Best Leather Hole Punch (2026): 5 Picks for Belts and Straps
A leather hole punch that fits the belt, the strap or the watch band starts with the right hole size, and these 5 picks cover sizes from 1.0 to 5.0 mm.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallDiyife Rotary Punch9.6/10View on Amazon - 2
Best for BeltsXOOL Rotary Punch Kit9.6/10View on Amazon - 3
Best Kit ExtrasPro-Master Punch Kit9.5/10View on Amazon - 4
Best Small HolesOWDEN Hollow Punch Set9.4/10View on Amazon
A belt that fits, a watch band with a fresh hole, a strap that sits right: each of these starts with a clean round hole in leather, and a best leather hole punch makes that hole without tearing the edge. This guide compares rotary pliers and a hollow punch set by hole size, build and what comes in the box, so the punch you pick matches the work on the bench.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Diyife Rotary Punch: 6 hole sizes from 2 to 4.5 mm, a double lever, 2 spare plates, a screwdriver, a ruler and a sharpening stick in the box. Check price on Amazon
- Best for Belts XOOL Rotary Punch Kit: 6 hole sizes from 2 to 4.5 mm with a double lever and a grinding rod, sized for belts, straps, saddles and watch bands. Check price on Amazon
- Best Kit Extras Pro-Master Punch Kit: High manganese steel with a double lever, 3 spare punch plates, an awl tool, an Ebook and video guides. Check price on Amazon
- Best Small Holes OWDEN Hollow Punch Set: 6 hollow punches from 1.0 to 5.0 mm with a 4 in x 4 in cutting mat, for small holes in belts, watch bands and straps. Check price on Amazon
Machines on the list

Diyife Professional Leather Hole Puncher
A blue rotary punch plier with 6 hole sizes from 2 to 4.5 mm, a double lever, non-slip PVC handles and a full set of spares.
Pros
- 6 hole sizes: 2, 2.5, 3, 3.5, 4 and 4.5 mm, marked on the wheel
- Double lever design for less hand strain
- 2 spare plates, a screwdriver, a ruler and a sharpening stick in the box
- Plated steel build with a stainless buckle safe lock
Cons
- No warranty term is stated
- Punches round holes only, in the 6 sizes on the wheel
- No hole size below 2 mm for fine work
- Handle is PVC plastic, not a metal grip

Revolving Punch Plier Kit
A heavy duty rotary punch plier with 6 hole sizes from 2 to 4.5 mm, a double lever and a grinding rod, for belts, watch bands and straps.
Pros
- 6 hole sizes: 2, 2.5, 3, 3.5, 4 and 4.5 mm
- Double lever mechanism with spring tension for one-hand use
- Plated steel with a brass pad and a stainless buckle safe lock
- Grinding rod in the kit for cleaning the punch heads
Cons
- No spare punch plates in the box
- Punches round holes only, in the 6 sizes on the wheel
- No ruler or measuring guide stated
- Handles are not cushioned

Pro-Master Belt Hole Puncher for Leather
A heavy duty rotary belt hole puncher in high manganese steel with 6 sizes from 2 to 4.5 mm, a double lever and cushioned non-slip handles.
Pros
- 6 rotary sizes from 2 to 4.5 mm
- High manganese steel rotary head, built to hold its shape
- Double lever action for less hand strength per press
- 3 spare punch plates, an awl tool, an Ebook and video guides in the box
Cons
- No warranty term is stated
- No safe lock stated for storage
- No ruler or sharpening stick stated
- Works on leather, plastic and canvas only, per the listing

OWDEN Professional 6Pcs Leather Hollow Punch Set
A 6-piece slim hollow punch set from 1.0 to 5.0 mm with a 4 in x 4 in cutting mat and a red PVC pouch, for belts, watch bands and straps.
Pros
- 6 hollow punches: 1.0, 1.5, 2.0, 3.0, 4.0 and 5.0 mm
- Smallest hole here at 1.0 mm, for fine strap and gasket work
- Slim style with a laser-marked logo and size on each punch
- Black finish against rust, with a 4 in x 4 in cutting mat and a red PVC pouch
Cons
- No rotary head, each size is a separate punch to keep track of
- Sizes skip 2.5, 3.5 and 4.5 mm
- No sharpening stick or grinding rod stated
- Pouch holds the set, but no spare punches are in the box

