Polymaker Petg vs Elegoo Petg: Which One Should You Buy?
Polymaker PETG and ELEGOO PETG compared on stated print speed, diameter accuracy, pack size and drying, using the listings as examples.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Polymaker PETG Filament 1.75mm, 1KG, Red9.7/10View on Amazon - 2
ELEGOO PETG 3D Printer Filament 1.75mm White 4KG9.6/10View on Amazon - 3
ELEGOO PETG 3D Printer Filament 1.75mm Green 1KG9.6/10View on Amazon
A maker with a shelf of unfinished prints knows the feeling: a bracket that snaps, a holder that warps, a part that needs to hold up in daily use. PETG is the filament many makers reach for when PLA is not tough enough. The ELEGOO listing describes PETG as combining the best properties of PLA and ABS. This comparison puts polymaker petg vs elegoo petg side by side, using the listings in this article to show where the lines differ.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: Choose Polymaker PETG if print speed matters: the Polymaker example is rated up to 500 mm/s with a high-flow nozzle and a metal hotend. Choose ELEGOO PETG if stated diameter accuracy and pack size matter more: each ELEGOO example states +/- 0.02 mm diameter accuracy, and the white example comes as 4 x 1 kg spools.
Machines on the list

Polymaker PETG Filament 1.75mm, 1KG, Red
A 1.75 mm PETG filament in red on a 1 kg spool, rated up to 500 mm/s with a high-flow nozzle and a metal hotend, neatly wound for smooth feeding with reduced stringing and strong layer adhesion.
Pros
- Rated up to 500 mm/s with a high-flow nozzle and a metal hotend
- Neatly wound with smooth feeding and reduced stringing
- Strong layer adhesion stated on the listing
- High-speed PETG aimed at everyday models to large projects
Cons
- No diameter accuracy figure is stated on the listing
- No printer compatibility is stated on the listing
- No drying or packing details are stated on the listing
- 500 mm/s needs a high-flow nozzle and a metal hotend, per the listing

ELEGOO PETG 3D Printer Filament 1.75mm White 4KG
A white PETG filament in 1.75 mm, sold as 4 x 1 kg spools with +/- 0.02 mm diameter accuracy, neatly wound, dried before packing and vacuum sealed, for most FDM printers.
Pros
- 4 x 1 kg spools in this listing
- Diameter accuracy of +/- 0.02 mm stated on the listing
- Dried before packing and vacuum sealed against moisture and dust
- Fits most 1.75 mm FDM printers, per the listing
Cons
- No print speed is stated on the listing
- White only in this listing; no other color is stated
- Use as soon as possible after unpacking, per the listing
- No warranty term is stated on the listing

