Best Heat Press for Hats Under $120 (2026): 5 Picks Compared
Five hat presses under 120 dollars, compared by platen size, temperature and time control, safety features and warranty, with two listings giving only a title.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallEENOUR Hat Press9.6/10View on Amazon - 2
Best Large PlatenVEVOR TLM-2310-S9.6/10View on Amazon - 3
Best for BeginnersLIKCUT SZ019.5/10View on Amazon - 4
Four PlatensVEVOR 4-Platen Press9.6/10View on Amazon - 5
Two PlatensDelclynee Hat Press9.6/10View on Amazon - 6
Cricut EasyPress Mini Heat PressView on Amazon - 7
Calogy Super Mini Heat Press MachineView on Amazon - 8
Cricut EasyPress Mini Heat Press + Heat Press MatView on Amazon - 9
White PTFE Sheet for Heat PressView on Amazon - 10
YRYM HT PTFE Teflon Sheets for Heat Press- 3 Pack 12"x16"View on Amazon
A custom hat starts with a design pressed onto a curved crown, and the best heat press for hats under 120 is the press that fits that curve without scorching the fabric. We compared hat presses by platen size, temperature control, time control, safety features and warranty, using only what each listing publishes. Some presses arrive with only a title to go on, so their cards stay short and honest about what is not stated.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall EENOUR Hat Press: Two quick-swap platens, LCD control, overheat protection and a 1 Year warranty. Check price on Amazon
- Best Large Platen VEVOR TLM-2310-S: An 8.5 x 4 in plate, 580W dual tubes, 32-449°F range and 30-minute auto shut-off. Check price on Amazon
- Best for Beginners LIKCUT SZ01: Four temperature settings, a curved plate, 10min auto-off and a starter kit. Check price on Amazon
- Four Platens VEVOR 4-Platen Press: Four interchangeable platens and a caps stretcher for hat projects. Check price on Amazon
- Two Platens Delclynee Hat Press: Two platens for structured hats, for HTV iron-on and sublimation projects. Check price on Amazon
Machines on the list
EENOUR Hat Press, Hat Heat Press Machine with 2
A hat press with two quick-swap platens, a cast-aluminum plate, LCD control and a cap stretcher, for caps and small items.
Pros
- Two quick-swap platens: 3.1"x5.9" and 3.7"x7"
- Cast-aluminum plate for even heat across the surface
- Overheat protection built in
- 1 Year warranty stated
Cons
- No temperature range is stated
- No time range is stated
- No auto-off time is stated
- 6.0 pounds to move and store
VEVOR Hat Heat Press Machine
A hat press with an 8.5 x 4 in plate, dual heating tubes and 580W power, for hats, headbands and tote bags.
Pros
- 8.5 x 4 in heating plate
- 580W with dual heating tubes and a PTFE-coated plate
- Temperature range 32-449°F and time range 1-999s with countdown alerts
- 30-minute auto shut-off with buzzer alerts
Cons
- No warranty term is stated
- 14.99 pounds to move and store
- No interchangeable platens stated
- No stretcher dimensions are stated
VEVOR Hat Heat Press Machine
Suits a small business or batch producer who wants four platens and a wide temperature range for hats and other small items.
Pros
- 580W dual heating tubes for faster warm-up
- Four platens: 5.9 x 3, 6.6 x 2.7, 6.6 x 3.9 and 7.9 x 3.5 in
- 32-449°F range with 1-999s countdown alerts
- Cap stretcher, platen covers, gas spring and four suction feet
Cons
- No warranty term is stated
- No plate material stated beyond the PTFE coating
- No pressure figure stated
- No safety certification stated
Hat Heat Press Machine for Caps with 2pcs
Suits a cap maker who wants a wide temperature range and a lifetime element warranty for structured and low-profile caps.
Pros
- 110V/550W power with a 32-455°F range and 0-999s timer
- Curved 6.7 x 3.8 in upper plate with 2 interchangeable lower platens
- Stay-put cap stretcher frees both hands for alignment
- Anti-scorching molded silicone platen and 360-degree printing clearance
Cons
- No safety certification stated
- The listing gives no weight figure
- Curved plate only; no flat platen stated for non-cap items
- The listing gives no temperature table for materials
LIKCUT Hat Press SZ01, Lightweight Hat Press Heat
A lightweight hat press with four temperature settings and a curved plate, for beginners pressing vinyl or sublimation designs onto hats.
