Best Blank Aluminum License Plates (2026)
Five aluminum license plate blanks for sublimation and custom design, compared by pack size, thickness and press settings.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallORJ 50 Pack Blanks9.7/10View on Amazon - 2
Best 15 PackNicunom 15 Pack Blanks9.6/10View on Amazon - 3
Best 10 PackXIHEYOMI 10 Pack Blanks9.6/10View on Amazon - 4
Best Lacquered FinishOKBA 15 Pack Blanks9.6/10View on Amazon - 5
Best Small Packnomiou 4 Pack Blanks9.4/10View on Amazon - 6
Nap Tags Aluminum Engraving Name PlatesView on Amazon - 7
Anodized Aluminum Lable Tags 50X20X0.5mm Metal Plates NoView on Amazon - 8
30 Pack Name Plates with Adhesive BackingView on Amazon - 9
Therwen 30 Name PlatesView on Amazon - 10
Yaocom 12 Pcs Engraved Name Plates BlankView on Amazon
A blank plate on the bench is the start of a custom sign, a gift, or a shop sample, and best blank aluminum license plates are the material makers reach for when the design needs metal that holds a sublimated image. This guide compares blanks by pack size, thickness, press settings and mounting holes, using only what each listing publishes.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall ORJ 50 Pack Blanks: 50 pack of aluminum blanks with stated press settings and a 30 days warranty. Check price on Amazon
- Best 15 Pack Nicunom 15 Pack Blanks: 15 blanks with press settings, UV resistance and 4 holes stated. Check price on Amazon
- Best 10 Pack XIHEYOMI 10 Pack Blanks: 10 blanks with full press settings and 4 slots stated. Check price on Amazon
- Best Lacquered Finish OKBA 15 Pack Blanks: 15 lacquered blanks with press settings stated. Check price on Amazon
- Best Small Pack nomiou 4 Pack Blanks: 4 blanks with 4 corner holes for small runs. Check price on Amazon
Machines on the list
50 PCS Sublimation License Plate Blanks 6"X12" x
A 50 pack of white aluminum sublimation license plate blanks, 6 by 12 inches by 0.65mm, with 4 screw slots and a stated 30 days warranty.
Pros
- 50 pack, the largest pack here, for bulk runs
- Stated press settings: 350 to 400 degrees Fahrenheit for 80 to 120 seconds
- 4 prefabricated screw slots for car, home or mailbox mounting
- Aluminum with corrosion-resistant and rust-resistant finish stated
Cons
- 50 pack only, no smaller pack stated
- 4.04 kg pack weight stated
- 30 days warranty term only
- No gloss finish stated
Nicunom 15 Pack Sublimation License Plate Blanks
A 15 pack of white aluminum sublimation license plate blanks, about 12 by 6 inches by 0.45mm, with 4 pre-drilled holes and stated press settings.
Pros
- 15 pack with 4 pre-drilled holes for car, home or mailbox mounting
- Stated press settings: 350 to 400 degrees Fahrenheit for 80 to 120 seconds
- UV and moisture resistance stated, with rust-resistant aluminum
- Thermal transfer, screen printing, UV printing and sticker use stated
Cons
- No warranty term is stated
- No mounting hardware stated
- 0.45mm thickness, thinner than the 0.65mm ORJ blanks
- 15 pack only, no larger bulk pack stated
10 Pack Sublimation License Plate Blanks,Heat
A 10 pack of white aluminum sublimation license plate blanks, about 12 by 6 inches, with 4 screw slots and stated press settings.
Pros
- 10 pack with 4 pre-made screw slots for car, home or mailbox mounting
- Stated press settings: 180 degrees Celsius, about 354 degrees Fahrenheit, for 60 to 120 seconds
- Aluminum with corrosion-resistant and rust-resistant finish stated
- Sublimation, screen printing, UV printing and thermal transfer printing stated
Cons
- No warranty term is stated
- Only white is coated for sublimation, per the listing note
- 10 pack only, no larger pack stated
- No item weight stated
15 PCS Sublimation License Plate Blanks
A 15 pack of white aluminum sublimation license plate blanks, 6 by 12 inches, with 4 screw slots and a lacquered finish.
Pros
- 15 pack with 4 prefabricated screw slots for home or mailbox mounting
- Stated press settings: 350 to 400 degrees Fahrenheit for 80 to 120 seconds
- Lacquered finish stated, with water resistance and rust resistance
- High strength aluminum, not easy to deform, stated
Cons
- No concrete warranty term is stated
- Thickness figures disagree: 0.026 inches against 0.65cm in the bullets
- Spec table lists Bicycle as the compatible vehicle type
- Bullets state home or mailbox mounting, not car mounting
4PCS Blank Metal Automotive License Plate Plates
A 4 pack of white blank metal license plate tags for sublimation and custom design, with 4 corner holes.
