Baltic Birch vs Mdf for Cnc: Which One Should You Buy?
Baltic birch and MDF both cut on a CNC, but they differ in stated edge, glue and sheet size detail, and the listings below show where each side stands.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Artlicious Baltic Birch Plywood 20 Pack for Laser9.5/10View on Amazon - 2
10 Boards of 12”x 19”, 3mm 1/8th inch MDF9.5/10View on Amazon - 3
Baltic Birch Plywood - 1/8 Inch Thickness9.3/10View on Amazon
A sheet of Baltic birch and a sheet of MDF can look like the same blank on the bench, until the CNC starts cutting and the edges tell a different story. One side is layered wood with a real grain face; the other is pressed fiber with a flat, even face. Baltic birch vs MDF for CNC is the choice between those two characters.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: pick Baltic birch for signs and cut parts: the Artlicious pack states a void-free core and clean edges, and pick MDF for engraving, stencils and model work. The Artlicious Baltic birch pack leads this set on stated detail, with the Craft Closet MDF pack close behind.
Machines on the list

Artlicious Baltic Birch Plywood 20 Pack for Laser
A 20-pack of 12 x 12 in Baltic birch sheets, 3mm thick with a triple-ply, void-free core and waterproof exterior-grade adhesive, for laser cutting and CNC work.
Pros
- 20 sheets of 12 x 12 in Baltic birch in one pack
- Triple-ply sheets with a void-free core for clean edges
- Waterproof, exterior-grade adhesive for lasting durability
- Suits laser cutting, engraving, CNC work and scroll saws
Cons
- No warranty term is stated
- Sheet size is 12 x 12 in, so larger pieces need a bigger sheet
- Only one thickness is listed: 3mm
- No weight is stated

10 Boards of 12”x 19”, 3mm 1/8th inch MDF
A 10-pack of 12 x 19 in MDF sheets, 1/8 in thick, for laser engraving, CNC, router and scroll saw work, with warp-resistant fiberboard and a smooth, fiber-consistent surface.
Pros
- 10 sheets of 12 x 19 in MDF in one pack, with 20, 50 and 100 pack options listed
- Warp-resistant fiberboard that is easy to sand, glue and drill
- Smooth, fiber-consistent density with minimal resin pockets for crisp laser cuts
- Suits model building, sign making, stencils and wood burning
Cons
- The spec table lists thickness as 1/4 while the title and bullets state 1/8 in
- The spec table lists item length as 12 inches while the item dimensions read 12 x 19 x 0.13 inches
- No warranty term is stated
- No core or adhesive detail is stated beyond fiber density

