How to Put Needle in Sewing Machine
How to put needle in sewing machine: loosen the clamp screw, set the new needle in with the flat side to the back, and tighten the screw.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
SCHMETZ Universal Sewing Machine Needles9.6/10View on Amazon - 2
SCHMETZ Microtex Sharp Sewing Machine Needles9.6/10View on Amazon - 3
SINGER Heavy Duty Needles 90/14 100/16 110/189.6/10View on Amazon - 4
SINGER Universal Regular Point Machine Needles9.6/10View on Amazon
How to put needle in sewing machine work starts at the needle clamp: loosen the clamp screw, slide the old needle out, set the new needle in with the flat side to the back, and tighten the screw. The steps below walk through each part, with the 4 needle packs in this guide as the gear.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
The listings here state pack counts and, for most packs, needle sizes, but not installation steps. The steps below follow the standard method for home sewing machines: loosen the clamp screw, set the needle with the flat side to the back, and tighten the screw.

SCHMETZ Universal Sewing Machine Needles
A 90/14 universal needle in a pack of 5 cards, 25 needles in all, with a slightly rounded point for woven and knit fabric.
Pros
- 90/14 size suits a wide range of woven and knit fabric, as the listing states
- Slightly rounded point glides through fabric without snagging
- Works with all home sewing machines, as the listing states
- 5 cards, 25 needles in all, for a full sewing kit
Cons
- No warranty term is stated
- Only one size, 90/14, so heavier fabric needs another needle
- Slightly rounded point, not the sharp point the Microtex listing states
- Needle length is not stated

SCHMETZ Microtex Sharp Sewing Machine Needles
A 90/14 Microtex needle with an ultra-thin sharp point, in a pack of 5 cards, 25 needles in all, for microfibers, silk and coated materials.
Pros
- Ultra-thin sharp point for precise stitches on microfibers and silk
- Suits foils, artificial leather and coated materials, as the listing states
- Compatible with all home sewing machines, as the listing states
- 5 cards, 25 needles in all
Cons
- No warranty term is stated
- Only one size, 90/14
- Knit fabric is not listed among the materials it suits
- Needle length is not stated

SINGER Heavy Duty Needles 90/14 100/16 110/18
A 5-needle heavy-duty pack in 90/14, 100/16 and 110/18 with two point styles for denim, leather and vinyl.
Pros
- Two point styles: sharp slender point for denim and woven fabrics, triangular point for leather and vinyl
- Reinforced, thick shafts in steel the maker describes as 2X stronger
- Color-coded needles in a carrying case with sizes marked over each slot
- For denim, leather, vinyl, corduroy and heavyweight woven materials
Cons
- Only 5 needles in the pack
- No warranty term is stated
- Only 1 needle in 110/18

SINGER Universal Regular Point Machine Needles
A 20-needle set of SINGER universal regular-point needles in assorted sizes, 2 packs of 10, color-coded by size, for most weights of woven fabrics.
Pros
- Three sizes in one set: 80/12, 90/14 and 100/16
- Color-coded needles for easy size selection
- Fits SINGER, Brother, Kenmore and other domestic machines
- 20 needles in 2 packs of 10
Cons
- For woven fabrics only, no knits stated
- Only 2 needles of size 100/16 per pack
- No needle system stated
- No warranty term stated
How to put needle in sewing machine: the short answer
Raise the needle to its highest point, loosen the clamp screw, and slide the old needle down and out. Set the new needle in with the flat side to the back and the point facing down, push it up as far as it goes, and tighten the clamp screw. The needle must sit straight in the clamp, or the stitch will skip and the needle can hit the plate.
Step 1: Raise the needle and loosen the clamp
Turn the handwheel toward you until the needle bar sits at its highest point. Loosen the needle clamp screw with your fingers or a small screwdriver, and let the old needle drop out. Keep the screw in the clamp so it does not fall into the machine.
Step 2: Set the new needle in place
Hold the new needle with the flat side to the back and the point facing down. Slide it up into the clamp as far as it goes, so the shank seats fully in the needle bar. The 90/14 needle in the SCHMETZ packs fits all home sewing machines, as the listing states, and the SINGER packs fit SINGER and other domestic machines.
Step 3: Tighten the clamp and check the stitch
Tighten the clamp screw until the needle holds firm, then turn the handwheel toward you and watch the needle pass through the plate without touching it. Sew a short seam on scrap fabric and look at the stitch: even stitches mean the needle sits right, and skipped stitches mean the needle may not sit right: check that it sits fully up in the clamp with the flat side to the back.
Step 4: Pick the right needle size
The size on the pack tells you what the needle suits. A 90/14 needle suits woven and knit fabric, as the SCHMETZ Universal listing states, and the Microtex 90/14 suits microfibers, silk, foils and coated materials. The SINGER Heavy Duty (on Amazon) pack steps up to 100/16 and 110/18 for denim, leather and heavy fabrics. For heavy fabric, see the best heavy-duty sewing machine needles for thick fabric guide. When the fabric changes, change the needle with it.
The gear: 4 needle packs for home sewing machines
Fitting a needle is easier when the pack states the size and the fabric it suits, and 3 of the 4 packs below state a size on the pack.
Common mistakes to avoid
- Setting the needle in with the flat side facing the wrong way.
- Leaving the needle only partway in the clamp.
- Using a bent or blunt needle after it hits a pin.
- Forcing the clamp screw instead of seating the needle first.
- Keeping the same needle for every fabric weight.
How to put needle in sewing machine: the short version
- Raise the needle to its highest point.
- Loosen the clamp screw and slide the old needle out.
- Set the new needle in with the flat side to the back and the point down.
- Push it up as far as it goes and tighten the clamp screw.
- Turn the handwheel and sew a short seam on scrap fabric.
FAQ: lasers and CNC
Which way does the flat side of a sewing machine needle face?
To the back, away from you, on most home sewing machines. The shank has one flat side and one round side: the flat side sits against the back of the needle bar, and the round side faces the front. If the machine manual states a different direction, follow the manual.
What size needle suits denim?
The SINGER Heavy Duty pack in this guide holds 100/16 and 110/18 needles for denim, leather and heavy fabrics. A 90/14 needle suits woven and knit fabric, as the SCHMETZ Universal listing states. When the fabric is heavy, step up from a 90/14 needle.
How often should a sewing machine needle be changed?
Change it when the stitch skips, the fabric snags, or the needle looks bent. A fresh needle keeps the stitch even, and the 25-needle SCHMETZ packs in this guide give you spares on hand.
Can a universal needle sew knit fabric?
Yes. The SCHMETZ Universal listing states its slightly rounded point glides through woven and knit fabrics without snagging. A sharp Microtex point suits fine, coated or slippery fabric instead.
Do SINGER needles fit other sewing machines?
The SINGER listings state the needles fit SINGER and other domestic machines. The SCHMETZ listings state the needles work with all home sewing machines. Check the pack before you buy, and match the size to the fabric.
What does 90/14 mean on a needle pack?
It is the size on the pack: the SCHMETZ Universal and Microtex needles in this guide are 90/14, and the SINGER Heavy Duty pack adds 100/16 and 110/18 sizes. A larger size suits heavier fabric.
Related: the best embroidery machine needles, best twin needle for sewing machine and best beginner sewing machine for quilting guides.




