, alloy steel and a golden straw color, and nothing else. The Grobet Pike 3/0 listing adds dimensions of 5.4 x 0.003937 x 0.003937 inches. The Pike Swiss 4/0 listing states Swiss manufacture and exacting tolerances for angle, size and cut for each tooth.
Treat a missing spec as unanswered, not as a fault in the blade. A 144-piece set with no stated blade length still fits a jeweler’s saw frame in regular bench work, but the listing does not confirm it, so check the frame fit before ordering when length matters to you.
Buying guide: choosing the best jewelers saw blades
Blade size
Blade size sets how tight a curve you can follow and how fine the cut looks. Size 4/0 is the finest size here, and size 2 is the coarsest. The TAURISH assorted set covers sizes 4/0, 3/0, 2/0, 1/0, 1 and 2 in a single box, which suits a bench that moves between piercing, shaping and fine cutting. A single-size set suits a bench that does the same cut again and again: size 1 for general piercing, size 2/0 or 3/0 for finer lines, size 4/0 for the finest detail work.
Pack size and spares
Each set here holds 144 blades, so a snapped blade costs little bench time when a spare sits in the box. Fine blades snap more often than coarse blades, which is why a mixed set earns its place on a bench that cuts curves in thin metal. Keep the spare blades dry and grouped by size, so the size you reach for is the size you meant to pick.
Materials and metals
The TAURISH listings name gold, silver, copper, brass and other alloys. The Pike Swiss listing covers all metals and other hard materials. The Pike 2/0 listing names alloy steel and metal compatibility. Match the blade to the metal on your bench, and keep blades for soft metals apart from blades used on harder stock, so a dull tooth does not drag across a soft surface.
Blade length and frame fit
A jeweler’s saw frame clamps the blade at both ends, so length decides whether the blade seats with the right tension. The TAURISH size 1 set states 5.2 inches, the Grobet Pike 3/0 states 5.4 inches, and the Pike Swiss 4/0 lists 5.24 inches in its dimensions. The TAURISH assorted set and the Pike 2/0 set state no blade length. When length is not stated, measure a blade from an earlier set that fits your frame and compare before ordering.
Project Match
Match the set to the project, using only what each listing states:
- Jewelry repair and ring sizing: TAURISH 144-Piece Set or TAURISH Size 1 Set, both stated for jewelry repair and ring sizing.
- Fine piercing in gold, silver, copper and brass: TAURISH 144-Piece Set, with sizes 4/0, 3/0, 2/0, 1/0, 1 and 2 in a single box.
- Detailed cutting in hard materials: Pike Swiss 4/0, made in Switzerland to exacting tolerances for each tooth.
- General metal cutting with a 2/0 blade: Pike 2/0 144-Pack, alloy steel and metal compatible.
- Work where blade length is stated: TAURISH Size 1 Set at 5.2 inches or Grobet Pike 3/0 at 5.4 inches.
How the scores add up
Each set is scored on performance, build, value, safety and warranty. How we pick explains the weights. A spec the listing does not publish scores nothing, which is why thin listings score lower even when the blades themselves may cut well.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Pike Swiss 4/0 | 9.7 | 32 | 22 | 21 | n/a | 0 |
| TAURISH 144-Piece Set | 9.6 | 30 | 21 | 20 | n/a | 0 |
| TAURISH Size 1 Set | 9.6 | 28 | 20 | 20 | n/a | 0 |
| Grobet Pike 3/0 | 9.5 | 28 | 20 | 18 | n/a | 0 |
| Pike 2/0 144-Pack | 9.4 | 26 | 18 | 18 | n/a | 0 |
Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.
FAQ: lasers and CNC
How do I use a jewelers saw?
Seat the blade in the frame with the teeth pointing toward the handle, tension it until it rings when plucked, and hold the work flat on the bench pin. Cut on the pull stroke with light pressure and let the teeth do the work, turning the work rather than twisting the blade on curves. A blade that binds or snaps is often a sign of too much pressure or a slack blade, so ease off and re-tension before carrying on.
How do I clean saw blades?
Brush metal dust from the teeth after a session, wipe the blade dry, and store it flat and dry so moisture does not dull the edge. A soft brush keeps the teeth clear without bending them. Keep sizes grouped so the size you reach for is the size you meant to pick.
What size jewelers saw blade should I start with?
Start with the assorted set. Sizes 4/0, 3/0, 2/0, 1/0, 1 and 2 cover fine piercing through general cutting, and the 144-piece count means a snapped blade is a small loss. Once you know which size you reach for most, a single-size set in 1, 2/0, 3/0 or 4/0 keeps that size on hand.
What metals can jewelers saw blades cut?
The TAURISH listings state gold, silver, copper, brass and other alloys. The Pike Swiss listing states all metals and other hard materials, and the Pike 2/0 listing states alloy steel with metal compatibility. Use a fine size for thin sheet and a coarser size for thicker stock, and keep the cut slow and steady on hard metals.
Related: the jewelry and lapidary hub, best jewelry tools, best jewelry making tools, best metal for stamping jewelry, best rock tumbler kit and how to clean jewelry.




