Best Aluminum Blanks for Laser Engraving Under $15: 5 Compared

Specs compared

Blank details as published on each listing, collected 21 October 2026.

What the blank listings tell you

Four of the five listings state business card size at 86 x 54 mm or 3.4 x 2.1 in; the Mozeat Lens states tags at 2 x 3/4 in. The stated thicknesses run from 0.009 in on the RXBC2011 to 0.039 in on the Mozeat Lens. The ebamaz is the only one that states a sublimation process with stated figures: 170 to 200 degrees Celsius for 30 to 60 seconds. The ebamaz also states it is not recommended for CO2 devices or machines of 5W or less. Two listings contradict themselves: the weparmeety bullets state 0.21 mm while its spec table states 0.45 mm, and the RXBC2011 spec table states SHEET COUNT 50CARD against its stated 100-count pack.

On thickness, treat the stated figures as the listing’s claim, not a measured value: the weparmeety gives two different stated figures in the same listing, and the RXBC2011 states 0.009 in against the ebamaz’s stated 0.45 mm, a forty-fold spread in stated terms. On count, the stated 100-count packs are the bulk play, but check the spec table’s SHEET COUNT line on the RXBC2011, which disagrees with its own stated 100. On finish, the hansmaker states a clear contrast after engraving, the RXBC2011 states a white or near-silver-white effect, and the weparmeety states a frosted finish that resists fingerprints: three different stated engraved looks, so pick the look that matches the design.

Buying guide: best aluminum blanks for laser engraving under $15

Count per pack

The stated counts are 100, 100, 100, 50 and 25. The hansmaker, RXBC2011 and weparmeety state 100-count packs; the ebamaz states 50 and the Mozeat Lens states 25. For bulk runs, the stated 100-count packs are the value play. For a first try, the stated 25-count tag pack is the smaller commitment.

Thickness and material

The stated thicknesses are 0.21 mm on the hansmaker, 0.009 in on the RXBC2011, 0.21 or 0.45 mm on the weparmeety depending on which stated figure you trust, 0.45 mm on the ebamaz and 0.039 in on the Mozeat Lens. The ebamaz states its 0.45 mm card is not easy to bend; the Mozeat Lens states a smooth, thick surface for stamping and engraving. Match the stated thickness to the use: thin for wallet cards, thicker for tags.

Color and finish

The hansmaker states 10 colors, the weparmeety states blue anodized with a frosted finish, the ebamaz states pearl white with a stated glossy finish, the RXBC2011 states black and the Mozeat Lens states silver. The hansmaker and RXBC2011 state what the engraved mark looks like: a stated clear contrast on the hansmaker and a stated white or near-silver-white effect on the RXBC2011. The weparmeety states its frosted surfaces resist fingerprints.

Engraved effect

The hansmaker states a clear contrast between the engraved area and the original surface, and states dual-side engraving. The RXBC2011 states the engraved effect will be white or close to silver white. The ebamaz suggests the engraving machine produce black words so the engraved effect comes out more obviously. The weparmeety and Mozeat Lens state no engraved effect figure. If the look of the mark matters, the stated effects on the hansmaker, RXBC2011 and ebamaz are the figures to compare.

Machine compatibility

The ebamaz states laser engrave or CNC engraving but states it is not recommended for CO2 devices or machines of 5W or less. The hansmaker and RXBC2011 state laser engraving or CNC etching without a stated power limit. Check the stated machine guidance on the listing before you buy, since the ebamaz is the only one that names a limit.

How the scores add up

The HQ Score weighs performance on stated engraving figures, build on stated thickness and material, value on stated count per pack, safety on stated features, and warranty on a stated term. None of the five states a warranty term or safety features, so those two criteria score zero across the board. Listings were collected 21 October 2026.

Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.

FAQ: lasers and CNC

What size are these blanks?

Four of the five state 86 x 54 mm or 3.4 x 2.1 in, stated as wallet or credit card size. The Mozeat Lens states tags at 2 x 3/4 in.

Which states the most blanks per pack?

The hansmaker, RXBC2011 and weparmeety state 100-count packs. The ebamaz states 50 and the Mozeat Lens states 25.

Do any state dual-side engraving?

The hansmaker states both sides can be engraved. The ebamaz states coating layers on both sides for sublimation printing.

Which listings contradict themselves?

The weparmeety bullets state 0.21 mm while its spec table states 0.45 mm, and its title states blue while the spec table states 10 Colors. The RXBC2011 spec table states SHEET COUNT 50CARD against its stated 100-count pack.

Can I use these on a CO2 laser?

The ebamaz states it is not recommended for CO2 devices. The other four state laser engraving without a stated CO2 limit.

Related: our best aluminum blanks for laser engraving and anodized aluminum vs stainless steel for laser engraving.

Back to all engraving materials reviews.