Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Blade for Silhouette Cameo (2026): 5 Blades Compared

Five blades for the Silhouette Cameo, Portrait and Curio, compared by auto adjust, angles, pack size and fit.

Best Blade for Silhouette Cameo (2026): 5 Blades Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Cameo 4 Auto BladeBest OverallCameo 4 Auto Blade9.7/10View on Amazon
  2. 2THANMAO CB09 30-BladeBest Value PackTHANMAO CB09 30-Blade9.7/10View on Amazon
  3. 3PRMNIKRE 15-Blade SetBest for Cameo 4PRMNIKRE 15-Blade Set9.6/10View on Amazon
  4. 4Cameo 3 Auto BladeBest for Cameo 3Cameo 3 Auto Blade9.6/10View on Amazon

A vinyl decal peels at the corners, or a cardstock cut tears along the edge, and the blade is usually the cause. This guide covers the best blade for Silhouette Cameo, comparing five blades for the Cameo 4, Cameo 3, Portrait and Curio on auto adjust, angles, pack size and fit.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall Cameo 4 Auto Blade: Auto-adjusts from 0.1 to 1 mm in sintered tungsten alloy for the Cameo 4. Check price on Amazon
  • Best Value Pack THANMAO CB09 30-Blade: 30 carbide blades in 3 angles plus a holder for Cameo 1 to 4 and Graphtec. Check price on Amazon
  • Best for Cameo 4 PRMNIKRE 15-Blade Set: 15 blades in 3 angles with an 11-level holder for Cameo 4, 4 Plus and 4 Pro. Check price on Amazon
  • Best for Cameo 3 Cameo 3 Auto Blade: Tungsten auto blade with software-controlled depth for the Cameo 3. Check price on Amazon

Machines on the list

Silhouette Cameo 4 Auto Blade with Sintered

Silhouette Cameo 4 Auto Blade with Sintered

Silhouette America9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

The Silhouette Cameo 4 auto blade in sintered tungsten alloy, adjusting automatically from 0.1 mm to 1 mm for paper, cardstock, vinyl, HTV and sticker sheets.

Pros

  • Adjusts automatically from 0.1 mm to 1 mm from Silhouette Studio
  • Sintered tungsten alloy resists wear and holds sharpness
  • No manual adjustment or guessing at depth
  • Made for the Cameo 4 with a perfect fit, per the listing

Cons

  • No warranty term is stated
  • For use with Cameo 4 only; no other machine is listed
  • Single blade only; no spare is included
  • No safety listing is stated
CB09 CB09U Blade Holder Base Compatible

CB09 CB09U Blade Holder Base Compatible

THANMAO9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A CB09 blade holder base with 30 carbide cutting blades in 30, 45 and 60 degrees for the Cameo 1, 2, 3 and 4, Portrait, Curio and Graphtec plotters.

Pros

  • 30 blades: 10 each in 30, 45 and 60 degrees
  • Carbide blades with ultra-hardness and long wear
  • Fits Cameo 1, 2, 3 and 4, Portrait, Curio and Graphtec
  • Color-coded caps: yellow 30, red 45, blue 60 degrees

Cons

  • No warranty term is stated
  • Blades do not auto-adjust; depth is set manually
  • No safety listing is stated
  • No blade length levels are stated for the holder
15pack 30 45 60 Degree Cut Blade Plus Blades

15pack 30 45 60 Degree Cut Blade Plus Blades

PRMNIKRE9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15-blade set in 30, 45 and 60 degrees with an 11-level holder in HRA95 hardness alloy for the Portrait and Cameo 4, 4 Plus and 4 Pro.

Pros

  • 15 blades: 5 each in 30, 45 and 60 degrees
  • HRA95 hardness alloy blades
  • 11 levels length setting on the holder
  • High accurate coaxiality bearing, per the listing

Cons

  • No warranty term is stated
  • Blades are set manually; no auto adjust is stated
  • No safety listing is stated
  • Fits only Portrait and Cameo 4, 4 Plus and 4 Pro
Silhouette SILHBLADEAUTO Cameo 3 Auto Blade

Silhouette SILHBLADEAUTO Cameo 3 Auto Blade

Silhouette America9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

The Silhouette Cameo 3 auto blade in tungsten alloy with automatic depth adjustment from Silhouette Studio settings for everyday cutting.

Pros

  • Adjusts automatically from Silhouette Studio settings
  • Tungsten alloy blade
  • Made for the Cameo 3
  • No manual adjustment needed

Cons

  • No warranty term is stated
  • No blade length range is stated
  • Single blade only; no spare is included
  • No safety listing is stated
30 45 60 Degree 15pcs Cutting Plotter Blade

30 45 60 Degree 15pcs Cutting Plotter Blade

Generic9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15-blade set in 30, 45 and 60 degrees with an 11-level holder in HRA95 hardness alloy for the Portrait and Cameo 4, 4 Plus and 4 Pro.

