Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Heat Press with Slide Out Drawer (2026): 5 Picks for T-Shirts and Transfers

Five slide-out heat presses for t-shirts, DTF and sublimation, from a 15x15 in drawer press to a 16x24 in semi-auto machine, compared by work area and temperature range.

Best Heat Press with Slide Out Drawer (2026): 5 Picks for T-Shirts and Transfers
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Whubefy 15×15 Slide OutBest OverallWhubefy 15×15 Slide Out9.7/10View on Amazon
  2. 2JintianCrafts 16×24Best Large FormatJintianCrafts 16×249.6/10View on Amazon
  3. 3PlanetFlame 15×15Best for T-ShirtsPlanetFlame 15×159.6/10View on Amazon
  4. 4VEVOR 15×15 Slide OutBest Temperature RangeVEVOR 15×15 Slide Out9.6/10View on Amazon

A heat press earns its place when a stack of blank shirts turns into finished orders without burned fingers or crooked prints. The drawer slides out, the shirt goes on flat, the drawer slides back, and the press closes on a design that lands where it should. This guide compares the best heat press with slide out drawer options for t-shirts, DTF transfers and sublimation, using only what each maker states.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall Whubefy 15×15 Slide Out: 1200W with dual heating tubes, a 32-450°F range, a fully slide-out drawer, an alarm and auto shutoff after 30 minutes idle. Check price on Amazon
  • Best Large Format JintianCrafts 16×24: A 16×24 in plate with 2000W, an auto-open platen and a slide-out base for XL designs. Check price on Amazon
  • Best for T-Shirts PlanetFlame 15×15: 1350W, a Teflon plate, a 0-390°F range and a slide-out drawer, with CE certification. Check price on Amazon
  • Best Temperature Range VEVOR 15×15 Slide Out: A 32-480°F range with dual insulation and a pull-out drawer. Check price on Amazon

Machines on the list

Whubefy Heat Press 15x15 Full Slide Out Shirt

Whubefy Heat Press 15x15 Full Slide Out Shirt

Whubefy9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1200W clamshell press with a fully slide-out 15x15 in drawer, dual heating tubes, a 32-450°F range and an alarm with auto shutoff after 30 minutes idle.

Pros

  • Dual heating tubes across a 15x15 in plate
  • Fully slide-out drawer keeps hands away from the hot plate
  • Temperature range of 32-450°F with a 0-999s timer and alarm
  • Auto shutoff after 30 minutes idle and a stated 1 year warranty

Cons

  • 32.19 lb to lift and place
  • Sensor wire must be connected for the timer and beep alerts to work
  • 15x15 in plate sets the limit for one-pass designs
  • No stated maximum material thickness
PlanetFlame 15x15 Heat Press Machine for T-Shirts

PlanetFlame 15x15 Heat Press Machine for T-Shirts

PlanetFlame9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1350W slide-out press with a 15x15 in Teflon plate, a 0-390°F range and a 0-999s timer, with CE certification and a safety fuse.

Pros

  • 1350W with a 0-390°F temperature range
  • Teflon nonstick plate for easy cleaning
  • Fully pull-out tray for garments, puzzles, mouse pads and coasters
  • CE certified with a built-in safety fuse and 365-day warranty

Cons

  • 44.3 lb to lift and place
  • 390°F top temperature is the lowest of the five
  • No stated alarm when the cycle ends
  • No stated maximum material thickness
16x24 Inch Heat Press Machine,Semi-Auto Open

16x24 Inch Heat Press Machine,Semi-Auto Open

JintianCrafts9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2000W semi-auto press with a 16x24 in Teflon-coated plate, an auto-open platen, a slide-out base and an air switch.

Pros

  • 16x24 in plate, the largest work area here
  • 2000W, the highest power here
  • Upper platen opens automatically when the timer ends
  • Pressure knob adjusts for material up to 2.36 in thick

Cons

  • 79.36 lb, the heaviest of the five
  • No warranty term in the listing
  • 392°F top temperature, below the 450°F and 480°F tops here
  • 35.43 in dimensions need a large bench
VEVOR Heat Press Machine 15" x 15" Digital Slide

VEVOR Heat Press Machine 15" x 15" Digital Slide

VEVOR9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15x15 in slide-out press with a 32-480°F range, dual insulation and an alarm when the cycle ends.

