Small Parts Drawer Organizer for Crafts and Workshops
How a small parts drawer organizer works: sort by part type, match drawer count and size, use dividers and labels, and stack or wall-mount for daily work.

On this page
You are mid-project, the workbench is covered in screws, spare bits, blanks and loose hardware, and the part you need is buried in a mixed tray. A small parts drawer organizer fixes that by giving small parts a drawer to live in, so you can see what you have, reach it fast and put it back in the same place after each job. The steps below walk through how to sort, size and set up drawers for a craft room or workshop.
As an Amazon Associate I earn from qualifying purchases. LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Drawer counts and sizes in this guide are maker figures for reference cabinets. Measure your largest part before you choose, because drawer names do not tell you whether a long screw, a blank or a tool bit will fit.
Step 1: Sort by part type before you buy anything
Start with the parts, not the cabinet. Empty the trays, jars and loose boxes onto the bench and group what you find by job: fasteners, cutting and engraving consumables, electrical bits, craft findings and spares you reach for during finishing. Keep each group in its own pile while you sort, and throw out bent, rusted or mystery pieces you cannot name. A pile you cannot name will not earn a drawer.
Sort inside each group by size and by how often you reach for it. Parts you use on almost every project belong where your hand lands first, at bench height or in the top rows. Slow spares can live lower or farther back. This order matters more than the cabinet brand, because a drawer you open often should never sit behind a drawer you open rarely.
Step 2: Match drawer count and drawer size to your parts
Drawer count sets how fine your sorting can go. Reference cabinets in this class run from the Akro-Mils 16-Drawer cabinet at 10.5 inches wide by 6.5 inches deep by 8.5 inches high, through the CRAFTSMAN 30 small drawer modular system, to the Akro-Mils 64-Drawer cabinet at 20 inches wide by 6 inches deep by 16 inches high. More drawers help when you hold many small sizes of the same part, such as screws in several lengths. Fewer, larger drawers help when parts are bulky or when you store small tools beside the parts they fit.
Drawer size decides what fits. The IRIS USA 64-Drawer cabinet lists 64 small drawers at 6.87 inches long by 2.12 inches wide by 1.62 inches high for tiny parts and accessories. The IRIS USA 44-Drawer cabinet mixes large drawers at 6.87 inches long by 4.31 inches wide by 2.12 inches high with small drawers at 6.87 inches long by 2.12 inches wide by 1.62 inches high. Mixed sizes suit mixed benches: small drawers for screws, beads and electronics components, large drawers for bigger hardware and craft supplies. Measure your longest part against the drawer length before you commit to a layout.
Step 3: Use dividers and labels so drawers stay sorted
Dividers turn one drawer into several homes. Akro-Mils cabinets include drawer dividers molded into the back of the cabinet, and the Akro-Mils 64-Drawer cabinet lists 8 drawer dividers included. The SSRTK cabinet lists dividers in every drawer plus extras, with 54 label stickers included. Dividers help most where parts look alike: washers beside screws, or similar findings in different finishes. Put the divider in before you fill the drawer, not after parts have mixed.
Labels finish the job. Write the part name and size on the label, not just the family name, so a drawer reads as a specific screw or a specific blank rather than as hardware in general. Finger-grip drawer pulls and rear stop tabs, listed on Akro-Mils cabinets, help here too: the pull gives quick access and the stop tab keeps contents from spilling when a drawer opens fast. If labels are your weak point, our label maker for storage bins guide covers label tools for bins and shelves.
Step 4: Stack, wall-mount or keep the cabinet on the bench
Placement decides whether the organizer stays in use. Akro-Mils cabinets stack together or wall mount with keyhole slots molded into the back of the cabinet. IRIS USA cabinets stack with built-in grooves or wall mount to free bench space. The CRAFTSMAN 30 small drawer system stacks to form a modular storage system, which suits a bench that grows one cabinet at a time. The SSRTK cabinet lists built-in stacking grooves, keyhole slots and 6 screws included for wall mounting.
Wall mounting suits a fixed bench where the same parts come out every day. Stacking suits a bench that changes, because you can move a cabinet to the project instead of walking back to the wall. Bench placement suits the parts you reach for most often, since the cabinet sits at hand height. For wider room layouts, see our craft room storage guide and the small business gear hub.
Step 5: Set up a sorting routine for project work
Give each active project a landing spot. When a job ends, parts go back to their drawers before the next job starts, and new parts get a drawer and a label on the day they arrive. Keep a small tray or shallow box on the bench as a return tray for parts that come off a project mid-job, then empty the tray into drawers at the end of the session. The tray keeps loose parts off the work surface without turning sorting into a separate chore.
Review the layout when a drawer overflows or stays empty. An overflowing drawer needs a divider, a larger drawer or a second home nearby. An empty drawer can take the next new part family. For workshop layout ideas beyond drawers, see our tool box organizer ideas page.
Common mistakes to avoid
- Buying the largest cabinet before you know how many part families you hold.
- Sorting by container instead of by part, so mixed trays move into mixed drawers.
- Skipping labels because you will remember, then opening drawers to check.
- Putting daily parts in the lowest or farthest drawers.
- Mounting a cabinet where drawers cannot open fully.
Small parts drawer organizer: the short version
- Sort parts by job, then by size and by how often you reach for them.
- Match drawer count and drawer size to the longest and bulkiest parts you hold.
- Add dividers where parts look alike, and label every drawer with name and size.
- Stack, wall-mount or bench-place the cabinet where drawers open fully.
- Return parts to their drawers at the end of each job.
Everything after that is upkeep: relabel when a drawer changes job, and split a drawer when it starts to overflow.
FAQ: lasers and CNC
How many drawers does a small parts drawer organizer need?
It depends on how many part families and sizes you hold. Reference cabinets here run from the Akro-Mils 16-Drawer cabinet to the Akro-Mils 64-Drawer and IRIS USA 64-Drawer cabinets, with the CRAFTSMAN system at 30 small drawers. Count your sorted piles first, then pick a count that covers them.
What fits in small organizer drawers?
Small drawers suit screws, nails, beads, electronics components and other tiny parts. The IRIS USA 64-Drawer cabinet lists small drawers at 6.87 inches long by 2.12 inches wide by 1.62 inches high. Measure your longest part against the drawer length of the cabinet you choose before you buy.
Can a small parts cabinet go on a wall?
Yes, where the maker lists wall mounting. Akro-Mils cabinets list keyhole slots molded into the back of the cabinet, IRIS USA cabinets list wall-mountable designs, and the SSRTK cabinet lists keyhole slots with 6 screws included. Check that drawers can open fully in the spot you choose.
Do dividers and labels come included?
Some cabinets include them. Akro-Mils cabinets list drawer dividers included and molded into the back of the cabinet. The SSRTK cabinet lists dividers in every drawer plus extras, with 54 label stickers included. Read the maker figures for the cabinet you choose before you order.
Stackable or wall-mounted: which suits a workshop?
Stacking suits benches that change, because cabinets move with the project. Wall mounting suits fixed benches, because it frees bench space and keeps daily parts in one place. The CRAFTSMAN 30 small drawer system stacks into a modular system, while Akro-Mils and IRIS USA cabinets list both stacking and wall mounting.
Related: the small business gear hub, best craft room storage and tool box organizer ideas. Also see our best label maker for storage bins.




