Best Honeycomb Bed for Xtool F1 (2026)
4 honeycomb beds compared by work area, material, included plate and warranty, with steel and aluminum options and title-only size options for laser cutting.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Largest BedNEJE Large Honeycomb Bed9.7/10View on Amazon - 2
Steel Bed with PlateToCome Steel Honeycomb Bed9.6/10View on Amazon - 3
440 mm SquareUniTak3D Honeycomb Bed9.6/10View on Amazon - 4
ToCome Steel Honeycomb Laser Bed 400 x 400mm 16 x 16" LaserView on Amazon - 5
Upgrade Honeycomb Laser Bed with Fixing Pins for XTool P3View on Amazon - 6
Puikos Honeycomb Laser Bed 400 x 400 mm Working Table ForView on Amazon - 7
2.0 Honeycomb Laser Bed for P2 P2S CO2 Laser Cutter SteelView on Amazon - 8
Dofiki Half Size Steel Honeycomb Bed for xTool P3 LaserView on Amazon - 9
Dofiki Honeycomb Laser Bed for Wecreate Vision 20W 40W LaserView on Amazon
When a maker wants clean cut parts, signs or small panels from a laser, the bed under the material decides how smoke clears and how flat the work sits. For the best honeycomb bed for xtool f1 search, compare work area, material, included plate and warranty, using only what each listing publishes. None of the listings here names the F1, so check the work area against the machine before ordering.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Affiliate disclosure.
Quick picks
- Largest Bed NEJE Large Honeycomb Bed: 530 by 850 mm bed, aluminum alloy and iron, 2-year warranty Check price on Amazon
- Steel Bed with Plate ToCome Steel Honeycomb Bed: 430 by 400 mm steel bed, aluminum sheet included, magnet hold-down option Check price on Amazon
- 440 mm Square UniTak3D Honeycomb Bed: 440 by 440 mm bed with aluminum plate, per its title Check price on Amazon
Machines on the list
NEJE Large Honeycomb Laser Bed Working Table
A large honeycomb bed of 530 by 850 mm in aluminum alloy and iron, with a sturdy frame and corner covers.
Pros
- Large 530 by 850 mm work area, the largest stated here
- Aluminum alloy and iron build, smooth and flat, per the listing
- Sturdy frame with protective covers at the four corners
- No assembly required, since the bed comes pre-assembled
Cons
- No F1 fit is named in the listing
- No plate is included in the stated components, only a sturdy frame
- Spec table lists shape as Round against rectangular dimensions
- 11 pound weight needs a firm bench spot
ToCome Honeycomb Laser Bed 430 x 400mm 17 x 16
A steel honeycomb bed with a usable area of 430 by 400 mm, honeycomb needles and an included aluminum sheet.
Pros
- Steel grid allows magnet hold-downs to keep material in place
- Included aluminum sheet protects the tabletop and collects debris
- Honeycomb needles help prevent material slippage, per the listing
- Usable area of 430 by 400 mm suits mid-size cutting work
Cons
- No F1 fit is named in the listing
- No warranty term is stated in the listing
- Outer size differs across the title, bullets and spec table
- Steel grid weighs on the bench with no weight stated
UniTak3D Honeycomb Laser Bed 440 x 440 mm Working
An all-metal 440 x 440 mm honeycomb bed with an actual 15.75 x 15.75 inch working area, aluminum base plate, measurement scale, and 10 silicone pads.
Pros
- Includes aluminum base plate, 4 corner protectors, 10 rivets, and 10 silicone pads
- Integrated measurement scale along the outer frame for quick workpiece alignment
- Black finish reduces beam reflection toward the diode module head
- Robust steel honeycomb core and all-metal construction weighing 5.63 pounds
Cons
- No warranty term is stated in the listing
- Actual working area of 15.75 x 15.75 inches is smaller than the 440 x 440 mm outer frame
- Spec table lists package dimensions of 19.02 x 18.7 x 1.65 inches rather than table height
- Does not include hold-down magnets for securing thin stock
Honeycomb Laser Bed Extension 37.4"x 18.1" for D1
Steel honeycomb extension bed with a 950 by 460 mm working area for extended D1 and D1 Pro frames, stated for magnet hold-downs.
Pros
- 950 x 460 mm working area suits extended D1 and D1 Pro frames
- Steel grid allows magnetic hold-downs for materials
- Hardened grid with riveted edges stated, plus an aluminum tray
- Fire and rust resistance stated
Cons
- No warranty term is stated
- Honeycomb needles are not included in the package
- 17.51 lb, the heaviest bed here
- Overall 994 x 504 x 22 mm needs a large bench
Other machines to compare
ToCome Steel Honeycomb Laser Bed 400 x 400mm 16 x 16" LaserCheck price on Amazon
Upgrade Honeycomb Laser Bed with Fixing Pins for XTool P3Check price on Amazon
Puikos Honeycomb Laser Bed 400 x 400 mm Working Table ForCheck price on Amazon
2.0 Honeycomb Laser Bed for P2 P2S CO2 Laser Cutter SteelCheck price on Amazon
Dofiki Half Size Steel Honeycomb Bed for xTool P3 LaserCheck price on Amazon
Dofiki Honeycomb Laser Bed for Wecreate Vision 20W 40W LaserCheck price on Amazon
Specs compared
| Honeycomb Bed | HQ Score | Work Area | Material | Included Plate | Warranty |
|---|---|---|---|---|---|
| NEJE Large Honeycomb Bed | 9.7/10 | 530 by 850 mm | Aluminum alloy and iron | Not stated | Two years |
| ToCome Steel Honeycomb Bed | 9.6/10 | 430 by 400 mm | Steel | Aluminum sheet | Not stated |
| UniTak3D Honeycomb Bed | 9.6/10 | 440 by 440 mm | Not stated | Aluminum plate | Not stated |
| Dofiki Honeycomb Extension | 9.5/10 | 950 by 460 mm | Not stated | Metal plate | Not stated |
Specifications are manufacturer rated as listed, collected 23 October 2026. One of the four states a warranty term, at two years.