Pros

  • 32-480°F temperature range, the widest top here
  • Dual insulation keeps the surface at 50-70°C
  • Pull-out drawer keeps hands away from the heating plate
  • Alarm signals when the set cycle ends

Cons

  • No power figure stated in the listing
  • No warranty term in the listing
  • 15x15 in plate sets the limit for one-pass designs
  • No stated maximum material thickness
BetterSub Heat Press 15x15 inch Digital Heat Press

BetterSub Heat Press 15x15 inch Digital Heat Press

BetterSub9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1000W slide-out press with a 15x15 in plate, a 0-440°F range and solid-state relays.

Pros

  • 0-440°F temperature range with a 0-999s timer
  • Solid-state relays protect circuits in over voltage
  • Slide-out bottom plate reduces accidental contact
  • LCD display shows temperature and time with digital control

Cons

  • 1000W, the lowest power here
  • 15x15 in plate sets the limit for one-pass designs
  • No stated auto shutoff or alarm
  • No stated maximum material thickness

Specs compared

Model HQ Score Power Work area Temperature range Timer Slide-out Warranty
Whubefy 15×15 Slide Out 9.7/10 1200W 15×15 in 32-450°F 0-999s, alarm Fully slide-out drawer 1 year
PlanetFlame 15×15 9.6/10 1350W 15×15 in 0-390°F 0-999s Fully pull-out tray 365 days
JintianCrafts 16×24 9.6/10 2000W 16×24 in 0-392°F 0-999s, auto-open Slide-out lower base Not stated
VEVOR 15×15 Slide Out 9.6/10 Not stated 15×15 in 32-480°F 0-999s, alarm Pull-out drawer Not stated
BetterSub 15×15 9.5/10 1000W 15×15 in 0-440°F 0-999s Slide-out bottom plate Not stated

Specifications are manufacturer rated, as published by each maker and collected 22 November 2026.

Best Heat Press with Slide Out Drawer: What to Check

A slide-out drawer changes how a press feels to use, but the drawer is only one part of the choice. Work area sets the size of each design, the temperature range sets which transfers the press can run, and the weight sets where the press can live. The notes below compare the five picks on those points, using only the figures each maker states.

Match the work area to your designs

Four picks press a 15×15 in area: the Whubefy, the PlanetFlame, the BetterSub and the VEVOR. A design larger than that plate needs more than one press cycle, so measure the largest design first. The JintianCrafts presses a 16×24 in area, which takes larger designs and XL garments in one cycle. Its plate is Teflon-coated, while the PlanetFlame plate is Teflon nonstick, so both release transfers without sticking.

Temperature range and power

The temperature ranges run from 0-390°F on the PlanetFlame to 32-480°F on the VEVOR, with the JintianCrafts at 0-392°F, the BetterSub at 0-440°F and the Whubefy at 32-450°F. Power runs from 1000W on the BetterSub to 2000W on the JintianCrafts, with the Whubefy at 1200W and the PlanetFlame at 1350W. The VEVOR states no power figure, so its heating cannot be compared on watts. The Whubefy adds dual heating tubes, which the maker pairs with faster, even heating.

The drawer is the safety feature

Every pick here slides the lower platen out, so hands stay clear of the hot plate while a garment goes on or comes off. The Whubefy drawer slides fully out, and its press shuts off after 30 minutes idle and sounds an alarm when heating ends. The VEVOR drawer pulls out too, and its dual insulation keeps the surface at 50-70°C even when the press runs above 210°C. The JintianCrafts base slides out and its upper platen opens on its own when the timer ends, while an air switch guards the electrics. The PlanetFlame adds a built-in safety fuse with CE certification, and the BetterSub uses solid-state relays to protect its circuits.

