Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Bed Leveling Sensor (2026): 5 Picks for Ender and Klipper Printers

Five auto bed leveling sensors for Ender 3, Ender 5, CR-10 and Klipper printers, compared by precision, brackets, cables and bed materials.

Best Bed Leveling Sensor (2026): 5 Picks for Ender and Klipper Printers
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Geeetech BL-Touch V3.2Best OverallGeeetech BL-Touch V3.29.6/10View on Amazon
  2. 2BIGTREETECH Eddy DuoBest PrecisionBIGTREETECH Eddy Duo9.5/10View on Amazon
  3. 3Creality CR Touch KitBest Creality KitCreality CR Touch Kit9.4/10View on Amazon
  4. 4CR Touch No BracketsBest for Newer Creality ModelsCR Touch No Brackets9.4/10View on Amazon

A first layer that sticks is the difference between a print that finishes and a print that peels up halfway through. A bed leveling sensor measures the height of the bed at several points and lets the printer adjust the nozzle height as it prints, so a bed that is not perfectly flat still gives a level first layer. This guide compares the best bed leveling sensor picks for Creality Ender printers and for Klipper machines, on the details that decide what each one does: stated precision, the brackets and cables in the box, the boards and printers each listing names, and the bed materials each one works with.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall Geeetech BL-Touch V3.2: 4 brackets, an adapter for 8 or 32 bit boards, two cables and a start-up check, with repeatability around 0.003 mm. Check price on Amazon
  • Best Precision BIGTREETECH Eddy Duo: 0.0005 mm precision, thermal compensation and USB or CAN, for Klipper printers on a metal spring steel plate. Check price on Amazon
  • Best Creality Kit Creality CR Touch Kit: A complete kit with 3 brackets and a metal push pin for Ender 3, Ender 3 V2, Ender 3 Pro and CR-10 on 32 bit boards. Check price on Amazon
  • Best for Newer Creality Models CR Touch No Brackets: Positioning accuracy of 0.04 mm or better for Ender 3 NEO, S1 and V3 models, with no brackets in the box. Check price on Amazon

Machines on the list

Geeetech Upgrade BL- Touch V3.2 Auto Bed Leveling

Geeetech Upgrade BL- Touch V3.2 Auto Bed Leveling

Geeetech9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A BL-Touch V3.2 kit with 4 brackets, an adapter for 8 or 32 bit boards, two cables and a start-up check, with repeatability around 0.003 mm.

Pros

  • Repeatability with a standard deviation around 0.003 mm, the finest figure among the touch probes here
  • 4 mounting brackets and an adapter pinboard for 8 or 32 bit motherboards
  • Two extension cables in the box, 18 cm and 100 cm
  • Push pin runs a check on power-on, with an LED that blinks if a problem is found

Cons

  • No warranty term in the listing
  • No weight in the listing
  • The listing spells the sensor name two ways in the bullets, so confirm the version that ships
  • No positioning accuracy figure, only a repeatability standard deviation
BIGTREETECH Eddy Duo V1.0 Auto Bed Leveling Sensor

BIGTREETECH Eddy Duo V1.0 Auto Bed Leveling Sensor

BIQU9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An inductive leveling sensor with 0.0005 mm precision, thermal compensation and USB or CAN, for Klipper printers on a metal spring steel plate.

Pros

  • 0.0005 mm precision, the finest precision figure in this guide
  • Weighs 6 g, with a small size and a dip switch for USB or CAN
  • Thermal compensation and Z-axis return, so temperature swings do not shift leveling
  • Comes with a 2.5 m USB cable and 200 mm CAN wiring for the EBB SB2209 board

Cons

  • No warranty term in the listing
  • Must run on a metal spring steel plate; it will not work on a bed that uses a circular magnet scheme
  • The listing claims it heats up the bed in 20 seconds or less, which is unclear for a sensor, not a heater
  • Needs Klipper and a compatible board such as the Manta M8P, so it is not a drop-in for every printer
Creality CR Touch Auto Bed Leveling Sensor Kit

Creality CR Touch Auto Bed Leveling Sensor Kit

Comgrow9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A Creality CR Touch kit with 3 mounting brackets and a metal push pin for Ender 3, Ender 3 V2, Ender 3 Pro and CR-10 printers on 32 bit boards.

