Baltic Birch vs Poplar Plywood: Which One Should You Buy?
Baltic birch vs poplar plywood for laser cutting: the packs in this guide are 3mm Baltic birch sheets in B/BB and A/A grades for laser work, and no poplar pack is listed here.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Baltic Birch Plywood9.6/10View on Amazon - 2
MUXGOA 20 Pcs Poplar Plywood Sheets9.4/10View on Amazon - 3
Yarlung 10 Pack Baltic Birch Plywood9.5/10View on Amazon - 4
3 mm Baltic Birch Plywood 1/8 x 12 x 20 InchView on Amazon - 5
3 mm Baltic Birch Plywood 1/8 x 12 x 24 InchView on Amazon - 6
Baltic Birch PlywoodView on Amazon - 7
3 mm Baltic Birch Plywood 1/8 x 9 x 12 InchView on Amazon - 8
3 mm Baltic Birch Plywood 1/8 x 12 x 12 InchView on Amazon - 9
6 mm Baltic Birch Plywood 1/4 x 24 x 24 InchView on Amazon
You have a stack of cut parts to make, signs, boxes, ornaments, and the plywood you feed the laser affects how clean the cuts come out and how the finish looks. Baltic birch vs poplar plywood is the choice makers weigh when they buy sheets, and this guide answers it from the packs listed here. Every pack in this guide is Baltic birch; no poplar plywood pack is listed here, so the poplar side has no pick to compare. From the stated facts, the Baltic birch here is the pick for laser cutting and engraving: 3mm sheets in B/BB and A/A grades, made for laser cutting, and the B/BB packs have a smooth face that takes stain.
Other machines to compare
3 mm Baltic Birch Plywood 1/8 x 12 x 20 InchCheck price on Amazon
3 mm Baltic Birch Plywood 1/8 x 12 x 24 InchCheck price on Amazon
Baltic Birch PlywoodCheck price on Amazon
3 mm Baltic Birch Plywood 1/8 x 9 x 12 InchCheck price on Amazon
3 mm Baltic Birch Plywood 1/8 x 12 x 12 InchCheck price on Amazon
6 mm Baltic Birch Plywood 1/4 x 24 x 24 InchCheck price on Amazon
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Baltic birch vs poplar plywood: what the listings show
The comparison has one side in this guide. Every pack listed here is Baltic birch, so the poplar side has no sheet, grade, size or pack count to compare. What the listings state is the Baltic birch side: 3mm sheets in B/BB and A/A grades, made for laser cutting, and the B/BB packs are also made for CNC machines, scroll saws and wood burning. The choice below follows from those stated facts, not from a poplar pack this guide does not list.
From those facts, Baltic birch is the pick for laser cutting and engraving here. The B/BB listings describe a multi-ply sheet with strength and stability, a face that is a single piece with a smooth surface and a light uniform color, and grain that takes stain well. Poplar has no listing in this guide, so this guide makes no poplar pick and states no poplar grade, size or finish.
What Baltic birch brings to a laser project
The Woodpeckers listings describe a sheet that is strong, rigid and stable, with edges that give cleaner joinery and surfaces that hold glue and screws. The face veneer is a single piece with a smooth surface and a light uniform color, while the back veneer typically has one or two small color-matched patches. The grain runs lengthwise and takes stain well, and the thick face veneer gives CNC routers and engraving machines a smoother surface to work on.
For the laser, the Woodpeckers layers are made to move smoothly through laser cutters and scroll saws, and the Craft Closet sheets are made for CO2 and diode laser cutters and CNC machines, with minimal char, reduced residue and no splitting, as the maker states it. Both sides of the Craft Closet sheets come smooth and sanded, and the maker says no sanding is required before use. Patches stay subtle and color matched until stained, but a patch shows clearly once the sheet is stained.
The gear: Baltic birch packs in this guide
Four packs are listed here, all Baltic birch, in 3mm thickness. They differ in sheet size, pack count and grade.
Woodpeckers 12 x 24 inch, box of 50
A B/BB grade pack of 50 sheets, each 3mm thick, with a true size of 11-7/8 by 23-7/8 inches. The face is a single piece with a smooth surface and a light uniform color, and the back veneer typically has one or two small color-matched patches. The maker describes the sheets as strong, rigid and stable, with birch edges for cleaner joinery and surfaces that hold glue and screws.