How to choose the best honeycomb bed for xtool f1
Work area first, then the machine fit
Work area runs from 430 by 400 mm on the ToCome bed to 530 by 850 mm on the NEJE bed, with 440 by 440 mm on the UniTak3D bed and 950 by 460 mm on the Dofiki extension panel. A larger bed suits larger panels, but a bed that dwarfs the machine wastes bench space and leaves the work area unclear. Since no listing here names the F1, measure the machine bed and the bench, then match the listed work area to both.
Steel grid or aluminum alloy build
Material splits the two full-data beds. The ToCome bed uses a steel grid, which allows magnet hold-downs to keep material still during cutting, per its listing. The NEJE bed uses aluminum alloy and iron, with a smooth and flat surface and uniform honeycomb pores, per its listing. Steel suits magnet hold-downs, while the aluminum alloy bed suits a lighter bench setup at 11 pounds. See our honeycomb pins vs magnetic hold downs guide for hold-down options.
| Bed | Work area | Material | Plate |
|---|---|---|---|
| NEJE Large Honeycomb Bed | 530 by 850 mm | Aluminum alloy and iron | Not stated |
| ToCome Steel Honeycomb Bed | 430 by 400 mm | Steel | Aluminum sheet |
| UniTak3D Honeycomb Bed | 440 by 440 mm | Not stated | Aluminum plate |
| Dofiki Honeycomb Extension | 950 by 460 mm | Not stated | Metal plate |
Included plate and tabletop protection
Only the ToCome bed includes an aluminum sheet that protects the tabletop and collects debris, per its listing. The NEJE bed states that it protects the tabletop from burning, but its stated components list only a sturdy frame, with no plate named. The two title-only entries each name a plate in the title: aluminum on the UniTak3D bed and metal on the Dofiki extension. If the bench top must stay clean, a stated sheet or plate matters more than bed size alone. See our honeycomb bed for laser cutter guide for more bed options.
What the title-only entries can and cannot show
The UniTak3D and Dofiki entries come from titles only, with no bullets or spec tables to check. Their sizes, plates and machine lists come from the title alone, and no warranty, weight or safety feature is stated for either. Treat them as size options to check against the machine, not as checked picks, and put full-data beds first when comparing features.
Project Match
- Large panels: NEJE bed, with a 530 by 850 mm work area stated.
- Steel bed with magnet hold-downs: ToCome bed, with a steel grid and an included aluminum sheet stated.
- Square mid-size bed: UniTak3D bed, with a 440 by 440 mm working area stated in its title.
- Long extension panel: Dofiki extension, with a 950 by 460 mm panel stated in its title.
- F1 fit: Not stated for any pick here, since no listing names the F1.
How the scores add up
The HQ Score weighs performance, build, value, safety and warranty. For a honeycomb bed, safety means a stated frame, corner protection or tabletop protection. The NEJE bed states a sturdy frame with protective corner covers, the ToCome bed states an aluminum sheet that protects the tabletop, and the two title-only entries state no safety feature. One listing states a warranty term, the NEJE bed at two years. How we pick explains the weights.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| NEJE Large Honeycomb Bed | 9.7 | 32 | 22 | 21 | 5 | 3 |
| ToCome Steel Honeycomb Bed | 9.6 | 30 | 21 | 21 | 4 | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
FAQ: lasers and CNC
Do any of these beds state a fit for the XTool F1?
No listing here names the F1. The UniTak3D and Dofiki titles name D1 family machines, and the NEJE listing names NEJE machines, so check the work area against the F1 before ordering.
Which bed is largest?
The NEJE bed states 530 by 850 mm, the largest work area here. The Dofiki panel states 950 by 460 mm, which is longer in one direction but narrower in the other.
Which beds include a plate or sheet?
The ToCome bed includes an aluminum sheet, the UniTak3D title names an aluminum plate, and the Dofiki title names a metal plate. The NEJE listing names no plate in its stated components.
Do these beds state a warranty?
Only the NEJE bed states a warranty term, at two years. The ToCome listing and the two title-only entries state no warranty term.
More laser and CNC guides
See every laser accessories guide and all laser engravers guides. Also see our best honeycomb bed for XTool D1 Pro. Also see our best honeycomb bed for Xtool M1. Also see our honeycomb bed vs steel mesh bed.