Pros

  • Multi-point detection that records the height of each detection point
  • Metal push pin, rated for reuse more than 100,000 times
  • 3 mounting brackets in the box for different printers
  • Works with PEI, sticker, glass and metal beds

Cons

  • No warranty term in the listing
  • No precision figure in the listing
  • Only compatible with 32 bit V4.2.2 and V4.2.7 mainboards
  • Does not fit the SKR Mini E3 V3 on the Ender 5 Plus
Creality CR Touch Auto Leveling Sensor

Creality CR Touch Auto Leveling Sensor

Creality9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A Creality CR Touch sensor with positioning accuracy of 0.04 mm or better, for Ender 3 NEO, S1 and V3 models, with no brackets in the box.

Pros

  • Positioning accuracy of 0.04 mm or better, stated in the listing
  • Rated for reuse more than 100,000 times
  • Fits a wide range of newer Creality models, from the Ender 3 NEO to the Ender 3 V3 KE
  • Works with PEI, sticker, glass and metal beds

Cons

  • No warranty term in the listing
  • No brackets included, so you need a mount already on the printer
  • No product dimensions in the spec table
  • Installation is described only as a few simple steps, with no bracket or wiring detail
3DMAN 3D Touch Auto Bed Leveling Sensor for Ender

3DMAN 3D Touch Auto Bed Leveling Sensor for Ender

3Dman9.3/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3D Touch sensor with a Hall sensor, RC servo and micro switch, for Ender 3 and Ender 5 printers and almost any control board.

Pros

  • Works with nearly any bed material, including glass, wood and metal
  • Works on almost every 3D printer control board, per the listing
  • Hall sensor with an RC servo and micro switch, the same controls as most auto bed leveling sensors
  • Printing works even when the platform is not flat, since the sensor compensates by adjusting the Z-axis height

Cons

  • No warranty term in the listing
  • No precision figure in the listing
  • No brackets or cables stated in the listing
  • The listing warns that pulling or pushing hard on the push-pin may damage the sensor and make it less accurate

Specs compared

Model HQ Score Precision Compatibility In the box Bed materials Warranty
Geeetech BL-Touch V3.2 9.6/10 Around 0.003 mm repeatability Ender 3 series, Ender 5, Ender 5 Pro, Ender 5s, CR-10; 8 or 32 bit 4 brackets, adapter pinboard, 2 cables (18 cm, 100 cm) Glass, wood, metal Not stated
BIGTREETECH Eddy Duo 9.5/10 0.0005 mm Klipper; Voron 2.4, Stealthburner, Trident, BIQU Hurakan, VzBOT 2.5 m USB cable, 200 mm CAN wiring Metal spring steel plate only Not stated
Creality CR Touch Kit 9.4/10 Not stated Ender 3, Ender 3 V2, Ender 3 Pro, 3 Max, Ender 5 Pro, CR-10; 32 bit 3 brackets, metal push pin PEI, sticker, glass, metal Not stated
CR Touch No Brackets 9.4/10 0.04 mm or better Ender 3 NEO, S1 and V3 models, Ender 5 S1, CR-10 Smart Pro Sensor only, no brackets PEI, sticker, glass, metal Not stated
3Dman 3D Touch 9.3/10 Not stated Ender 3 and Ender 5 series, CR-10 series Sensor only Glass, wood, metal Not stated

Size and performance figures are the brand’s ratings quoted from listings on 11 November 2026. Precision is the figure each listing states; where a listing states no precision figure, the table says so.

What the listings tell you, and what they leave out

Five bed leveling sensor listings were read for this guide, and none states a warranty term. Two state a precision figure: the Eddy Duo at 0.0005 mm and the Geeetech BL-Touch V3.2 with a standard deviation in repeatability around 0.003 mm. The Creality CR Touch without brackets states positioning accuracy of 0.04 mm or better. The other two listings state no precision figure.

Brackets are the other gap. Two listings include brackets in the box: the Creality CR Touch kit with 3 brackets and the Geeetech BL-Touch V3.2 with 4 brackets. The other two listings state no brackets, so check the printer has a mount before buying. The Eddy Duo is the only pick that needs Klipper and a metal spring steel plate, and it will not work on a bed that uses a circular magnet scheme.

