30 vs 90 Degree V Bit: Which One Should You Buy?
A 30-degree v bit suits fine lettering and detail while a 90-degree bit suits large letters and wide grooves; four 30-degree bits are compared…
Bits and shop gear for CNC routers: end mills, V-bits, spoilboards, clamps and dust collection. The right bit and workholding matter as much as the machine.
Bare metal points to a fiber laser, clear acrylic to CO2, wood and leather on a budget to a diode, and thick stock or 3D carving to a CNC router. The Machine Finder narrows it down in five questions, and the material guide shows what each type can cut.
A 30-degree v bit suits fine lettering and detail while a 90-degree bit suits large letters and wide grooves; four 30-degree bits are compared…
Five 1/2 in compression router bits compared by shank, cut length, coating and bearings.
Five clear PVC dust collection hoses for woodworking, compared by diameter, length, wire, clamps and weight.
Five aluminum T-tracks for a 4x4 CNC router compared by stated length, pack size, profile and included screws, from 48 in 4-packs to a…
Five hinge mortise router bits under 35 compared by cutting diameter, cutting depth, carbide grade, bearing design and stated warranty.
Five spoilboard surfacing bits for MDF compared by stated cutting diameter, shank size, insert type and coating.
Five aluminum T-tracks for a 4x8 CNC router bed, from 48 inch 4-packs to a single black anodized track, compared by stated specs.
Five budget ER11 and rotary collet nuts compared by stated thread, taper, material and pack size, for CNC and Dremel-style tools.
Five flush trim and pattern router bits under 25 dollars compared by cutting height, shank size, flutes, anti-kickback design and warranty, for trim work…
A dovetail joint locks with angled tails while a finger joint stacks straight glue-dependent fingers; this guide explains both joints and ranks four dovetail…