Size of Plywood Sheets: Standard Dimensions Chart
Plywood sheet sizes for laser work, from 16 x 12 in Baltic birch to 12 x 18 in basswood, with thickness, pack counts and the listing contradictions to watch for.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
24Pcs 16 x 12 x 1/8 Inch Baltic Birch Plywood9.5/10View on Amazon - 2
12 Pack Basswood Sheets for Crafts 12 x 18 x 1/89.5/10View on Amazon - 3
9 Pack 1/16 X 12 X 17 Inch Thin Birch Plywood9.4/10View on Amazon - 4
12Pcs 16 x 12 x 1/16 Inch Baltic Birch Plywood9.4/10View on Amazon
The size of plywood sheets you need depends on the project and the laser bed: a small sheet suits ornaments and models, while a large sheet suits signs and architectural models, and the thickness is one more figure to check before you buy. This guide lists the sheet sizes, the thickness in inches and millimetres, and the packs they come in, so you can match the sheet to the bed before you buy.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Listings do not always agree with themselves on size. The notes below flag where a title, bullets or spec table disagree, and the cards follow the title where a listing conflicts with itself.

24Pcs 16 x 12 x 1/8 Inch Baltic Birch Plywood
A 24-pack of 16 x 12 x 1/8 in Baltic birch plywood, 3 mm thick, unfinished with an even grain, for laser cutting and engraving, painting and models. It covers the thicker size in the chart.
Pros
- 24 sheets in the pack
- 1/8 in thick, 3 mm stated
- Even birch grain, polished with no warping stated
- Suits laser cutting and engraving, per the listing
Cons
- Warranty field reads 'Basswood Sheet', not a warranty term
- No weight is stated
- No sheet grade is stated

12 Pack Basswood Sheets for Crafts 12 x 18 x 1/8
A 12-piece pack of oversized 12 x 18 inch 3mm basswood sheets suited for larger laser beds and architectural models.
Pros
- 12 x 18 inch (300 x 450 mm) sheet format fits larger laser cutter beds
- Nominal 3mm (1/8 inch) basswood plywood for cutting and engraving
- Listed as flat and smooth without warping, burrs or bending
- Oversized format allows larger single-piece models and signs
Cons
- No warranty term is stated in the listing
- Smallest sheet count in this comparison at 12 sheets

9 Pack 1/16 X 12 X 17 Inch Thin Birch Plywood
A 9-pack of 12 x 17 x 1/16 in thin birch plywood, unfinished, for laser cutting, painting and models. It covers the 12 x 17 in size in the chart.
Pros
- 12 x 17 in sheet size
- 1/16 in thin, easy to cut per the listing
- Unfinished, can be painted, colored and marked
- Close, tight grain stated
Cons
- Bullets call it a 'Basswood sheet' while the title says birch
- Warranty field reads '30' with no unit
- 9 sheets, the smallest pack here
- No grade is stated