UNCO- Leather Hole Punch Tool
A rotary leather hole punch tool with a purple handle, a durable metal body and a smooth rotary head, for belts, straps and leatherwork.
Pros
- Rotary head with multiple hole sizes for belts and leather
- Durable metal body with a smooth rotary head
- Ergonomic, non-slip handles for controlled pressure
- Suits belt adjustments, leatherwork and DIY crafts
Cons
- Hole sizes are not stated, so the buyer cannot match a size before ordering
- No spare plates, sharpening stick, mat or pouch stated in the box
- No safe lock stated for storage
- Purple handle only, a single color choice
Specs compared
| Model | HQ Score | Hole sizes | Type | Handles | Extras | Safety | Warranty |
|---|---|---|---|---|---|---|---|
| Diyife Rotary Punch | 9.6/10 | 2 to 4.5 mm (6 sizes) | Rotary plier | Double lever, non-slip PVC | 2 spare plates, screwdriver, ruler, sharpening stick | Safe lock buckle | Not stated |
| XOOL Rotary Punch Kit | 9.6/10 | 2 to 4.5 mm (6 sizes) | Rotary plier | Double lever, non-slip | Grinding rod | Safe lock buckle | Not stated |
| Pro-Master Punch Kit | 9.5/10 | 2 to 4.5 mm (6 sizes) | Rotary plier | Double lever, cushioned non-slip | 3 spare plates, awl, Ebook, video guides | Not stated | Not stated |
| OWDEN Hollow Punch Set | 9.4/10 | 1.0 to 5.0 mm (6 sizes) | Hollow punch set | Not stated | Cutting mat, red PVC pouch | Not stated | Not stated |
| UNCO Leather Punch | 9.4/10 | Not stated | Rotary plier | Non-slip, ergonomic | Not stated | Not stated | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 15 November 2026. Hole size is the diameter of the hole the punch makes.
What the listings tell you, and what they leave out
3 of the rotary pliers here list 6 hole sizes each, and the hollow punch set lists 6 punches of its own. The rotary pliers share a 2 to 4.5 mm range, while the hollow set runs 1.0 to 5.0 mm, so the smallest hole in this guide belongs to the hollow set and the pliers share the same span. Double lever action shows up on the pliers that name a mechanism, and cushioned handles show up on one pick only.
What the listings leave out matters as much. The UNCO punch states multiple hole sizes but gives no figures, so its range stays unknown. No pick in this guide states a warranty term, and no pick states a punch length. The OWDEN set states its weight at 0.45 lb, while the plier weights run higher.
Buying guide: the best leather hole punch
Rotary pliers vs hollow punch set
A rotary plier turns a wheel to pick a size, then squeezes to punch. A hollow punch set holds a separate punch for each size, so the bench needs space for the set and the mat. The pliers here suit belts, straps and watch bands that need a quick size change, while the hollow set suits small, precise holes from 1.0 mm up.
Hole sizes
The pliers here cover 2 to 4.5 mm in 6 sizes: 2, 2.5, 3, 3.5, 4 and 4.5 mm. The hollow set covers 1.0 to 5.0 mm in 6 punches: 1.0, 1.5, 2.0, 3.0, 4.0 and 5.0 mm. For a belt, the 2 to 4.5 mm span covers the usual holes, while a watch band or a gasket may need the 1.0 mm or 1.5 mm punch. Check the size against the strap before buying.
Handles and leverage
A double lever cuts the hand strength each press needs, and the pliers that name a mechanism all use one. Cushioned, non-slip handles suit repetitive work, and a non-slip grip keeps the plier steady while the punch goes through. The hollow set has no handle or lever, so it works a different way on the bench.
Extras that matter
Spare punch plates keep a rotary plier working when a plate wears. The Diyife kit holds 2 spare plates and the Pro-Master kit holds 3, and each kit adds its own extras: a screwdriver, a ruler and a sharpening stick with the Diyife kit, and an awl tool, an Ebook and video guides with the Pro-Master kit. A sharpening stick or grinding rod keeps a blunt head sharp, and a ruler measures the piece before the punch. The OWDEN set adds a cutting mat and a pouch, which keep the punches and the bench in order.
Project Match
- Belts and straps: XOOL Rotary Punch Kit, Pro-Master Punch Kit and Diyife Rotary Punch, each with 6 sizes from 2 to 4.5 mm.
- Watch bands: XOOL Rotary Punch Kit, Pro-Master Punch Kit and OWDEN Hollow Punch Set, down to 1.0 mm on the hollow set.
- Dog collars and saddles: XOOL Rotary Punch Kit and Diyife Rotary Punch, both listing collars and saddles.
- Small holes and gaskets: OWDEN Hollow Punch Set, with 1.0 and 1.5 mm punches.
- Craft work on canvas, fabric and cardboard: XOOL Rotary Punch Kit and Diyife Rotary Punch.
How the scores add up
Each punch is scored on performance, build, value, safety and warranty. How we pick explains the weights, and a spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Diyife Rotary Punch | 9.6 | 32 | 22 | 21 | 3 | 0 |
| XOOL Rotary Punch Kit | 9.6 | 30 | 21 | 21 | 3 | 0 |
| Pro-Master Punch Kit | 9.5 | 30 | 22 | 21 | 0 | 0 |
| OWDEN Hollow Punch Set | 9.4 | 28 | 21 | 20 | 0 | 0 |
| UNCO Leather Punch | 9.4 | 27 | 20 | 20 | 0 | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.
FAQ: lasers and CNC
How do I use a leather hole punch?
Pick the hole size on the wheel, line the punch up on the mark, and squeeze the handles. The Diyife listing adds a ruler for measuring the piece and a screwdriver for swapping spare plates, and the XOOL kit adds a grinding rod for cleaning the punch heads.
How do I punch a hole in a leather belt?
Measure the spot, pick a size from 2 to 4.5 mm on a rotary plier, and punch through the belt. The pliers here list belts among their uses, and the hollow set covers belts with punches from 1.0 to 5.0 mm. Pad soft or thin material with cardboard, as the Diyife listing advises.
What size is a standard hole punch?
There is no single standard size in these listings. The rotary pliers here run 2 to 4.5 mm, and the hollow set runs 1.0 to 5.0 mm. Match the punch to the strap and the buckle, not to a fixed number.
What size hole punch do I need for a belt?
A rotary plier with sizes from 2 to 4.5 mm covers belt holes, and the Pro-Master, XOOL and Diyife pliers all list belt adjustments among their uses. For a fine hole, the OWDEN set starts at 1.0 mm.
How do I keep a leather hole punch sharp?
Use the sharpening stick or grinding rod that comes with the kit. The Diyife kit includes a sharpening stick, and the XOOL kit includes a grinding rod for cleaning and sharpening the punch heads. Wipe the OWDEN punches with anti-rust oil after use.
Related: the resin and craft supplies hub, can you laser engrave leather, the best blank leather belt for laser engraving guide, the best seam roller for leather guide and veg tan vs bonded leather for laser engraving.




