Best Copper Wire for Jewelry (2026)
Five copper wires for jewelry making, from 16 gauge frame wire to a 6-roll kit in 28 gauge, compared by gauge, length and purity.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallFIVEIZERO 6-Roll Kit9.7/10View on Amazon - 2
Best for Fine DetailTherwen 24 Gauge9.6/10View on Amazon - 3
Best Bulk SpoolYEZHET 20 Gauge9.6/10View on Amazon - 4
Best Kit with ToolsModacraft 18 Gauge9.6/10View on Amazon - 5
Best Heavy GaugeMangolite 16 Gauge9.5/10View on Amazon
A wire-wrapped pendant starts with the right wire: soft enough to bend by hand, strong enough to hold a stone, and in a gauge that suits the piece. The best copper wire for jewelry is the one whose gauge, length and temper match the work on the bench, from fine coils around beads to bold frames for bracelets. This roundup compares copper wires on what each listing states: gauge, length, purity and what comes in the box.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall FIVEIZERO 6-Roll Kit: Six gauges from 18 to 28 in one kit, with about 213 ft of 99.9% pure dead soft copper. Check price on Amazon
- Best for Fine Detail Therwen 24 Gauge: 100 ft of 24 gauge wire at 0.5 mm, thin enough to thread through most beads. Check price on Amazon
- Best Bulk Spool YEZHET 20 Gauge: 330 ft of 20 gauge wire on a 1 pound spool for long runs of frame wire. Check price on Amazon
- Best Kit with Tools Modacraft 18 Gauge: 65 ft of 18 gauge wire with 4-in-1 pliers for loops, shaping, crimping and cutting. Check price on Amazon
- Best Heavy Gauge Mangolite 16 Gauge: 16 gauge wire at 1.3 mm, certified 99.9% pure with a COA and polishing cloth. Check price on Amazon
Machines on the list

FIVEIZERO 6 Rolls 6 Size Jewelry Making Copper
A 6-roll kit with 18, 20, 22, 24, 26 and 28 gauge wire, about 213 ft of 99.9% pure dead soft bare copper in total.
Pros
- 6 gauges in one kit: 18, 20, 22, 24, 26 and 28
- About 213 ft of wire in total
- 99.9% pure solid bare copper, dead soft
- Each gauge on its own reel for organized storage
Cons
- Finest gauges run about 5 m each, so they run out first
- Longest single roll is about 20 m, not a bulk spool
- No pliers, cutters or findings in the kit
- Bare copper darkens into a patina with air exposure

Therwen 100ft 24 Gauge Copper Wire for Jewelry
A 100 ft spool of 24 gauge, 0.5 mm bare copper wire, 99.9% pure and dead soft, for wire wrapping and beading.
Pros
- 100 ft of 24 gauge wire, 0.5 mm in diameter
- 99.9% pure bare copper with no coating to strip
- Threads through most beads and bends into tight coils by hand
- Dead soft wire that holds the shape it is set to
Cons
- 24 gauge only, so frame work needs a second spool
- Cut ends can be sharp, so gloves are needed
- Uncoated wire darkens into a patina with air exposure
- No tools, findings or polishing cloth in the box

99.9% Solid Bare Copper Wire(20 Gauge, 330Ft)
A 1 pound spool with 330 ft of 20 gauge, 0.8 mm solid bare copper wire, 99.9% pure and dead soft.
Pros
- 330 ft of 20 gauge wire on a 1 pound spool
- 99.9% solid bare copper, dead soft
- Lead free and nickel free
- High malleability for crafts, jewelry making and home decor
Cons
- 20 gauge only, so fine detail work needs a thinner wire
- No warranty term is stated
- No tools or findings in the box
- Bare copper darkens into a patina with air exposure

Modacraft 18 Gauge Copper Wire for Jewelry Making
65 ft of 18 gauge, 1 mm copper wire with a protective coating, sold with 4-in-1 pliers for jewelry making.
Pros
- 65 ft of 18 gauge, 1 mm copper wire
- 4-in-1 pliers included for loops, shaping, crimping and cutting
- Transparent protective layer resists oxidation and fading
- Non-slip rubber handles with double-leaf springs
Cons
- A single gauge, so fine detail work needs a thinner wire
- Pliers arrive oil-coated and may look dirty until wiped clean
- Cutter is made for soft wires
- 65 ft suits small jewelry pieces, not large sculpture work

