Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Lapidary Saw vs Cabbing Machine: Which One Should You Buy?

A slab saw cuts rough stone into slabs, while a cabbing machine grinds and polishes those slabs into finished jewelry stones, and the listings show how the two sides differ.

Lapidary Saw vs Cabbing Machine: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Flyrivergo 6'' Lapidary Machine 3500RPM LapidaryFlyrivergo 6'' Lapidary Machine 3500RPM Lapidary9.6/10View on Amazon
  2. 2Hi-Tech Diamond 10" Lapidary Slab Saw for RocksHi-Tech Diamond 10" Lapidary Slab Saw for Rocks9.6/10View on Amazon
  3. 3Hi-Tech Diamond 10" Lapidary Slab Saw for RocksHi-Tech Diamond 10" Lapidary Slab Saw for Rocks9.6/10View on Amazon
  4. 4TOWIUOA 6In Stone PolisherTOWIUOA 6In Stone Polisher9.3/10View on Amazon

A rough stone holds a shape inside it, and lapidary work frees that shape in stages: rough cutting opens the stone, then shaping and polishing bring out color and pattern. Lapidary saw vs cabbing machine is the choice between the machine that slabs rough material and the machine that grinds and polishes those slabs into finished jewelry stones.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Verdict: pick a slab saw to cut rough stone into slabs, and pick a cabbing machine to shape and polish those slabs into finished stones. The Flyrivergo cabbing machine leads the grinding and polishing side here, while the Hi-Tech Diamond saw with a vise leads the saws for slabbing.

Machines on the list

Flyrivergo 6'' Lapidary Machine 3500RPM Lapidary

Flyrivergo 6'' Lapidary Machine 3500RPM Lapidary

Flyrivergo9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 550W variable speed cabbing machine with a brushless AC motor rated to a maximum of 3500 RPM, four 6-inch diamond discs and built-in water circulation.

Pros

  • 550W brushless AC motor, 3500 RPM maximum
  • Four 6-inch diamond discs: 150, 500, 800, 1200 grit
  • Built-in pump and water tank
  • Adjustable splash guard and mini angle gauge

Cons

  • Approximately 4 x 4 inch grinding area suits smaller stones
  • No slab blade, so rough cutting needs a saw
  • 6-inch discs only
  • Water tank needs filling before grinding
Hi-Tech Diamond 10" Lapidary Slab Saw for Rocks

Hi-Tech Diamond 10" Lapidary Slab Saw for Rocks

Hi-Tech Diamond9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-inch lapidary slab saw with a 1/3 HP motor at 1,725 RPM, a saw vise, two diamond blades and a 2-1/2 quart water reservoir.

Pros

  • 1/3 HP motor at 1,725 RPM
  • Saw vise holds rough material while slabbing
  • Two 10-inch diamond blades, 5/8-inch arbor
  • Polyethylene housing, easy to clean, drain plug

Cons

  • 35 lbs, heavy to move between benches
  • 10-inch blades only
  • Needs water in the reservoir before cutting
  • No warranty term is stated
Hi-Tech Diamond 10" Lapidary Slab Saw for Rocks

Hi-Tech Diamond 10" Lapidary Slab Saw for Rocks

Hi-Tech Diamond9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-inch lapidary slab saw with a 1/3 HP motor at 1,725 RPM, two diamond blades and a 2-1/2 quart water reservoir for larger slabbing projects.

Pros

  • 1/3 HP motor at 1,725 RPM
  • Two 10-inch diamond blades, 5/8-inch arbor
  • Removable work surface gives room for cutting
  • Polyethylene housing, easy to maintain

Cons

  • 33.0 pounds, heavy to move between benches
  • 10-inch blades only
  • Needs water in the reservoir before cutting
  • No warranty term is stated
TOWIUOA 6In Stone Polisher

TOWIUOA 6In Stone Polisher

TOWIUOA9.3/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6-inch flat lapidary polisher with a cast iron body, copper wire motor and adjustable scale, angle and height for cutting, carving, drilling, grinding and polishing.