12Pcs 16 x 12 x 1/16 Inch Baltic Birch Plywood
A 12-pack of 16 x 12 x 1/16 in Baltic birch plywood, unfinished with an even grain, for laser cutting and engraving, painting and models. It covers the thinner size in the chart.
Pros
- 16 x 12 in sheet, per the title
- 1/16 in thin, easy to cut per the listing
- Even birch grain, polished with no burrs or warping stated
- Suits laser cutting and engraving, per the listing
Cons
- Bullets describe 12 x 12 in sheets, not the 16 x 12 in of the title
- No warranty term is stated
- No weight is stated
Size of Plywood Sheets: The Standard Sizes
The listings here sell sheets in the footprints below, in 1/16 in and 1/8 in thicknesses. The table lists each size with the pack it comes in.
| Sheet | Size | Thickness | Pack |
|---|---|---|---|
| ACXFOND Baltic birch | 16 x 12 in | 1/16 in | 12 sheets |
| ACXFOND Baltic birch | 16 x 12 in | 1/8 in, 3 mm | 24 sheets |
| Cregugua birch | 12 x 17 in | 1/16 in, 0.06 in | 9 sheets |
| VKIZA basswood | 12 x 18 in | 1/8 in, 3 mm | 12 sheets |
Read the size as length by width by thickness, and check the title against the bullets before you buy: the ACXFOND 1/16 in listing states 16 x 12 in in the title and 12 x 12 in in the bullets, and the ACXFOND 1/8 in spec table lists 3.0 x 2.0 x 3.0 in. The cards below follow the title where a listing conflicts with itself.
Thickness: 1/16 in vs 1/8 in
The 1/16 in and 1/8 in sheets cut and engrave, per the listings: the ACXFOND listings describe both thicknesses as easy to cut with utility knives, scroll saws and laser or craft knives, and suitable for cutting and engraving. The listings do not separate uses by thickness: the ACXFOND 1/16 in and 1/8 in listings name the same uses, from wood carving and wood burning to painting and architectural models. The VKIZA basswood sheets (on Amazon) state 300 x 450 x 3 mm.
Pick by size and pack as well as thickness: the 1/16 in sheets come in 12-sheet and 9-sheet packs, while the 1/8 in sheets come in 24-sheet and 12-sheet packs. The ACXFOND listings describe the sheets as polished with no warping stated, and the Cregugua sheets (on Amazon) state a close, tight grain.
How to Measure a Sheet Before You Buy
Check the title, the bullets and the spec table against each other before you buy, since the listings here disagree in places. The ACXFOND 1/16 in listing states 16 x 12 in in the title and 12 x 12 in in the bullets. The ACXFOND 1/8 in spec table lists 3.0 x 2.0 x 3.0 in, which is not a sheet size at all. When the sheet arrives, measure the length, width and thickness against the title.
Watch the material name as well as the size: the Cregugua listing titles its sheets birch plywood and then calls them a ‘Basswood sheet’ in the bullets, while the VKIZA listing sells basswood outright. Buy the material the title names. The birch plywood vs pine plywood guide compares birch with pine for laser cutting, and the basswood vs birch guide compares birch with basswood side by side.
Plywood Sheets for Laser Work
The sheets below cover the sizes in the chart above: pick the size that fits the bed and the thickness that suits the cut, and each card says which listing states each size.
FAQ: lasers and CNC
What is the standard size of a plywood sheet?
The listings here sell 16 x 12 in, 12 x 17 in and 12 x 18 in sheets, in 1/16 in and 1/8 in thicknesses. Match the sheet to the laser bed, and check the title against the bullets, since the listings disagree on size in places.
What thickness of plywood cuts best on a laser?
The listings do not rank one thickness above the other for cutting: the ACXFOND listings describe both the 1/16 in and 1/8 in sheets as easy to cut and suitable for cutting and engraving, and name the same uses for both, from wood carving to architectural models.
Is Baltic birch plywood good for laser engraving?
Yes, per the listings: the ACXFOND sheets describe Baltic birch with an even grain, polished with no warping stated, and suitable for laser cutting and engraving, wood burning and painting. The 1/16 in listing also states no burrs.
What is the difference between birch plywood and basswood sheets?
The listings describe birch for its even grain and basswood for a flat, smooth surface. The VKIZA listing sells basswood in 12 x 18 x 1/8 in sheets, while the ACXFOND listings sell Baltic birch.
How many sheets come in a pack?
The packs here hold 12, 24, 9 and 12 sheets: the ACXFOND 1/16 in pack holds 12, the ACXFOND 1/8 in pack holds 24, the Cregugua pack holds 9, and the VKIZA pack holds 12.
Do these sheets arrive finished or unfinished?
Unfinished, per the listings: the ACXFOND sheets are unfinished Baltic birch, the VKIZA sheets are unfinished basswood, and the Cregugua sheets are unfinished and can be painted, colored and marked.
Related: the engraving materials hub, birch plywood vs pine plywood and diode vs CO2 for cutting plywood. Also see the best basswood for laser cut boxes.