16 Gauge/1.3mm Copper Wire for Jewelry Making
40 ft of 16 gauge, 1.3 mm dead soft copper wire, 99.9% pure with a COA and polishing cloth, in a 5 oz spool.
Pros
- 16 gauge, 1.3 mm wire for bold bracelets and structure
- Certified 99.9% pure with a COA
- Polishing cloth included
- Dead soft and pliable for micro-wrapping
Cons
- 40 ft, the smallest length in this roundup
- 16 gauge is the thickest here, not for fine detail work
- No warranty term is stated
- Bare copper develops a natural patina with air exposure
Other machines to compare
14 Gauge/1.6mm Copper Wire for Jewelry MakingCheck price on Amazon
18 Gauge/1.0mm Copper Wire for Jewelry MakingCheck price on Amazon
Therwen 100ft 22 Gauge Copper Wire for Jewelry MakingCheck price on Amazon
Therwen 100ft 20 Gauge Copper Wire for Jewelry MakingCheck price on Amazon
99.9% Solid Bare Copper WireCheck price on Amazon
Specs compared
| Wire | HQ Score | Gauge | Length | Purity | Warranty |
|---|---|---|---|---|---|
| FIVEIZERO 6-Roll Kit | 9.7/10 | 18, 20, 22, 24, 26, 28 | About 213 ft | 99.9% pure | Not stated |
| Therwen 24 Gauge | 9.6/10 | 24 | 100 ft | 99.9% pure | Not stated |
| YEZHET 20 Gauge | 9.6/10 | 20 | 330 ft | 99.9% pure | Not stated |
| Modacraft 18 Gauge | 9.6/10 | 18 | 65 ft | Not stated | Not stated |
| Mangolite 16 Gauge | 9.5/10 | 16 | 40 ft | 99.9% pure | Not stated |
These numbers come straight from each maker’s listing and are rated, not measured by us (20 November 2026).
Buying guide: the best copper wire for jewelry
Match the gauge to the piece
Gauge sets what the wire can do: 16 gauge holds bold bracelets and frames, 18 and 20 gauge suit rings, pendants and general wrapping, and 24 gauge and finer thread through beads and coil into small loops. The higher the gauge number, the thinner the wire, so a 28 gauge wire bends around the smallest beads while a 16 gauge wire holds its shape under a stone. Pick the gauge for the piece first, then check the length.
Length, spool size and how much wire a project takes
Lengths here run from 40 ft on the smallest spool to 330 ft on the 1 pound spool, with a 100 ft spool and a 65 ft set between them, and the 6-roll kit holds about 213 ft across six gauges. A single bracelet or pair of earrings uses a short length, while wire-wrapped trees and sculpture armatures take much more, so match the spool to the size of the work. A 1 pound spool suits a bench that goes through wire every week, and a 5 oz spool suits a maker starting out.
Bare copper, coating and patina
Most of the wires here are bare copper with no coating, and bare copper darkens into a natural patina with air exposure. The Modacraft wire carries a transparent protective layer that resists oxidation and fading, so it stays bright longer. The Mangolite wire ships with a polishing cloth, and the Therwen wire is uncoated, so it can be cut and shaped straight off the spool with regular pliers. If a bright finish matters, plan on polishing, and if a darkened finish suits the piece, bare copper gets there on its own.
Bare copper wire has sharp cut ends: wear gloves or handle cut pieces carefully, as the Therwen listing notes. Keep cut ends away from skin when trimming, and store loose pieces where they cannot snag.
Project Match
- Wire-wrapped trees and small sculptures: the Mangolite 16 gauge wire, made for bold structure.
- Beaded bracelets, jump rings and ear wires: the Therwen 24 gauge spool, which threads through most beads.
- Rings, pendants and wrapping with tools in the box: the Modacraft 18 gauge set with 4-in-1 pliers.
- Every gauge at hand for mixed work: the FIVEIZERO 6-roll kit, from 18 to 28 gauge.
- Long runs of frame wire: the YEZHET 20 gauge spool with 330 ft on a 1 pound spool.
How the scores add up
Each wire is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing. No listing here states a warranty term or a safety certification, so safety and warranty score zero across the roundup.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| FIVEIZERO 6-Roll Kit | 9.7 | 32 | 21 | 22 | n/a | 0 |
| Therwen 24 Gauge | 9.6 | 30 | 21 | 21 | n/a | 0 |
| YEZHET 20 Gauge | 9.6 | 30 | 20 | 21 | n/a | 0 |
| Modacraft 18 Gauge | 9.6 | 29 | 21 | 20 | n/a | 0 |
| Mangolite 16 Gauge | 9.5 | 28 | 20 | 19 | n/a | 0 |
Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total. Machines with a power supply, and items whose listing mentions safety features, are judged on safety; other items use a 90-point scale.
The 6-roll kit leads on range: six gauges in one box cover frame wire and detail wire together. The single-gauge spools follow on length and purity, with the 330 ft spool close behind the 100 ft spool on value.
FAQ: lasers and CNC
What gauge is jewelry wire?
Jewelry wire runs from heavy frame gauges to fine detail gauges: the wires here span 16 gauge to 28 gauge. A higher gauge number means a thinner wire, so 16 gauge holds bold shapes while 28 gauge coils around the smallest beads. The Therwen listing notes its size menu covers 16 gauges from 4 AWG to 34 AWG.
What size is jewelry wire?
Size means gauge and diameter together: the wires here range from 16 gauge at 1.3 mm to 24 gauge at 0.5 mm, with 20 gauge at 0.8 mm and 18 gauge at 1 mm between them. Check the gauge on the spool before starting a piece, since a wire that is too thick will not thread a bead and a wire that is too thin will not hold a frame.
What do I need to make wire jewelry?
Wire in the gauge the piece needs, plus pliers for cutting, bending and looping. The Modacraft set includes 4-in-1 pliers with a cutter, a flattener, a shaping hole and rounded needle-nose for loops. The other wires here ship on spools, so a pair of pliers from the bench covers the rest.
Can wire cutters cut jewelry wire?
Yes, with cutters made for soft wire: the Modacraft pliers include a cutter for accurate cuts on soft wires, and the Therwen wire cuts straight off the spool with regular pliers. Cut ends can be sharp, so wear gloves or handle cut pieces carefully.
Does copper wire tarnish?
Bare copper darkens into a natural patina with air exposure, which the listings describe as a normal property of raw copper rather than a defect. The Modacraft wire has a transparent protective layer that resists oxidation and fading, and the Mangolite wire ships with a polishing cloth for keeping the finish bright.
Related: best jewelry making tools, best jewelry pliers set, best jewelry supplies, best jewelry polishing cloth and how to use crimp beads. Also see our jewelry and lapidary hub.




