Black DTF Powder vs White: Which One Should You Buy?
Two black and two white DTF hot melt adhesive powders compared on pack size, fabric range, particle size and warranty, side by side.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
CenDale DTF Powder: 1KG/35.2OZ White Hot Melt9.7/10View on Amazon - 2
CenDale DTF Powder, 500g/17.6oz Black Hot Melt9.7/10View on Amazon - 3
Godora DTF Powder, White Hot Melt Adhesive for DTF9.6/10View on Amazon - 4
Godora DTF Powder, Black Hot Melt Adhesive for DTF9.5/10View on Amazon
A custom shirt starts as a print on film, and the powder is what turns that print into a transfer that holds on fabric. Black DTF powder vs white is the first choice in that step. This comparison puts two black powders and two white powders side by side.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: the CenDale white 1KG leads the white side on pack size and warranty, and the CenDale black 500g leads the black side on the same measures. Godora’s two 16 oz powders suit smaller batches, though the black listing calls the powder white in two bullets. Choose the color first, then pack size and warranty.
Machines on the list

CenDale DTF Powder: 1KG/35.2OZ White Hot Melt
A 1KG white hot melt adhesive powder for DTF transfers, stated for a wide fabric range with a 1 year warranty.
Pros
- 1KG pack, listed as 35.2 oz, the largest size here
- 80-200um particle size stated
- Works with DTF and DTG printers, including converted Epson printers
- 1 year warranty stated
Cons
- No press temperature or time stated
- No stated application rate for hand or shaker use
- White only; black is a separate listing

CenDale DTF Powder, 500g/17.6oz Black Hot Melt
A 500g black hot melt adhesive powder for DTF transfers, stated for the widest fabric range here with a 1 Year warranty.
Pros
- 500g pack, listed as 17.6 oz, with 80-200um particle size stated
- TPU rubber powder and activated carbon composition stated
- Widest fabric list here, including jeans, Lycra and EVA
- 1 Year warranty stated
Cons
- No press temperature or time stated
- No stated application rate for hand or shaker use
- Black only; white is a separate listing

Godora DTF Powder, White Hot Melt Adhesive for DTF
A 16 oz white hot melt adhesive powder for DTF transfers in a barrel container, stated for a wide fabric range.
Pros
- 16 oz barrel-shaped container with a spoon
- Stated for cotton, silk, polyester, denim, nylon, leather and 50/50 blends
- Works with an automated shaker or by hand
- Stated for all DTF and DTG printers on any PET film size
Cons
- No warranty term stated
- No particle size stated
- No press temperature or time stated
- White only; black is a separate listing

Godora DTF Powder, Black Hot Melt Adhesive for DTF
A 16 oz black hot melt adhesive powder for DTF transfers in a barrel container, stated for the same fabric range as its white version.
Pros
- 16 oz barrel-shaped container with a spoon
- Stated for cotton, silk, polyester, denim, nylon, leather and 50/50 blends
- Works with an automated shaker or by hand
- Stated for all DTF and DTG printers on any PET film size
Cons
- No warranty term stated
- No particle size stated
- No press temperature or time stated
Other machines to compare
DTF Powder White 1KG/35.3 oz Digital Transfer Hot MeltCheck price on Amazon
Yitentek DTF Powder BlackCheck price on Amazon
DTFPOWER Soft Feel DTF PowderCheck price on Amazon
A-SUB DTF Powder Black 35.3 ozCheck price on Amazon
LCL DTF Powder 1000g/35.3oz Black Digital Transfer Hot MeltCheck price on Amazon
LCL DTF Powder 500g/17.6oz Black Digital Transfer Hot MeltCheck price on Amazon
Side by side
| Spec | CenDale White 1KG | CenDale Black 500g | Godora White 16 oz | Godora Black 16 oz |
|---|---|---|---|---|
| HQ Score | 70 | 68 | 56 | 55 |
| Pack size | 1KG / 35.2 oz | 500g / 17.6 oz | 16 oz (450g) | 16 oz (450g) |
| Particle size | 80-200um | 80-200um | Not stated | Not stated |
| Composition | TPU | TPU and activated carbon | Not stated | Not stated |
| Fabrics | Non-treated cotton, silk, polyester and more | Cotton, jeans, silk, polyester, denim, nylon, Lycra, leather, EVA | Cotton, silk, polyester, denim, nylon, leather, 50/50 blends | Cotton, silk, polyester, denim, nylon, leather, 50/50 blends |
| Printers | DTF and DTG printers | DTF, DTG, converted Epson | DTF and DTG printers | DTF and DTG printers |
| Warranty | 1 year | 1 Year | No term stated | No term stated |
Size and performance figures are the brand’s ratings quoted from listings on 5 November 2026.
Black DTF Powder vs White: What Actually Differs
Both colors are hot melt adhesive powder for DTF transfers: powder sticks to the ink on PET film, then a heat press moves the print onto fabric, with no pretreatment step. Both sides state DTF and DTG printers. What differs is color, pack size, particle size and warranty: CenDale states an 80-200um particle size and a 1 year warranty on both powders; Godora states neither on either. The CenDale black listing states its powder works on all colors, including black and white fabrics; the white listings state a fabric range but no color range, so pick the color that matches the print and the fabric, then compare pack size.
Fabrics and printers
Godora states non-treated cotton, silk, polyester, denim, nylon, leather and 50/50 blends on both colors. CenDale black adds jeans, Lycra and EVA, plus tote bags and caps. CenDale white states cotton, silk, polyester and a variety of materials. On printers, all four state DTF and DTG printers, and CenDale names 6 and 8 color Epson printers converted to DTF. Godora states any PET film size on both colors, CenDale black states any PET film size, and CenDale white states hot and cold peel PET films.
Application and storage
Godora states shaker and hand application on both colors, in a barrel-shaped container with a spoon. CenDale black states automatic shaker use, and CenDale white states wide compatibility. Godora white states the powder needs to be used with a heat press. All four listings state storage in a cool, dry place, and none states a heat press temperature, a press time or an application rate.
Choose black DTF powder if
- Your prints sit on dark fabric, where the CenDale black listing states use on all colors.
- You want the 80-200um size and 1 Year warranty of the CenDale black 500g.
- You want a smaller 16 oz pack in the Godora barrel container.
Choose white DTF powder if
- You want the largest pack here, the CenDale white 1KG.
- You want a 1 year warranty, stated on the CenDale white 1KG.
- You want a 16 oz pack in a barrel container from Godora white.
Project Match
- T-shirts on non-treated cotton: any of the four.
- Denim and jeans: CenDale black states jeans, and Godora states denim on both colors.
- Tote bags and caps: CenDale black names both.
FAQ: lasers and CNC
How does DTF powder work?
The listings describe powder that sticks to the ink on PET film instead of the film, then moves onto fabric with a heat press, with no pretreatment step.
What is the best DTF powder?
It depends on color and pack size. CenDale white 1KG leads on pack size and warranty, and CenDale black 500g leads the black side.
Why use black DTF powder?
The CenDale black listing states the powder works on all colors, including black and white fabrics, so it suits prints where the powder color should match dark fabric.
How to use DTF powder with sublimation paper?
The listings do not describe use with sublimation paper. They describe DTF and DTG printers with PET film.
How long does DTF powder take to set under a heat press?
Not stated. None of the four listings gives a press time or a temperature.
Related: craft machines.