Pros

  • Cast iron body with a copper wire motor
  • High-hardness electroplated grinding wheel
  • Adjustable scale, angle and height
  • Non-slip pads keep the machine stable

Cons

  • 6-inch wheel suits smaller stones
  • One grinding wheel only
  • No built-in water tank or pump
  • No slab blade, so rough cutting needs a saw

Side by side

Spec Flyrivergo 6in Cabbing Hi-Tech 10in Saw Vise Hi-Tech 10in Slab Saw TOWIUOA 6in Polisher
HQ Score 72 68 66 54
Motor 550W brushless AC, 3500 RPM maximum 1/3 HP, 1,725 RPM 1/3 HP, 1,725 RPM 2800 RPM, 110V; power stated as 1800W and 180W
Blade or disc Four 6-inch diamond discs, 150, 500, 800 and 1200 grit 10-inch notched and sintered diamond blades, 5/8-inch arbor 10-inch notched and sintered diamond blades, 5/8-inch arbor Flat grinding wheel, electroplated surface
Grinding area Approximately 4 x 4 inches Not stated in the listing Not stated in the listing Not stated in the listing
Water Built-in pump and water tank Reservoir up to 2-1/2 quarts Reservoir up to 2-1/2 quarts Not stated in the listing
Dimensions 8.6 inches x 7.8 inches x 8.3 inches 20.0 inches x 19.0 inches x 14.0 inches 20.0 inches x 19.0 inches x 14.0 inches Not stated in the listing
Weight Not stated in the listing 35.0 pounds 33.0 pounds Not stated in the listing
Warranty 1 year warranty Not stated in the listing Not stated in the listing Not stated in the listing

Specs are what each manufacturer publishes as its rating on the listing, collected 22 November 2026.

Lapidary saw vs cabbing machine: cutting and shaping

The Hi-Tech Diamond saws run a 1/3 HP motor at 1,725 RPM and accept 10-inch blades with a 5/8-inch arbor hole. The Flyrivergo cabbing machine runs a 550W brushless AC motor to a maximum speed of 3500 RPM, and the TOWIUOA polisher states 2800 RPM in its title. A saw turns rough rock, minerals, stone and glass into slabs; a cabbing machine grinds and polishes those slabs.

Workspace and size

The Flyrivergo machine is compact, at 8.6 inches x 7.8 inches x 8.3 inches, with a grinding area of approximately 4 x 4 inches. The Hi-Tech Diamond saws are bench machines at 20.0 inches x 19.0 inches x 14.0 inches, the vise version at 35.0 pounds and the plain version at 33.0 pounds.

Water and cooling

Each Hi-Tech Diamond saw holds up to 2-1/2 quarts of water in an integrated reservoir, with a splash guard and a drain plug. The Flyrivergo machine circulates water through its own pump and tank. The TOWIUOA polisher has no built-in water tank or pump.

What comes in the box

The vise saw ships with a saw vise, spray shield, apron, Allen wrench and manual, along with its notched and sintered blades. The plain saw ships with the same two blades, a spray shield, apron, Allen wrench and instructions, but no vise. The Flyrivergo machine ships with four discs, a blower and a cleaning cloth.

Support and warranty

Only the Flyrivergo listing states a warranty, at 1 year. The other listings state no warranty term.

Choose a lapidary saw if

  • You cut rough rock, minerals, stone or glass into slabs.
  • You want a vise in the box to hold rough material.
  • You have bench space for a 20.0 inch by 19.0 inch machine.

Choose a cabbing machine if

  • You already have slabs and want to grind and polish them into finished stones.
  • You want the Flyrivergo machine with graded discs, such as the 150, 500, 800 and 1200 grit set.
  • You want the Flyrivergo machine with built-in water circulation.
Safety

Wear eye protection, keep hands clear of blades and spinning discs, and keep water away from outlets.

Project Match

  • Slabbing rough rock, minerals, stone and glass: Hi-Tech 10in Saw Vise or Hi-Tech 10in Slab Saw.
  • Grinding and polishing slabs into finished stones: Flyrivergo 6in Cabbing.
  • Flat grinding and polishing for jewelry, jade and crafts: TOWIUOA 6in Polisher.
  • Shaping with graded grits: Flyrivergo 6in Cabbing.

FAQ: lasers and CNC

Should a beginner pick a lapidary saw or a cabbing machine?

Pick the machine for the stage of work at hand: a lapidary saw cuts rough stone into slabs, and a cabbing machine grinds and polishes slabs into finished stones.

Can a cabbing machine cut slabs?

Neither cabbing machine here ships with a slab saw blade. The TOWIUOA polisher states cutting among its uses, but slabbing rough stone into slabs needs a lapidary saw.

What size blades fit the Hi-Tech Diamond saws?

The Hi-Tech Diamond saws accept 10-inch blades with a 5/8-inch arbor hole, and each ships with notched and sintered diamond blades.

Do lapidary saws need water?

The Hi-Tech Diamond saws here do. Each holds up to 2-1/2 quarts of water in an integrated reservoir, with a splash guard and a drain plug.

What grit discs come with the Flyrivergo cabbing machine?

Four 6-inch diamond discs in 150, 500, 800 and 1200 grit, plus a blower and a cleaning cloth.

Related: rock tumbler vs cabbing machine, faceting machine vs cabbing machine and best rock tumbler.

More buying guides