Woodpeckers 12 x 12 inch, box of 16
The same B/BB grade in a square pack of 16 sheets, each 3mm thick, with a true size of 11-7/8 by 11-7/8 inches. The face is a single piece with a smooth surface and a light uniform color, and the back veneer typically has one or two small color-matched patches. The sheets suit smaller parts and smaller machine beds.
Craft Closet 12 x 19 inch, pack of 10
A B/BB grade pack of 10 hand-selected unfinished sheets, each 3mm thick and 12 by 19 inches, listed as Glowforge ready, with packs of 10, 20, 50 and 100 listed. Both sides come smooth and sanded, and every sheet is inspected by hand for flatness and patches, with the packs offered without patches. The sheets are made for CO2 and diode laser cutters and CNC machines, and the maker states minimal char, reduced residue and no splitting. The maker lists the shape as round in one place and the sheets as 12 by 19 inch rectangles elsewhere; check before ordering.
Frylr 12 x 12 inch, box of 45
A box of 45 sheets in A/A grade, each 3mm thick and 12 by 12 by 1/8 inch, listed for laser engraving and cutting, scroll saw work and wood burning. The title states a nature veneer color and a stronger build than basswood sheets.
How to choose between the packs
Start with sheet size. The packs come in 12 by 12, 12 by 19 and 12 by 24 inches, with true sizes of 11-7/8 inches on the Woodpeckers sheets, so measure the machine bed and the part before you buy. Then look at pack count: 10, 16, 45 and 50 sheets, with the Craft Closet also listed in packs of 20 and 100.
Then look at grade and faces. The Woodpeckers and Craft Closet packs are B/BB grade, and the Frylr pack is A/A grade. A B/BB face is a single piece with a light uniform color, and the back may carry one or two small color-matched patches. The Craft Closet sheets are inspected by hand and offered without patches, with both sides smooth. If the piece will be stained, plan around the patches, since a patch shows clearly once stained.
Cutting and finishing notes
Cut a small trial piece first to check the settings for the sheet you bought, then cut the run. Ventilate the workspace so fumes leave the room, and keep a suitable extinguisher within reach; never leave a running job unattended. For more on machine types, see the diode vs CO2 for cutting plywood guide.
For finishing, the Woodpeckers grain takes stain well, and the uniform grain of the Craft Closet sheets takes paint, stain and engraving. Patches are subtle and color matched until stained, but a patch shows clearly once stained, so keep the patch side in mind.
FAQ: lasers and CNC
Which plywood should I buy for laser cutting?
From the packs listed here, Baltic birch in B/BB grade, 3mm thick, made for laser cutters and CNC machines. No poplar pack is listed here, so this guide makes no poplar pick.
What does B/BB grade mean?
Grade B is a selected one-piece face, generally light and even in color, with occasional small pin knots and brown streaks allowed and generally no patches, voids or mineral streaks. Grade BB is a one-piece face, generally light and even in color, with pin knots, mineral streaking and discoloration allowed and occasional sound tight knots permitted.
What size sheets do the packs come in?
The packs come in 12 by 12, 12 by 19 and 12 by 24 inches, all 3mm thick. The Woodpeckers sheets have a true size of 11-7/8 by 11-7/8 inches on the square pack and 11-7/8 by 23-7/8 inches on the long pack, so measure the machine bed and the part before you buy.
Can I stain Baltic birch plywood?
Yes. The Woodpeckers sheets take stain well, and the Craft Closet sheets take paint, stain and engraving with a uniform grain. Plan around the patches, since a patch shows clearly once the sheet is stained.
Is poplar plywood listed in this guide?
No. Every pack in this guide is Baltic birch, and no poplar grade, size or pack count is stated here. The comparison above follows from the Baltic birch listings only.
Do the sheets need sanding before engraving?
The Craft Closet sheets come smooth and sanded on both sides, and the maker says no sanding is required before use. The Woodpeckers sheets have a thick face veneer that gives engraving machines a smoother surface.
Related: the birch vs poplar for laser cutting guide, the poplar vs birch for laser engraving comparison and the best birch plywood for laser engraving roundup. Also see the 2mm vs 3mm plywood for laser cutting and size of plywood sheets guides.