Buying guide: choosing the best bed leveling sensor

Touch probe or inductive sensor

Four of the picks are touch probes that press a pin against the bed: the two Creality CR Touch sensors, the Geeetech BL-Touch V3.2 and the 3Dman 3D Touch. A touch probe works with nearly any bed material: glass, wood, metal, PEI and sticker beds, per the listings. The fifth pick, the Eddy Duo, senses the bed without touching it, so it needs a metal spring steel plate.

Precision figures, read carefully

The figures are not measured the same way. The Eddy Duo states 0.0005 mm precision. The Geeetech states a standard deviation in repeatability around 0.003 mm. The Creality CR Touch without brackets states positioning accuracy of 0.04 mm or better. Two listings state no precision figure, so compare those on brackets and bed materials instead.

Brackets, boards and firmware

The Geeetech kit includes 4 brackets and an adapter pinboard for 8 or 32 bit motherboards. The Creality CR Touch kit includes 3 brackets and fits 32 bit V4.2.2 and V4.2.7 mainboards, and the listing says to download firmware from the Creality official website onto the SD card after removing the Z-axis limit switch. The Creality CR Touch sensor without brackets includes no brackets, so the printer needs a mount fitted already. The Eddy Duo connects by USB or CAN and needs Klipper, with a dip switch on the back to choose.

Bed materials

The Creality kits work with PEI, sticker, glass and metal beds. The Geeetech and 3Dman listings name glass, wood and metal beds. The Eddy Duo must run on a metal spring steel plate, and it works with a uniform soft magnetic tile such as a PEI steel plate on soft magnetic backing. If the bed uses a circular magnet scheme, the Eddy Duo will not work.

Project Match

  • Ender 3, Ender 3 V2, Ender 3 Pro or CR-10 on a 32 bit board: Creality CR Touch Kit, with 3 brackets and a metal push pin.
  • Ender 3 NEO, S1 or V3 models with a mount fitted: CR Touch No Brackets, with positioning accuracy of 0.04 mm or better.
  • A printer with an 8 bit board: Geeetech BL-Touch V3.2, with 4 brackets and an adapter for 8 or 32 bit boards.
  • Klipper printers on a metal spring steel plate: BIGTREETECH Eddy Duo, with USB or CAN and thermal compensation.
  • Any bed material, on almost any control board: 3Dman 3D Touch.

How the scores add up

Each sensor is scored on performance, build, value, safety and warranty. A spec the listing does not publish scores nothing, and no listing here states a warranty term.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Geeetech BL-Touch V3.2 9.6 30 21 21 3 0
BIGTREETECH Eddy Duo 9.5 32 21 19 0 0
Creality CR Touch Kit 9.4 28 20 20 0 0
CR Touch No Brackets 9.4 28 19 18 0 0
3Dman 3D Touch 9.3 26 19 18 0 0

We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.

FAQ: lasers and CNC

What is bed leveling?

Bed leveling is measuring the height of the print bed at several points so the printer can adjust the nozzle height as it prints. A bed leveling sensor does that automatically: the Creality CR Touch listing says it performs multi-point detection and records the height of each point, then the printer compensates the Z-axis to stabilize the print.

Does a bed leveling sensor work on any bed material?

Touch probes work on the widest range: the Creality kits list PEI, sticker, glass and metal beds, and the Geeetech and 3Dman listings name glass, wood and metal. The Eddy Duo is different: it must run on a metal spring steel plate and will not work on a bed that uses a circular magnet scheme.

Do I need to remove the Z-axis limit switch?

The Creality CR Touch kit listing says to remove the Z-axis limit switch when installing it, then download the matching firmware from the Creality official website and copy it to the SD card. The other listings do not state this step.

What is the difference between a CR Touch and a BL-Touch?

Both are touch probes: a pin presses against the bed. The Creality CR Touch uses a metal push pin and is made for Creality Ender and CR-10 printers, while the Geeetech BL-Touch V3.2 is controlled by hall effect, ships with 4 brackets and an adapter pinboard for 8 or 32 bit motherboards, and states a standard deviation in repeatability around 0.003 mm.

Related: the 3D printer hub, 3D printer accessories, and the kapton tape vs painter’s tape for 3D printing. Also see our best pei sheet for ender 3 under 20. Also see our best 3D printer lube and grease. Also see our laser cutter vs 3d printer.

More buying guides