Best Laser Enclosure for Xtool M2 (2026): Picks Compared
Five laser enclosures for xTool M2 owners compared by size, ventilation fan, viewing window and warranty term, from integrated-bottom models to a foldable vent design.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCregrant3D Enclosure9.7/10View on Amazon - 2
Best Integrated BottomSkouphy LED Enclosure9.6/10View on Amazon - 3
Best Dual WindowCreality Falcon 2.09.5/10View on Amazon - 4
Best Vent DesignLONGER Vent Enclosure9.5/10View on Amazon - 5
Enclosure PickSkouphy Creality 2.09.5/10View on Amazon - 6
Laser Engraver 20W Enclosure Laser Cutter 300x300mm LargeView on Amazon - 7
Laser Engraving MachineView on Amazon
Signs, tumblers, leather patches and cut parts all start the same way: a design on screen, a machine humming through material, and smoke curling up into the room. The best laser enclosure for xtool m2 owners is the one that keeps that smoke, odor and noise inside a sealed tent while letting the maker watch the work through a filtered window. This comparison looks at five enclosures that fit most laser engraving machines, and scores each on performance, build, value, safety and warranty using only what each listing publishes.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Cregrant3D Enclosure: 28.3 inch enclosure, integrated bottom, 4500 RPM fan, 5-watt LED, 1 year warranty Check price on Amazon
- Best Integrated Bottom Skouphy LED Enclosure: 28.3 inch enclosure, integrated bottom, 4000 RPM fan, filtered PVC window Check price on Amazon
- Best Dual Window Creality Falcon 2.0: 28.3 inch enclosure, dual window with blue light-blocking PVC, 4000 RPM fan Check price on Amazon
- Best Vent Design LONGER Vent Enclosure: Foldable enclosure with ventilation system, detachable fan, 1 year of parts replacement Check price on Amazon
- Enclosure Pick Skouphy Creality 2.0: 28.3 inch enclosure with eye protection, title-only listing data Check price on Amazon
Machines on the list
SKOUPHY Integrated Bottom Laser Engraver Enclosure
Integrated-bottom laser enclosure at 28.3 x 28.3 x 15.7 inches with LED light and a 4500 RPM fan.
Pros
- Integrated bottom prevents smoke from escaping and collects debris
- 4500 RPM fan with three-layer composite exhaust pipe
- 5-watt LED light strip with blue-light filtering PVC window
- Height allows installing a rotary roller, per the listing
Cons
- No fan speed beyond the stated 4500 RPM for larger machines
- Warranty term is 1 year, not longer
- No dual-window design stated
- Brand field and title name different sellers for this listing
Laser Engraver Integrated Enclosure with LED
A protective tent enclosure featuring an integrated sealed bottom, LED light strip, 4000 RPM exhaust fan and 3-layer pipe.
Pros
- Spacious interior of 28.3 x 28.3 x 15.7 inches (720 x 720 x 400 mm) fits xTool D1, Ortur and Sculpfun engravers
- Integrated sealed bottom prevents smoke escape and collects debris
- Equipped with a 4000 RPM ventilation fan, three-layer composite pipe and LED light strip
- Features a 1-year warranty stated in the spec table
Cons
- Listing title lists 28.3 x 28.3 x 15.7 in while spec table lists 15.7 x 28 x 15.7 in
- Spec table labels part and model number as Laser Engraver rather than enclosure
- No laser safety class certification or interlock mechanism
- Laser engraving machine is not included
LONGER Laser Engraver Enclosure with Vent
Foldable laser enclosure with a vent and a detachable fan, sized 27.5 x 27.5 x 13 inches in its bullets.
Pros
- Ventilation system keeps the engraver cool during use
- Detachable fan design allows easy fan replacement or upgrades
- Foldable design allows space-saving storage and portability
- Transparent design allows monitoring the engraver while in use
Cons
- Size differs between title, bullets and spec table
- No fan speed stated in the listing data
- Transparent design states no blue-light filtering claim
- Shorter height may not suit a rotary setup
Creality Laser Engraver Enclosure 2.0
A universal 28.3 x 28.3 x 15.7 in protective tent with a 4000 RPM ventilation fan and dual blue-light blocking windows.
Pros
- Spacious 28.3 x 28.3 x 15.7 inch (720 x 720 x 400 mm) volume compatible with 95% of laser engravers
- Equipped with a 4000 RPM high-efficiency ventilation fan to extract smoke and odors
- Dual-window design uses blue light-blocking PVC material for process viewing
- Constructed with flame-retardant fabric and high-strength steel pipes
Cons
- Spec table lists an inaccurate item weight of 0.704 ounces
- Offers customer satisfaction support but no concrete warranty term is stated
- No interlock switch or formal laser safety class certification
- Exhaust pipe material and length are not detailed in the listing
Creality Laser Engraver Enclosure 2.0
A 720 x 720 x 400 mm protective tent with steel pipe support, a 4000 RPM exhaust fan, and dual-view observation windows.