Pros
- 4 corner holes for frame mounting with bolts
- Gloss finish stated, for custom designs
- Indoor and outdoor use stated, for most vehicles
- Sublimation, screen printing, UV printing and sticker use stated
Cons
- No size stated
- No thickness stated
- No press temperature or time stated
- No warranty term is stated
Other machines to compare
Nap Tags Aluminum Engraving Name PlatesCheck price on Amazon
Anodized Aluminum Lable Tags 50X20X0.5mm Metal Plates NoCheck price on Amazon
30 Pack Name Plates with Adhesive BackingCheck price on Amazon
Therwen 30 Name PlatesCheck price on Amazon
Yaocom 12 Pcs Engraved Name Plates BlankCheck price on Amazon
Specs compared
| Blank | HQ Score | Pack | Size | Thickness | Warranty |
|---|---|---|---|---|---|
| ORJ 50 Pack Blanks | 9.7/10 | 50 Pack | 6 x 12 in | 0.65mm | 30 days |
| Nicunom 15 Pack Blanks | 9.6/10 | 15 Pack | 12 x 6 in | 0.45mm | Not stated |
| XIHEYOMI 10 Pack Blanks | 9.6/10 | 10 Pack | 12 x 6 in | 0.018 in | Not stated |
| OKBA 15 Pack Blanks | 9.6/10 | 15 Pack | 6 x 12 in | 0.026 in | Not stated |
| nomiou 4 Pack Blanks | 9.4/10 | 4 Pack | Not stated | Not stated | Not stated |
Specifications are manufacturer rated, as published on each listing and collected 24 October 2026. Thickness is the stated plate thickness; pack is the stated pack size.
What the listings tell you, and what they leave out
We read 5 aluminum blank listings for this guide. Only 1 states a concrete warranty term, the ORJ at 30 days. The OKBA warranty field names one month, and the other listings state no warranty term.
Thickness is where the listings disagree most. The OKBA bullets state 0.026 inches and 0.65cm, which do not match, and the nomiou listing states no thickness at all. The nomiou listing also states no size and no press settings, while the other listings state a 12 by 6 inch plate and a press window.
Buying guide: best blank aluminum license plates
Pack size
Packs here run from a 4 pack to a 50 pack. A small pack suits a design or a gift run, while a 50 pack suits a shop that presses the same design in bulk. The 15 pack listings sit in the middle, with enough blanks for a short run and spares for misprints.
Thickness
The listings state 0.018 in, 0.45mm, 0.026 in and 0.65mm. Thicker plate resists bending on a mounted sign, while thinner plate suits light display pieces. The OKBA thickness figures disagree with each other, so treat that listing’s thickness as uncertain.
Press temperature and time
The OKBA, ORJ and Nicunom listings state 350 to 400 degrees Fahrenheit for 80 to 120 seconds, and the XIHEYOMI listing states 180 degrees Celsius, about 354 degrees Fahrenheit, for 60 to 120 seconds. The nomiou listing states no press settings. Peel the protective film before pressing, as every listing that states a press window also states film removal.
Mounting holes
Every blank here states 4 mounting holes or slots: 4 pre-made screw slots on the XIHEYOMI, OKBA and ORJ listings, 4 pre-drilled holes on the Nicunom listing, and 4 corner holes on the nomiou listing. The nomiou listing notes bolts are not included, so plan hardware separately.
Warranty terms
Only the ORJ listing states a concrete warranty term, 30 days. The OKBA warranty field names one month, and the other listings state no warranty term. Weigh pack size, thickness and press settings, since warranty adds little to the choice here.
See the engraving materials hub for more material guides.
A heat press runs at 350 to 400 degrees Fahrenheit, so let plates cool before handling and peel the protective film before pressing, as the listings direct. Vent the work area when pressing coated blanks.
Project Match
- Custom car tags: the ORJ 50 pack and XIHEYOMI 10 pack, each stated for car mounting.
- Gifts: the OKBA 15 pack, stated as gifts for family and friends, and the Nicunom 15 pack, stated for birthdays, weddings and holidays.
- Small runs: the nomiou 4 pack, for a short run of custom designs.
- Home and mailbox decor: the XIHEYOMI, OKBA and Nicunom blanks, all stated for home or mailbox mounting.
- Bulk shop runs: the ORJ 50 pack, the largest pack here.
How the scores add up
Each blank is scored on performance, build, value, safety and warranty. A spec the listing does not publish scores nothing. How we pick explains the weights.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| ORJ 50 Pack Blanks | 9.7 | 32 | 22 | 22 | n/a | 1 |
| Nicunom 15 Pack Blanks | 9.6 | 30 | 21 | 21 | n/a | 0 |
| XIHEYOMI 10 Pack Blanks | 9.6 | 29 | 21 | 20 | n/a | 0 |
| OKBA 15 Pack Blanks | 9.6 | 28 | 20 | 20 | n/a | 0 |
| nomiou 4 Pack Blanks | 9.4 | 26 | 19 | 18 | n/a | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score. Safety counts only for powered gear or where the listing states safety features; where it does not apply, the score is taken over the remaining 90 points.
FAQ: lasers and CNC
What size are blank aluminum license plates?
The listings that state a size state 12 by 6 inches, written as 12 x 6 in or 6 x 12 in. The nomiou listing states no size.
What press temperature and time do the listings state?
The OKBA, ORJ and Nicunom listings state 350 to 400 degrees Fahrenheit for 80 to 120 seconds. The XIHEYOMI listing states 180 degrees Celsius, about 354 degrees Fahrenheit, for 60 to 120 seconds. The nomiou listing states no press settings.
Do the blanks come with mounting holes?
Yes. Every blank here states 4 mounting holes or slots, and the nomiou listing notes bolts are not included.
Which blanks state a warranty?
Only the ORJ listing states a concrete warranty term, 30 days. The OKBA warranty field names one month, and the other listings state no warranty term.
What printing methods do the listings state?
Thermal transfer printing, screen printing and UV printing across the listings, plus sticker use on the Nicunom and nomiou listings.
Related: the engraving materials hub, metal business cards, aluminum vs brass for laser engraving, laser engraver vs sublimation printer, laser engraver vs heat press and laser engraver for beginners.