Weight and bench space

The Whubefy weighs 32.19 lb and measures 22.8 x 12.8 x 15.5 in, the lowest stated weight here. The VEVOR weighs 35.27 lb at 24.0 x 15.3 x 13.3 in, and the PlanetFlame weighs 44.3 lb at 26.0 x 15.9 x 11.8 in. The JintianCrafts weighs 79.36 lb and measures 35.43 x 11.81 x 35.43 in, so it needs the largest bench of the five. The BetterSub states no weight, but its dimensions are 27.56 x 18.11 x 13.58 in.

Warranty

Two picks state a warranty term. The PlanetFlame carries 365 days, and the Whubefy states 1 year. The BetterSub, the VEVOR and the JintianCrafts state no warranty term, so a buyer who wants written cover should weigh that before choosing.

Safety

A heat press runs hot enough to burn, so use the drawer for every load and unload, and let the plate cool before moving the machine. The Whubefy shuts off after 30 minutes idle, and the PlanetFlame fuse shuts the press down on high temperatures, but no press here should run while no one is in the room.

Project Match

Each pick lists flat items, so match the project to the plate and the materials each maker names.

  • T-shirts and sublimation: all five picks. DTF: the PlanetFlame, BetterSub, Whubefy and JintianCrafts name DTF; the VEVOR does not.
  • Large designs and XL garments: the JintianCrafts, with its 16×24 in plate.
  • Flat items such as mouse pads and tiles: the PlanetFlame, Whubefy and BetterSub name mouse pads and tiles, the VEVOR names table mats and tiles, and the PlanetFlame adds puzzles and coasters.
  • Hoodies and thick items: the JintianCrafts, whose pressure knob adjusts for material up to 2.36 in thick; the VEVOR also lists hoodies.
  • Caps and curved items: Not stated for any pick here.

How the scores add up

Each machine is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the maker does not publish scores nothing.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Whubefy 15×15 Slide Out 9.7 32 21 21 7 2
PlanetFlame 15×15 9.6 29 20 20 8 2
JintianCrafts 16×24 9.6 33 21 19 8 0
VEVOR 15×15 Slide Out 9.6 29 20 20 8 0
BetterSub 15×15 9.5 27 19 20 7 0

Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.

FAQ: lasers and CNC

What size heat press do I need for t-shirts?

Four picks here press 15×15 in, which covers most shirt designs in one cycle. The JintianCrafts presses 16×24 in for larger designs and XL garments. Measure the largest design before choosing, since a design larger than the plate needs more than one press cycle.

How hot do these heat presses get?

The PlanetFlame reaches 390°F, the JintianCrafts 392°F, the BetterSub 440°F, the Whubefy 450°F and the VEVOR 480°F. The Whubefy also gives its range as 0-232°C and the VEVOR as 0-250°C. Each press holds its set temperature with a digital control and a 0-999s timer.

Do slide-out heat presses need a special bench?

No special bench is stated, but check the weight and size. The Whubefy weighs 32.19 lb, the VEVOR 35.27 lb, the PlanetFlame 44.3 lb and the JintianCrafts 79.36 lb, with the BetterSub stating no weight. The JintianCrafts measures 35.43 x 11.81 x 35.43 in, the largest dimensions here, so it needs the most bench space.

Which of these heat presses have a warranty?

The PlanetFlame states 365 days, and the Whubefy states 1 year. The BetterSub, the VEVOR and the JintianCrafts state no warranty term.

Can I press thick items like hoodies?

The JintianCrafts pressure knob adjusts for material up to 2.36 in thick, from thin tees to thick hoodies, and the VEVOR lists hoodies among its uses. The other three picks have adjustable pressure knobs but state no maximum thickness.

Related: best heat press for shirts and hoodies, best heat press for home use, best heat press machine for small business, what supplies do I need for a heat press machine and heat press temperature for DTF transfers.

More buying guides

Heat Presses and Sublimation ·

Best Sublimation Ink for Epson Et 15000 (2026)

Five sublimation ink refill sets for the Epson ET-15000, from a 2000ml four-color set to a black-only refill, compared by volume and refill style.

Heat Presses and Sublimation ·

Best Heat Press for Shirts and Hoodies (2026)

Heat presses for shirts and hoodies compared by stated platen size, pressure adjustment, heating design, controls and warranty, from a 15 x 15 in…