ELEGOO PETG 3D Printer Filament 1.75mm Green 1KG
A green PETG filament in 1.75 mm on a 1 kg spool, with +/- 0.02 mm diameter accuracy, neatly wound, dried before packing and vacuum sealed, for most FDM printers.
Pros
- Diameter accuracy of +/- 0.02 mm stated on the listing
- Dried before packing and vacuum sealed against moisture and dust
- Fits most 1.75 mm FDM printers, per the listing
- Tough and durable with high impact resistance, per the listing
Cons
- No print speed is stated on the listing
- Green only in this listing; no other color is stated
- Use as soon as possible after unpacking, per the listing
- No warranty term is stated on the listing
Other machines to compare
ELEGOO PETG 3D Printer Filament 1.75mm Beige 1KGCheck price on Amazon
ELEGOO Rapid PETG 3D Printer Filament 1.75mm White 4 PackCheck price on Amazon
ELEGOO Rapid PETG 3D Filament Bundle 1.75mmCheck price on Amazon
Polymaker PETG Filament 1.75mmCheck price on Amazon
Polymaker Fiberon PETG-ESD 3D Printer FilamentCheck price on Amazon
Polymaker PETG Filament Transparent 1.75mmCheck price on Amazon
Polymaker petg vs elegoo petg side by side
| Spec | Polymaker PETG Red 1KG | ELEGOO PETG White 4KG | ELEGOO PETG Green 1KG |
|---|---|---|---|
| HQ Score | 61 | 60 | 58 |
| Filament | PETG, 1.75 mm | PETG, 1.75 mm | PETG, 1.75 mm |
| Spool size | 1 kg (2.2 lb) | 4 x 1 kg spools (2.2 lb each) | 1 kg (2.2 lb) |
| Print speed | Up to 500 mm/s (high-flow nozzle and metal hotend) | Not stated | Not stated |
| Diameter accuracy | Not stated | +/- 0.02 mm | +/- 0.02 mm |
| Winding | Neatly wound | Neatly wound, full mechanical winding and manual inspection | Neatly wound, full mechanical winding and manual inspection |
| Drying and packing | Not stated | Dried before packing, vacuum sealed | Dried before packing, vacuum sealed |
| Compatibility | Not stated | Most 1.75 mm FDM printers | Most 1.75 mm FDM printers |
| Color | Red | White | Green |
Specs are what each manufacturer publishes as its rating on the listing, collected 5 November 2026.
Print speed
Only the Polymaker listing states a print speed: up to 500 mm/s, with a high-flow nozzle and a metal hotend. The listing ties that speed to enhanced fluidity and smooth flow. The ELEGOO listings state no print speed, so speed cannot be compared across the sides. What the listings show is that Polymaker publishes a speed figure and ELEGOO does not.
Diameter accuracy and winding
Diameter accuracy is where the ELEGOO listings are specific: each states +/- 0.02 mm, with full mechanical winding and strict manual inspection to keep feeding smooth and consistent. The Polymaker listing states no diameter accuracy figure. On winding, all listings describe neatly wound filament, and ELEGOO adds that neat winding reduces tangles and snap issues.
Strength and layer adhesion
Each listing claims strong layer adhesion in its own words. ELEGOO describes PETG as combining the best properties of PLA and ABS, with excellent durability and high impact resistance, minimal warping and shrinkage, and superior layer adhesion, aimed at mechanical parts, holders, clamps and 3D printer parts. Polymaker claims strong layer adhesion with reduced stringing and smooth feeding. Neither listing gives a measured strength figure, so the listings do not support a ranked strength comparison.
Pack size and colors
The listings come in different pack sizes. The Polymaker example is a 1 kg spool in red. The ELEGOO green example is a 1 kg spool in green. The ELEGOO white example is 4 x 1 kg spools, each 2.2 lb, in white. Color and pack size are per-listing facts, and no other colors are stated on these listings.
Drying and storage
Only the ELEGOO listings talk about drying. Each states the filament is completely dried before packing and vacuum sealed against moisture and dust, with no clogging and bubbling, and says to use it as soon as possible after unpacking and to dry it completely before using again. The Polymaker listing states nothing about drying or packing. See our filament dryer guide for PETG for dryer options.
Choose the Polymaker PETG Red 1KG if
- You want a stated print speed, up to 500 mm/s with a high-flow nozzle and a metal hotend.
- You print everyday models to large projects and want smooth feeding with reduced stringing.
- A 1 kg spool in red fits the job.
Choose the ELEGOO PETG White 4KG if
- You want 4 x 1 kg spools in white.
- Stated +/- 0.02 mm diameter accuracy matters for consistent feeding.
- You want filament that arrives dried and vacuum sealed.
Choose the ELEGOO PETG Green 1KG if
- You want a 1 kg spool in green with the same stated +/- 0.02 mm accuracy as the white listing.
- Stated durability and high impact resistance matter for mechanical parts, holders and clamps.
- You want filament that arrives dried and vacuum sealed.
Project Match
- Mechanical parts, holders and clamps: the ELEGOO examples, which name those uses.
- Everyday models to large projects: the Polymaker example, rated up to 500 mm/s with a high-flow nozzle and a metal hotend.
- A multi-spool supply in white: the ELEGOO white example, with 4 x 1 kg spools.
- Small jobs in red or green: the Polymaker red example or the ELEGOO green example, each a 1 kg spool.
FAQ: lasers and CNC
Is Polymaker PETG faster than ELEGOO PETG?
The listings do not settle that comparison. Only the Polymaker listing states a speed, up to 500 mm/s with a high-flow nozzle and a metal hotend. The ELEGOO listings state no speed.
Which PETG has tighter diameter accuracy?
Only the ELEGOO listings state a figure: +/- 0.02 mm on each ELEGOO example. The Polymaker listing states no diameter accuracy, so the listings cannot rank the sides on accuracy.
Does ELEGOO PETG fit most FDM printers?
Yes, per the listing: universal compatibility with most 1.75 mm FDM printers, naming the Neptune series, Ender series, Adventurer series and Kobra series. The Polymaker listing states no printer compatibility.
How should ELEGOO PETG be handled after opening?
Use it as soon as possible after unpacking, and dry it completely before using again, per the listing. It arrives completely dried before packing and vacuum sealed against moisture and dust.
What pack sizes do these PETG listings come in?
The Polymaker example is a 1 kg spool. The ELEGOO green example is a 1 kg spool. The ELEGOO white example is 4 x 1 kg spools, each 2.2 lb.
Related: Polymaker PETG vs SUNLU PETG, ELEGOO PETG vs SUNLU PETG, high-speed PETG vs regular PETG, PLA vs PETG filament and the 3D printers hub.




