Best Epoxy Resin Color Pigment (2026): 5 Picks for Resin Art
Five epoxy resin pigment sets from 8 to 48 colors, in mica powder, liquid dye and paste form, compared on color range, amount, mix control and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallLET’S RESIN Paste9.5/10View on Amazon - 2
Most ColorsSigWong Liquid 489.5/10View on Amazon - 3
Best Mica PowderCHANGTIKEJI Mica 249.5/10View on Amazon - 4
Best Opaque PasteBALTIC DAY Paste 249.4/10View on Amazon
A resin pour turns on color: a river table, a jewelry piece or a tumbler blank starts clear, and the pigment decides whether it reads as deep water, stone or stained glass. This guide covers the best epoxy resin color pigment, sets in mica powder, liquid dye and paste, compared on what each listing states: color range, amount, mix control and warranty.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall LET’S RESIN Paste: An 8-color paste set with a stated 2-5% mix range, UV resin guidance and a 12 month warranty. Check price on Amazon
- Most Colors SigWong Liquid 48: 48 translucent liquid colors at 6 ml per bottle, 288 ml in the set, for epoxy, UV and casting resin. Check price on Amazon
- Best Mica Powder CHANGTIKEJI Mica 24: 24 natural mica colors at 10 g per bottle, stated non-toxic, with spoons, a brush and a bottle opener. Check price on Amazon
- Best Opaque Paste BALTIC DAY Paste 24: 24 opaque paste colors at 15 g per jar, stated UV-resistant, for river tables, jewelry and tumblers. Check price on Amazon
Machines on the list

LET'S RESIN 8-Color Resin Pigment Paste
An 8-color concentrated pigment paste set with a stated 2-5% mix range, UV resin guidance and a 12 month warranty.
Pros
- 8 ready-to-use paste colors, from translucent tints to opaque finishes
- Stated mix range of 2-5% of total resin volume
- Fine-tip squeeze bottles for drop-by-drop control
- 12 month warranty stated
Cons
- 8 colors, the smallest range here
- Excess pigment in UV resin may keep the resin from setting, per the maker
- No brush, spoon or mixing tool is stated as included
- No mica or shimmer effect is stated for these pastes

CHANGTIKEJI Mica Powder,24 Colors
A 24-color natural mica powder set at 10 g per bottle, stated non-toxic, with spoons, a brush and a bottle opener.
Pros
- 24 mica colors at 10 g per bottle
- Stated 100% natural mica, mild and non-toxic
- Two spoons, a brush and a bottle opener in the box
- Stated for resin art, soap making, candle making and bath bombs
Cons
- Powder format, so color strength depends on how much is mixed in
- Bottle amounts vary by color density, per the maker
- No liquid or paste form for drop-by-drop control
- No UV resin guidance is stated

Epoxy Resin Color Pigment
A 48-color translucent liquid pigment set at 6 ml per bottle, highly concentrated, for epoxy, UV and casting resin.
Pros
- 48 translucent colors, the widest range here
- 6 ml per bottle, 288 ml in the set
- Highly concentrated: 1-2 drops per mix, per the maker
- Stated for epoxy, UV and casting resin
Cons
- No warranty term is stated
- Translucent only; no opaque finish is stated
- Precipitation is normal after standing; shake before each use
- No brush, spoon or mixing tool is stated as included

24 Color Pigment Paste for Epoxy Resin Set
A 24-color opaque pigment paste set at 15 g per jar, stated UV-resistant, for river tables, jewelry and tumblers.
Pros
- 24 opaque paste colors at 15 g per jar
- Stated UV-resistant with a high-gloss finish
- Thick paste for cells and lacing in ocean wave pours
- Mixes with mica powders and liquid colorants, per the maker
Cons
- No warranty term is stated
- Paste only; no liquid or powder form in this set
- No mix percentage is stated
- No UV resin guidance is stated