Pros
- Four temperature settings from 266°F to 374°F
- Curved 3.15 x 5.5-inch plate for hats
- 10min auto-off with memory function
- Includes heat-resistant base and curved hat molds
Cons
- Temperature overshoots 15°C above each preset before settling
- Spec table dimensions of 1.12 x 0.67 x 0.55 inches do not match a press
- Only four temperature settings, no free temperature entry
- No platen swap stated
Other machines to compare
Cricut EasyPress Mini Heat PressCheck price on Amazon
Calogy Super Mini Heat Press MachineCheck price on Amazon
Cricut EasyPress Mini Heat Press + Heat Press MatCheck price on Amazon
White PTFE Sheet for Heat PressCheck price on Amazon
YRYM HT PTFE Teflon Sheets for Heat Press- 3 Pack 12"x16"Check price on Amazon
Specs compared
| Press | HQ Score | Platen | Temperature | Timer | Warranty |
|---|---|---|---|---|---|
| EENOUR Hat Press | 9.6/10 | 3.1″x5.9″ and 3.7″x7″ | Not stated | Not stated | 1 Year |
| VEVOR TLM-2310-S | 9.6/10 | 8.5 x 4 in | 32-449°F | 1-999s | Not stated |
| LIKCUT SZ01 | 9.5/10 | 3.15 x 5.5 in | 266°F to 374°F | 3s press | 1 year |
| VEVOR 4-Platen Press | 9.6/10 | 4 platens | Not stated | Not stated | Not stated |
| Delclynee Hat Press | 9.6/10 | 6.7″x3.8″ and 6.7″x2.5″ | Not stated | Not stated | Not stated |
Specifications are manufacturer rated, as published on each listing and collected 3 November 2026.
What the listings tell you
We read five listings for this guide. Two listings give only a title, with no bullets or spec table, so their cards state only what the title gives. Two listings state a warranty term of 1 year, and the VEVOR full press states no warranty term. Temperature ranges are stated on two listings and not stated on the others, so check the range before buying if a specific setting matters.
How to choose the best heat press for hats under 120
Platen size and shape
A curved plate follows the crown of a cap, and a second platen covers a different cap size. The EENOUR gives two platens at 3.1″x5.9″ and 3.7″x7″, the VEVOR full press gives an 8.5 x 4 in plate, the LIKCUT gives a curved 3.15 x 5.5-inch plate, and the Delclynee gives two platens at 6.7″x3.8″ and 6.7″x2.5″. The VEVOR 4-platen press states four platens but no dimensions.
Temperature and time control
The VEVOR full press states a temperature range of 32-449°F and a time range of 1-999s with countdown alerts, the widest control here. The LIKCUT gives four temperature settings from 266°F to 374°F with a 3s press, and its listing warns of a 15°C overshoot above each preset before settling, so wait until it has fully stabilized. The EENOUR states precise time and temperature control but gives no range.
Safety and auto-off
The EENOUR lists overheat protection, the LIKCUT switches off after 10min, and the VEVOR full press has a 30-minute auto shut-off with buzzer alerts. The two title-only listings state no safety feature, so treat their safety as not stated.
What comes in the box
The LIKCUT kit includes the press, a heat-resistant base and curved hat molds. The other listings do not state a full box list, so check the listing before buying.
Platens run hot. Keep hands clear of the plate, let the press cool before changing platens, and do not leave a press running unattended.
Project Match
- Caps with HTV or sublimation designs: the EENOUR, the VEVOR full press, the LIKCUT, the VEVOR 4-platen press and the Delclynee all list HTV or sublimation use on hats.
- Small items beyond caps: the EENOUR lists small bags, headbands and socks, and the VEVOR full press lists headbands, tote bags and masks.
- Structured hats: the Delclynee is listed for structured hats with two stated platen sizes.
- A starter kit for beginners: the LIKCUT includes a heat-resistant base and curved hat molds with a single-button press.
How the scores add up
Each press is scored on performance, build, value, safety and warranty. For hat presses, safety points come from named features such as overheat protection and auto-off. Two of the presses state a warranty term.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| EENOUR Hat Press | 9.6 | 29 | 21 | 20 | 7 | 3 |
| VEVOR TLM-2310-S | 9.6 | 32 | 22 | 21 | 8 | 0 |
| LIKCUT SZ01 | 9.5 | 27 | 19 | 20 | 7 | 3 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
FAQ: lasers and CNC
What platen size fits a cap?
It depends on the cap. The EENOUR gives two platens at 3.1″x5.9″ and 3.7″x7″, the VEVOR full press gives an 8.5 x 4 in plate, the LIKCUT gives a curved 3.15 x 5.5-inch plate, and the Delclynee gives two platens at 6.7″x3.8″ and 6.7″x2.5″.
Do these presses state a temperature range?
Two do. The VEVOR full press states 32-449°F and the LIKCUT states four settings from 266°F to 374°F. The EENOUR states precise control with no range, and the two title-only listings state no range.
Which presses switch off by themselves?
The LIKCUT switches off after 10min and the VEVOR full press has a 30-minute auto shut-off. The EENOUR lists overheat protection instead of an auto-off time.
What warranty terms are stated?
The EENOUR states 1 Year and the LIKCUT states 1 year. The other listings state no warranty term.
Related: best heat press for hats, best heat press for canvas, heat press vs iron and the heat presses and sublimation hub.