Baltic Birch Plywood - 1/8 Inch Thickness
A 20-pack of 11.8 x 20 in Baltic birch sheets, 0.13 in thick, for laser cutting, CNC cutting and crafts.
Pros
- 20 sheets of 11.8 x 20 in Baltic birch in one pack
- The longest sheet side here at 20 in
- Rectangular sheets for laser cutting, CNC cutting and crafts
- Thickness is stated as 0.13 in
Cons
- The bullets state only the word birch, with no uses or material detail
- The spec table lists item length as 11.8 inches while the title states 11.8 x 20 in
- No warranty term is stated
- No core, glue or finish detail is stated
Other machines to compare
Baltic Birch PlywoodCheck price on Amazon
3 mm Baltic Birch Plywood 1/8 x 12 x 20 InchCheck price on Amazon
3 mm Baltic Birch Plywood 1/8 x 12 x 24 InchCheck price on Amazon
3 mm Baltic Birch Plywood 1/8 x 18 x 24 InchCheck price on Amazon
3 mm Baltic Birch Plywood 1/8 x 6 x 12 InchCheck price on Amazon
3 mm Baltic Birch Plywood 1/8 x 9 x 12 InchCheck price on Amazon
Side by side
| Spec | Artlicious Baltic Birch | Craft Closet MDF | TX Liteart Baltic Birch |
|---|---|---|---|
| HQ Score | 60 | 59 | 50 |
| Side | Baltic birch | MDF | Baltic birch |
| Thickness | 3mm (1/8 in) | 1/8 in (3mm nominal) | 0.13 in |
| Sheet size | 12 x 12 in | 12 x 19 in | 11.8 x 20 in |
| Pack count | 20 | 10 | 20 |
| Core and glue | Void-free core, waterproof exterior-grade adhesive | Fiber-consistent density, minimal resin pockets | Not stated |
| Laser and CNC use | Laser cutting, engraving, CNC, scroll saw | Laser engraving, CNC, router, scroll saw | Laser cutting, CNC cutting, crafts |
| Warranty | Not stated | Not stated | Not stated |
Specs are what each manufacturer publishes as its rating on the listing, collected 20 October 2026.
Baltic birch vs MDF for CNC: thickness and sheet size
All 3 sheets sit in the same thin class: Artlicious Baltic birch is 3mm, about 1/8 in, Craft Closet MDF is 1/8 in, 3mm nominal, and TX liteart Baltic birch is 0.13 in. Sheet size is where they part: 12 x 12 in, 12 x 19 in and 11.8 x 20 in, in packs of 20, 10 and 20, and Craft Closet also lists 20, 50 and 100 pack options.
Cutting and engraving
Both sides cut on a CNC and a laser, according to the listings, and Artlicious and Craft Closet also name engraving. Artlicious names laser cutting, engraving, CNC work, scroll saws and wood burning, and says the sheets give clean burns and consistent detail. Craft Closet claims crisp, low-burn laser cuts from a smooth, fiber-consistent density. TX liteart names laser cutting, CNC cutting and crafts.
Edges, core and glue
The edge is where the Artlicious pack earns its keep in this set. Artlicious states a triple-ply sheet with a void-free core for strength and clean edges, bonded with waterproof, exterior-grade adhesive. Craft Closet states no core or glue detail, only a fiber-consistent density. TX liteart states no core, glue or edge detail at all.
Safety and fumes
Cutting sheet goods makes dust and smoke, so plan ventilation and dust extraction before the job starts. Vent outdoors or use extraction, and never laser PVC or vinyl. Craft Closet marks its sheets laser safe in the spec table, but none of the 3 listings states a laser class or a machine safety feature, so no safety score is given here.
Packs and value
The packs are 20, 10 and 20 sheets, and Craft Closet also lists 20, 50 and 100 pack options. Artlicious gives the fullest listing of the 3. Craft Closet gives a 12 x 19 in sheet with a spec table that clashes on thickness, and TX liteart gives the longest sheet side here at 20 in.
Support and warranty
None of the 3 listings states a warranty term, so no warranty score is given for any pack. Artlicious names Sorillo Brands as the manufacturer and lists model 1002; Craft Closet lists model CC01H85119U10; TX liteart lists part number 001.
Choose Baltic birch if
- You want a layered wood sheet; the Artlicious pack states a void-free core and clean edges.
- You cut signs, ornaments and gifts on a laser or CNC.
- You want the Artlicious pack, with size, thickness, core and adhesive all stated.
Choose MDF if
- You want a flat, even fiber sheet for engraving, stencils and model work.
- You want a 12 x 19 in sheet with 20, 50 and 100 pack options listed.
- You want a sheet listed for paint, wood stain and adhesives.
Stay with the machine while it runs, keep a fire extinguisher nearby, ventilate, and never laser PVC or vinyl. See the scoring method on the method page.
Project Match
- Signs and ornaments: Artlicious Baltic Birch, 12 x 12 in, listed for indoor signs, décor, ornaments and gifts.
- Cut parts and templates: Craft Closet MDF, 12 x 19 in, listed for sign making, stencils and model building.
- Longer sheets: TX Liteart Baltic Birch, 11.8 x 20 in, listed for laser cutting, CNC cutting and crafts.
FAQ: lasers and CNC
Which is better for CNC, Baltic birch or MDF?
It depends on the job. Baltic birch suits signs and cut parts, while MDF suits engraving, stencils and model work. The Artlicious pack leads this set on stated detail.
Can you laser cut MDF?
Yes, with the usual cautions. Craft Closet lists its MDF sheets as ready for laser engraving and cutting, and claims crisp, low-burn cuts. Ventilate well, stay with the machine, and never laser PVC or vinyl.
Which sheet size should I pick for a CNC bed?
The sheets here are 12 x 12 in, 12 x 19 in and 11.8 x 20 in, so a small bed takes the 12 x 12 in pack, while a larger bed can use the other two. Check the listing before you buy, since TX liteart’s spec table lists item length as 11.8 inches.
Can I use these sheets with a Glowforge?
Artlicious lists its Baltic birch sheets as Glowforge compatible and Craft Closet lists its MDF sheets as Glowforge ready; TX liteart states no machine compatibility beyond laser cutting, CNC cutting and crafts.
Do the packs come in bulk sizes?
Craft Closet lists a 10 pack with 20, 50 and 100 pack options, while Artlicious and TX liteart list 20 packs only.
Related: Baltic Birch vs MDF for Laser Cutting, MDF vs Plywood for CNC Router and Baltic Birch vs Birch Plywood for CNC.