Epoxy Resin Pigments - 30 Colors Resin Color
A 30-color translucent liquid dye set in squeeze bottles, highly concentrated, for epoxy resin and UV glue.
Pros
- 30 translucent liquid colors
- Highly concentrated liquid; a small drop goes a long way, per the maker
- Leak-proof squeeze bottles with a fine mouth for drop control
- Stated for epoxy resin and UV glue, for resin art and jewelry
Cons
- No per-bottle amount is stated
- No warranty is stated
- Too much dye may prolong setting time or keep the resin from setting, per the maker
- Precipitation is normal after standing; shake well before use
Specs compared
| Model | HQ Score | Colors | Form | Amount | Works with | Warranty |
|---|---|---|---|---|---|---|
| LET’S RESIN Paste | 9.5/10 | 8 | Paste | 14.27 oz set | Epoxy and UV resin | 12 months |
| CHANGTIKEJI Mica 24 | 9.5/10 | 24 | Mica powder | 10 g per bottle | Epoxy resin | 3 months |
| SigWong Liquid 48 | 9.5/10 | 48 | Liquid dye | 6 ml per bottle | Epoxy, UV and casting resin | None stated |
| BALTIC DAY Paste 24 | 9.4/10 | 24 | Paste | 15 g per jar | Epoxy resin | None stated |
| TQELFSS Liquid 30 | 9.4/10 | 30 | Liquid dye | Not stated | Epoxy and UV glue | None stated |
Specs are what each manufacturer publishes as its rating on the listing, collected 21 November 2026.
Buying guide: best epoxy resin color pigment
Powder, liquid or paste
Three forms appear here. The CHANGTIKEJI set is mica powder, which gives shimmer and mixes into resin, soap and candles. The SigWong and TQELFSS sets are liquid dyes, which give translucent color with drop control. The LET’S RESIN and BALTIC DAY sets are pastes: the LET’S RESIN paste covers translucent tints to opaque finishes, and the BALTIC DAY paste is opaque. Pick the form by the finish you want, since a powder will not give the same look as a paste.
Color range
Color counts run from 8 to 48 across the five sets. The SigWong set holds 48 translucent colors, the widest range here, and the TQELFSS set holds 30. The CHANGTIKEJI and BALTIC DAY sets hold 24 colors each, and the LET’S RESIN set holds 8. A wider range means less mixing to reach a shade; a smaller range means mixing colors yourself to reach the shade you want.
Mixing and setting
Mix guidance differs by set. LET’S RESIN states a mix range of 2-5% of total resin volume, and SigWong states 1-2 drops per mix. The CHANGTIKEJI guidance says to add a little at a time, stir and observe the color change. The TQELFSS guidance warns that too much dye may prolong setting time or keep the resin from setting. Both liquid sets note that pigment settles on standing, so shake before use.
UV resin
Three sets state UV resin or UV glue as a use: the SigWong liquid, the TQELFSS liquid and the LET’S RESIN paste. The LET’S RESIN guidance is the most specific: use a toothpick-sized amount in UV resin, since excess pigment may keep the resin from setting, and double the normal UV time on both sides. The BALTIC DAY paste states UV resistance for the finished color, which is a different claim from use in UV resin.
Warranty and safety statements
Only two listings state a warranty term. LET’S RESIN states 12 months, and CHANGTIKEJI states free return and replacement for 3 months after purchase. The TQELFSS warranty field reads as no warranty, and the SigWong and BALTIC DAY listings state no warranty term. On safety, only the CHANGTIKEJI listing states a safety feature, 100% natural mica, mild and non-toxic, with no harmful substances.
Wear gloves when handling pigment and trimming bottle tips. Shake liquid dyes before use, since pigment settles on standing. For UV resin, use paste sparingly and allow extra time on both sides, since excess pigment may keep the resin from setting.
Project Match
- Jewelry and small pours: the LET’S RESIN paste, with fine-tip bottles for drop-by-drop control, and the SigWong liquid, at 1-2 drops per mix.
- River tables: the LET’S RESIN paste and the BALTIC DAY paste, each stated for river tables.
- Tumblers and coasters: the CHANGTIKEJI mica, stated for tumblers and coasters, and the BALTIC DAY paste, stated for tumblers.
- Soap, candles and bath bombs: the CHANGTIKEJI mica, stated for soap making, candle making and bath bombs.
- UV resin pieces: the SigWong liquid, stated for UV resin, the TQELFSS liquid, stated for UV glue, and the LET’S RESIN paste, with stated UV guidance.
How the scores add up
Each pigment is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. Only the LET’S RESIN listing states a 12 month warranty, and only the CHANGTIKEJI listing states a safety feature, so the other picks score zero on those criteria; the ranking comes from performance, build and value.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| LET’S RESIN Paste | 9.5 | 30 | 21 | 20 | 0 | 2 |
| CHANGTIKEJI Mica 24 | 9.5 | 28 | 20 | 20 | 3 | 1 |
| SigWong Liquid 48 | 9.5 | 30 | 21 | 21 | 0 | 0 |
| BALTIC DAY Paste 24 | 9.4 | 27 | 20 | 20 | 0 | 0 |
| TQELFSS Liquid 30 | 9.4 | 26 | 19 | 20 | 0 | 0 |
HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher.
FAQ: lasers and CNC
Can you use pigment paste in UV resin?
Yes, sparingly. The LET’S RESIN guidance says to use a toothpick-sized amount, since excess pigment may keep the resin from setting, and to double the normal UV time on both sides. The SigWong liquid and the TQELFSS liquid also state UV resin or UV glue as uses.
How much pigment should I add to epoxy resin?
Start with the range the maker states. LET’S RESIN states 2-5% of total resin volume. SigWong states 1-2 drops per mix. The CHANGTIKEJI guidance says to add a little at a time, stir and observe the color change.
How do I use epoxy resin pigment?
Add a little at a time, stir and observe the color change, per the CHANGTIKEJI guidance. Shake liquid dyes before use, since pigment settles on standing. Wear gloves when trimming bottle tips, per the SigWong guidance.
How do I use mica powder pigment in resin?
Mix the powder into the resin a little at a time and stir until the color is even, per the CHANGTIKEJI guidance. The set includes two spoons and a brush for taking powder from the bottle and applying it. The maker states the powder is easy to mix and dissolve.
Mica powder or liquid dye: which should I pick?
Pick mica powder for shimmer: the CHANGTIKEJI set is natural mica in 24 colors. Pick liquid dye for translucent color with drop control: the SigWong set holds 48 colors at 6 ml per bottle. Pick paste for opaque or controlled color: the LET’S RESIN paste covers translucent to opaque, and the BALTIC DAY paste is opaque.
Related: resin pressure pot, resin art kit, resin jewelry making kit, colorant for epoxy resin, dye for epoxy resin, resin for jewelry making, how to use epoxy resin, epoxy resin kits for beginners, resin mixer, non yellowing UV resin, epoxy resin for beginners, resin kit for beginners, and polymer clay vs UV resin.




