Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How to Clean Jewelry with Baking Soda Safely

A gentle baking soda paste method for tarnished jewelry, with clear limits and ultrasonic gear for dirt cloths cannot reach.

How to Clean Jewelry with Baking Soda Safely
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Klivvio Ultrasonic Jewelry CleanerKlivvio Ultrasonic Jewelry Cleaner9.5/10View on Amazon
  2. 2Ultrasonic Jewelry CleanerUltrasonic Jewelry Cleaner9.5/10View on Amazon
  3. 3WoldoClean Ultrasonic Cleaner Solution ConcentrateWoldoClean Ultrasonic Cleaner Solution Concentrate9.4/10View on Amazon
  4. 4iSonic Ultrasonic Jewelry & Eyeglass CleaneriSonic Ultrasonic Jewelry & Eyeglass Cleaner9.4/10View on Amazon

Tarnished rings and chains look dull when surface film builds up and dirt settles into settings and links where a cloth cannot reach, and everyday wear can leave a film that plain water alone may not shift. How to clean jewelry with baking soda comes down to a gentle paste worked over the surface with a soft cloth, a rinse in clean water, careful drying, and ultrasonic gear for the dirt that hides in crevices.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Honest note

Baking soda paste is a surface method. It suits plain metal surfaces and everyday tarnish. Fragile items and coated pieces need a gentler route, and the gear section below covers the crevice work a cloth cannot do.

Klivvio Ultrasonic Jewelry Cleaner

Klivvio Ultrasonic Jewelry Cleaner

Klivvio9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A compact 24W ultrasonic cleaner at 48,000Hz with 4 cleaning modes for small batches of jewelry and glasses.

Pros

  • 48,000Hz sound waves for dirt in crevices, per the maker
  • 4 preset modes at 180, 360, 480 and 600 seconds
  • Auto shut off with a digital display
  • Compact 13.5oz capacity for travel and home use

Cons

  • Maker states it will not remove tarnish
  • Glasses with scratched or cracked coating are not suitable
  • No warranty term is stated
  • Small 13.5oz capacity suits small batches only
Ultrasonic Jewelry Cleaner

Ultrasonic Jewelry Cleaner

PAKCQNH9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 500ml ultrasonic cleaner with triple-frequency sound waves and 5 preset cycles for the deep-cleaning step in settings and links.

Pros

  • Triple-frequency sound waves at 50/55/60kHz for crevices a cloth cannot reach
  • 500ml stainless steel tank holds 4-6 jewelry pieces at once, per the maker
  • 5 preset cycles from 180 to 600 seconds
  • Basket, cord and manual included in the kit

Cons

  • No warranty term is stated
  • Tank holds 4-6 pieces, so larger batches need repeated cycles
  • Stubborn grime needs added ultrasonic solution, per the maker
  • Watches must be non-electronic for this cleaner
WoldoClean Ultrasonic Cleaner Solution Concentrate

WoldoClean Ultrasonic Cleaner Solution Concentrate

WoldoClean9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 25.4 fl oz ultrasonic cleaner concentrate for the tank step, diluted in warm water for jewelry and eyeglasses.

Pros

  • One 25.4 fl oz bottle makes 8 gallons at 1 to 40 dilution
  • Works in ultrasonic tanks from 8 to 64 fl oz, per the maker
  • Maker states non toxic and ammonia free
  • One capful per tank of warm water, per the maker

Cons

  • Needs an ultrasonic cleaner machine to work
  • Concentrate must be diluted before use
  • No warranty term is stated
  • Pieces still need a clean water rinse and drying
iSonic Ultrasonic Jewelry & Eyeglass Cleaner

iSonic Ultrasonic Jewelry & Eyeglass Cleaner

iSonic9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8 oz ultrasonic cleaner solution in a 2-pack for the tank step on gold, silver, diamond and eyewear.

Pros

  • Made for gold, silver, diamond, watch and eye wear cleaning
  • Concentrated formula at one capful per use, per the maker
  • Maker states non-toxic and biodegradable
  • 2-pack of 8 oz bottles

Cons

  • Needs an ultrasonic cleaner machine to work
  • 8 oz bottles suit smaller tanks and fewer cycles
  • No warranty term is stated
  • Solution alone does not replace gentle cloth work on tarnish

How to clean jewelry with baking soda, step by step

Start with clean hands and a soft cloth. Mix baking soda with warm water into a smooth paste that holds its shape on the cloth. Work the paste over the jewelry with light pressure, turning the piece so the cloth reaches links, settings and the underside of stones. Keep the motion gentle and let the paste do the work rather than pressing hard.

Rinse the piece in clean water until no paste remains in the settings. Dry it fully with a soft, lint free cloth before you wear it or put it away, since trapped moisture can leave spots. If a piece still looks dull in the crevices after the paste step, that is the point where ultrasonic cleaning earns its place.

What baking soda paste can and cannot do

Paste and a cloth handle surface film and light tarnish on plain metal. Dirt packed into settings, chain links and engraved detail sits where cloth fibers cannot reach, which is why the iSonic solution maker describes its solution as working in crevices where cloths and brushes cannot reach. Note the limit in the other direction too: the Klivvio maker states that model will not remove tarnish. That is a statement about that cleaner, not about every tank solution in this guide, and this guide uses the paste step for surface film.

Skip the paste on fragile items. One ultrasonic maker names pearls and antique jewelry as fragile examples, and the Klivvio maker states glasses or sunglasses with scratches or cracks in the coating are not suitable for ultrasonic cleaning. When a piece is fragile, a plain soft cloth and clean water are the gentler route in this guide, or a jeweler can advise on that specific piece.

Ultrasonic gear for the crevice step

When dirt sits in settings and links where a cloth cannot reach, ultrasonic cleaners and their tank solutions handle that deep-cleaning step.

How to clean jewelry with baking soda: the short version

  1. Mix baking soda and warm water into a smooth paste.
  2. Work the paste over the surface with a soft cloth and light pressure.
  3. Rinse in clean water until no paste remains.
  4. Dry fully with a soft, lint free cloth.
  5. Use ultrasonic gear for dirt in crevices, and skip fragile pieces.

FAQ: lasers and CNC

Does baking soda remove tarnish from jewelry?

A gentle paste worked with a soft cloth handles surface film and light tarnish on plain metal. Heavy dirt in settings is a different problem, and ultrasonic gear is made for that crevice work.

Is baking soda safe for all jewelry?

No. Fragile items such as pearls and antique jewelry need gentler handling. Separately, the Klivvio maker states glasses or sunglasses with scratches or cracks in the coating are not suitable for ultrasonic cleaning. Keep fragile jewelry pieces to a soft cloth and clean water.

Do you need an ultrasonic cleaner as well?

Not for surface tarnish. Ultrasonic cleaners earn their place when oils and dirt hide in settings and links where a cloth cannot reach. The iSonic solution maker states its solution lifts buildup in crevices without scrubbing, and the cleaner makers describe their own cycles for dirt in settings and links.

Can you put baking soda in an ultrasonic cleaner?

The concentrate in this guide is directed at one capful per tank of warm water, and the other solution at one capful per use. The two cleaner makers describe tap water and added solution differently, so keep baking soda for the cloth and paste step and follow the directions for the specific machine and solution in hand.

Related: the jewelry and lapidary hub.

More buying guides