Pros

  • 15 blades: 5 each in 30, 45 and 60 degrees
  • HRA95 hardness alloy blades
  • 11 levels length setting on the holder
  • High accurate coaxiality bearing, per the listing

Cons

  • No warranty term is stated
  • Blades are set manually; no auto adjust is stated
  • No safety listing is stated
  • No brand name is stated on the listing

Other machines to compare

Specs compared

Blade HQ Score Type Angles Pack Auto adjust Fits
Cameo 4 Auto Blade 9.7/10 Auto blade Not stated 1 Yes, 0.1 to 1 mm Cameo 4
THANMAO CB09 30-Blade 9.7/10 Holder + blades 30, 45, 60 deg 30 blades + holder No, manual Cameo 1-4, Portrait, Curio, Graphtec
PRMNIKRE 15-Blade Set 9.6/10 Holder + blades 30, 45, 60 deg 15 blades + holder No, manual, 11 levels Portrait, Cameo 4, Cameo 4 Plus, Cameo 4 Pro
Cameo 3 Auto Blade 9.6/10 Auto blade Not stated 1 Yes, software-controlled Cameo 3
Generic 15-Blade Set 9.6/10 Holder + blades 30, 45, 60 deg 15 blades + holder No, manual, 11 levels Portrait, Cameo 4, Cameo 4 Plus, Cameo 4 Pro

We give each product’s specs as its manufacturer rates them; listings read 4 November 2026.

What the listings tell you

We read 5 blade listings for the Silhouette Cameo. Only 2 stated automatic depth adjustment, both Silhouette auto blades. Only 1 offered 30 blades in the pack, and 2 offered 15 blades with a holder. None stated a warranty term.

Buying guide: choosing a best blade for Silhouette Cameo

Auto adjust or manual

Two blades set their own depth. The Cameo 4 auto blade adjusts from 0.1 mm to 1 mm from Silhouette Studio settings, and the Cameo 3 auto blade adjusts by software configuration. The three holder kits need manual depth setting: the THANMAO listing states its blades do not auto-adjust, and the PRMNIKRE and Generic holders offer 11 levels of length setting.

Blade angles

Angle sets what the blade cuts best. The holder kits state the 30 degree blade suits fabric, thin cardboard and leather, the 45 degree blade suits most general purpose cuts, and the 60 degree blade suits the most intricate and delicate cuts. The two Silhouette auto blades state no angle, so compare them on adjustment, not angles.

Blade material

Material sets how long the edge lasts. Both Silhouette auto blades use sintered tungsten alloy, which the Cameo 4 listing states resists wear and holds sharpness. The THANMAO blades use carbide, and the PRMNIKRE and Generic blades use HRA95 hardness alloy.

Fit

Fit decides whether the blade works at all. The Cameo 4 auto blade is listed for use with Cameo 4 only, and the Cameo 3 auto blade is made for the Cameo 3. The THANMAO kit fits the Cameo 1, 2, 3 and 4, Portrait, Curio and Graphtec plotters, while the PRMNIKRE and Generic kits fit the Portrait and Cameo 4, 4 Plus and 4 Pro.

Use as directed. Blades are sharp, so handle them by the holder and check the fit against the machine before cutting.

Project Match

  • Paper, cardstock, vinyl, HTV and sticker sheets: the Cameo 4 auto blade, per its listing.
  • Fabric, thin cardboard and leather: the 30 degree blades in the THANMAO, PRMNIKRE and Generic kits.
  • Most general purpose cuts: the 45 degree blades in the THANMAO, PRMNIKRE and Generic kits.
  • Intricate and delicate cuts: the 60 degree blades in the THANMAO, PRMNIKRE and Generic kits.
  • Graphtec plotters as well as Cameo machines: the THANMAO kit, which lists Graphtec 6000 and CE 5000-60.

How the scores add up

Each blade is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. None states a safety listing or a warranty term, so every blade here scores zero on those two criteria; the ranking comes from auto adjust, angles, materials and pack size.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Cameo 4 Auto Blade 9.7 32 22 21 n/a 0
THANMAO CB09 30-Blade 9.7 30 21 22 n/a 0
PRMNIKRE 15-Blade Set 9.6 29 21 21 n/a 0
Cameo 3 Auto Blade 9.6 29 21 20 n/a 0
Generic 15-Blade Set 9.6 28 20 21 n/a 0

Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. Safety is scored for powered machines and any listing that states safety features; accessories without either are scored over the remaining 90 points.

FAQ: lasers and CNC

Does the Cameo 4 auto blade fit the Cameo 3?

No. The Cameo 4 auto blade is listed for use with Cameo 4 only. The Cameo 3 has its own auto blade, which adjusts automatically from Silhouette Studio settings.

What is the difference between 30, 45 and 60 degree blades?

The 30 degree blade suits fabric, thin cardboard and leather, the 45 degree blade suits most general purpose cuts, and the 60 degree blade suits the most intricate and delicate cuts. The holder kits here include all three angles.

Do the holder kits adjust the blade depth automatically?

No. The THANMAO listing states its blades do not auto-adjust and must be adjusted manually for depth. The PRMNIKRE and Generic holders offer 11 levels of length setting, which is also a manual setting.

What materials do these blades cut?

The holder kits list card stock, fabric, heat transfer material, transparencies, paper, vellum, adhesive vinyl and magnet paper. The Cameo 4 auto blade lists paper, cardstock, vinyl, HTV and sticker sheets.

Related: the best vinyl for cutting machines guide, best vinyl weeding tool and our craft machines hub. Also see our best light pad for weeding vinyl. Also see our best adhesive vinyl for Cricut. Also see our printable vinyl vs permanent vinyl.

More buying guides