Pros
- Generous 28.3 x 28.3 x 15.7 inch (720 x 720 x 400 mm) workspace accommodates common laser frames and rotary rollers
- Includes a 4000 RPM ventilation fan to extract smoke, particles, and odor
- Support structure uses high-strength steel pipes with flame-retardant fabric
- Dual-view window design made from anti-blue light PVC material for visual monitoring
Cons
- No warranty term is stated in the listing
- Spec table lists dimensions as 15.75"D x 28.3"W x 15.7"H, conflicting with the 28.3 x 28.3 inch base stated in the title and bullets
- The anti-blue light PVC window provides no stated optical density rating or wavelength specification
- Item weight is omitted from the listing specification table
Other machines to compare
Laser Engraver 20W Enclosure Laser Cutter 300x300mm LargeCheck price on Amazon
Laser Engraving MachineCheck price on Amazon
Specs compared
| Enclosure | HQ Score | Size | Fan | Window | Warranty |
|---|---|---|---|---|---|
| Cregrant3D Enclosure | 9.7/10 | 28.3 x 28.3 x 15.7 inches | 4500 RPM | PVC, filters blue light | 1 year warranty |
| Skouphy LED Enclosure | 9.6/10 | 28.3 x 28.3 x 15.7 inches | 4000 RPM | PVC, filters blue light | Not stated |
| Creality Falcon 2.0 | 9.5/10 | 28.3 x 28.3 x 15.7 inches | 4000 RPM | Dual window, blue light-blocking PVC | Not stated |
| LONGER Vent Enclosure | 9.5/10 | 27.5 x 27.5 x 13 inches | Ventilation system, speed not stated | Transparent design | 1 year of free parts replacement |
| Skouphy Creality 2.0 | 9.5/10 | 28.3 x 28.3 x 15.7 inches | Not stated | Eye protection stated in title | Not stated |
Specifications are manufacturer rated, as published on each listing and collected 29 October 2026.
How to choose the best laser enclosure for xtool m2
Match the size to the machine and the rotary
Size decides whether the machine and its accessories fit inside with room to work. Four picks here measure 28.3 x 28.3 x 15.7 inches (720 x 720 x 400 mm), and the Cregrant3D listing states the higher size allows installing a rotary roller, which matters for tumbler and curved-piece work. The LONGER measures 27.5 x 27.5 x 13 inches (700 x 700 x 330 mm) in its bullets, a shorter height that may not suit a rotary setup. Measure the machine with any rotary attached before ordering, since the listings give enclosure size but no machine size for the xTool M2 itself. A laser engraver enclosure guide covers enclosed machines more broadly.
Compare the fan and the window
The fan decides how fast smoke and odor leave the tent, and the window decides how safely the work can be watched. The Cregrant3D uses a 4500 RPM high-efficiency ventilation fan with a three-layer composite smoke exhaust pipe, while the Skouphy and the Creality Falcon each use a 4000 RPM high-efficiency ventilation fan with the same three-layer pipe design. The LONGER states an effective ventilation system with a detachable fan design but no fan speed. On windows, the Cregrant3D, Skouphy and Creality listings all state a thickened PVC visual window that filters blue light, and the Creality adds a dual-window design, while the LONGER states a transparent design without a filtering claim.
Check the bottom, the build and the warranty
The bottom design decides whether smoke escapes underneath and where debris collects. The Cregrant3D and Skouphy listings both describe an integrated bottom design that prevents smoke from escaping and collects debris, and both use aluminum mold oxford cloth with iron supports. The Creality uses flame-retardant fabric with high-strength steel pipes, and the LONGER uses a foldable design with a detachable fan for storage and portability. Warranty terms are thin across this group: the Cregrant3D states a 1 year warranty and the LONGER states 1 year of free parts replacement, while the other listings state no warranty term. Readers comparing xTool gear may also want the laser enclosure for xtool p3 guide and the honeycomb bed for xtool m1 guide.
Never leave a running laser unattended, vent smoke outdoors, and wear glasses rated for your laser’s wavelength on any machine without a working enclosure. Never laser PVC or vinyl. A transparent window without a stated filtering rating is not eye protection.
Project Match
- Signs and cut parts: the 28.3 x 28.3 x 15.7 inch enclosures give room for flat work and a rotary roller, per the Cregrant3D listing.
- Tumblers and curved pieces: the Cregrant3D listing states its height allows installing a rotary roller; other listings state no rotary fit.
- Watching the work closely: the Creality dual-window design with blue light-blocking PVC, or the Cregrant3D and Skouphy filtered PVC windows.
- Small spaces and storage: the LONGER foldable design with a detachable fan, at 27.5 x 27.5 x 13 inches in its bullets.
- Materials for each project: Not stated beyond the enclosure fabrics and windows; match the enclosure to the machine, not to the material.
How the scores add up
Each enclosure is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing, and safety scoring uses only stated features such as a blue-light filtering window.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Cregrant3D Enclosure | 9.7 | 32 | 22 | 21 | 8 | 3 |
| LONGER Vent Enclosure | 9.5 | 28 | 20 | 20 | 0 | 3 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
FAQ: lasers and CNC
Will these enclosures fit an xTool M2?
Every listing here states compatibility with most laser engraving machines on the market, and the Cregrant3D listing names xtool d1 and d1 pro among others, but none names the xTool M2 directly. Match the enclosure size to the machine before ordering.
What size are these enclosures?
Four picks measure 28.3 x 28.3 x 15.7 inches (720 x 720 x 400 mm). The LONGER measures 27.5 x 27.5 x 13 inches (700 x 700 x 330 mm) in its bullets, while its spec table lists 24.5 x 24.5 x 13.0 inches.
Do the enclosures include a fan?
The Cregrant3D includes a 4500 RPM ventilation fan, and the Skouphy and Creality Falcon each include a 4000 RPM ventilation fan. The LONGER states a ventilation system with a detachable fan but no fan speed.
Can you watch the engraving inside?
The Cregrant3D, Skouphy and Creality listings state a thickened PVC visual window that filters blue light, and the Creality adds a dual-window design. The LONGER states a transparent design without a filtering claim.
Which enclosures state a warranty?
The Cregrant3D states a 1 year warranty, and the LONGER states 1 year of free parts replacement. The Skouphy, Creality Falcon and title-only Skouphy listings state no warranty term.
Related: best laser engraver enclosure, best laser enclosure for xtool p3, best honeycomb bed for xtool d1 pro and the laser accessories hub.
