Best Bracelet Blanks for Engraving (2026): 5 Picks Compared
Five bracelet blanks for engraving compared by material, size and pack count, from stainless steel cuffs to anodized aluminum strips and a slider kit.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best Value PackLewtemi Black 369.7/10View on Amazon - 2
Best Aluminum BlankABBECIAO Aluminum 259.6/10View on Amazon - 3
Best KitUNICRAFTALE Kit 89.6/10View on Amazon - 4
Best Stainless CuffHicarer Steel Cuff 189.6/10View on Amazon - 5
Best Color ChoiceLewtemi Colorful 129.6/10View on Amazon - 6
ABBECIAO 25 Pack Aluminum Bracelet Blanks for Metal StampingView on Amazon - 7
Hicarer 18 Pcs Metal Adjustable Cuff Bracelet Blanks 3/ 8 x 6View on Amazon - 8Lewtemi 24 Pcs Black Aluminum Metal Bracelet Blanks forView on Amazon
- 9Lewtemi 12 Pcs Black Aluminum Metal Bracelet Blanks forView on Amazon
- 10
Lewtemi 24 Pcs Anodized Aluminum Bracelet Blanks MetalView on Amazon
A maker wants to engrave names, dates or short words on bracelets to sell or give as gifts, and the best bracelet blanks for engraving should take a clean impression, bend to a wrist and hold up to wear. This list compares five blank packs and one kit, in stainless steel and anodized aluminum, by material, size and pack count.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Value Pack Lewtemi Black 36: 36 anodized aluminum blanks, 7 x 0.5 inches. Check price on Amazon
- Best Aluminum Blank ABBECIAO Aluminum 25: 14 gauge aluminum, deburred edges, 25 pack. Check price on Amazon
- Best Kit UNICRAFTALE Kit 8: 8 sliders, 8 tags and 40 jump rings, 304 steel. Check price on Amazon
- Best Stainless Cuff Hicarer Steel Cuff 18: 18 stainless steel adjustable cuffs, 6.3 inches. Check price on Amazon
- Best Color Choice Lewtemi Colorful 12: 12 blanks in 6 colors, 2 of each, 7 inches. Check price on Amazon
Machines on the list
Lewtemi 36 Pcs Black Aluminum Metal Bracelet
Anodized aluminum blanks in black, with round corners and smooth edges, for stamping and engraving.
Pros
- 36 pieces, the largest pack here
- Anodized aluminum, listed as hard to fade or oxidize
- Round corner design, smooth on the edge without burr
- Bendable cuff, easy to stamp, engrave and bend
Cons
- Black only, with no color choice stated
- Spec table lists different dimensions than the title and bullets
- No warranty term stated
- One length to bend to fit the wrist
ABBECIAO 25 Pack Aluminum Bracelet Blanks
Aluminum blanks with deburred edges and a protective film, for stamping and engraving.
Pros
- 14 gauge, 1.6 mm thick aluminum
- Deburred smooth edges
- Blue protective film on both sides
- 25 pieces with rounded ends
Cons
- Silver only, with no color choice stated
- Narrower than the 0.5 inch strips here, at 3/8 inch wide
- No warranty term stated
- Blanks only, with no findings included
UNICRAFTALE 2 Colors 8 Sets Engravable DIY
A kit of slider bracelets, rectangle tags and jump rings in 304 stainless steel, for engraved bracelets.
Pros
- Complete kit: 8 sliders, 8 tags and 40 jump rings
- 304 stainless steel, listed as never tarnishing or changing color
- Adjustable slider stopper to fit the wrist
- 2 colors, 4 pieces of each color
Cons
- Only 8 bracelets per kit, the fewest here
- Rectangle tags only, with no other tag shape stated
- No warranty term stated
- Tags must be strung on the sliders to finish each bracelet
Hicarer 18 Pcs Stainless Steel Adjustable Cuff
Stainless steel adjustable cuffs with a blank surface, for engraving, embossing and stamping.
Pros
- Stainless steel, listed as durable and not easy to break or fade
- Bendable and moldable while keeping its shape
- Can be hammered, inked and stamped
- 18 pieces, enough quantity for jewelry making needs
Cons
- Title gives 6 inches for length while bullets give 6.3 inches
- Narrowest blank here, at 0.2 inch wide
- One size, listed as fitting most people
- No warranty term stated
Lewtemi 12 Pcs Metal Stamping Blanks
Anodized aluminum blanks in 6 colors, with round corners, for engraving and stamping.
Pros
- 6 colors, 2 pieces of each color
- Anodized aluminum, listed as not easy to fade or oxidize
- Round corner design, smooth on the surface
- 7 x 0.5 x 0.05 inches, listed as fitting most people
Cons
- Only 12 pieces, the smallest blank pack here
- Spec table lists different dimensions than the title and bullets
- No warranty term stated
- 2 pieces per color, so repeats of one color are limited
Other machines to compare
ABBECIAO 25 Pack Aluminum Bracelet Blanks for Metal StampingCheck price on Amazon
Hicarer 18 Pcs Metal Adjustable Cuff Bracelet Blanks 3/ 8 x 6Check price on Amazon
Lewtemi 24 Pcs Black Aluminum Metal Bracelet Blanks forCheck price on Amazon- Lewtemi 12 Pcs Black Aluminum Metal Bracelet Blanks forCheck price on Amazon
Lewtemi 24 Pcs Anodized Aluminum Bracelet Blanks MetalCheck price on Amazon
Specs compared
| Blank | HQ Score | Material | Size | Pack |
|---|---|---|---|---|
| Lewtemi Black 36 | 9.7/10 | Anodized aluminum | 7 x 0.5 x 0.05 inches | 36 pieces |
| ABBECIAO Aluminum 25 | 9.6/10 | Aluminum | 3/8 x 6 inches | 25 pieces |
| UNICRAFTALE Kit 8 | 9.6/10 | 304 stainless steel | 24 cm slider | 8 sets |
| Hicarer Steel Cuff 18 | 9.6/10 | Stainless steel | 6.3 x 0.2 inches | 18 pieces |
| Lewtemi Colorful 12 | 9.6/10 | Anodized aluminum | 7 x 0.5 x 0.05 inches | 12 pieces |
Blank details as published on each listing, collected 27 October 2026.
How to choose the best bracelet blanks for engraving
Material first
Two picks are stainless steel: the Hicarer cuffs and the UNICRAFTALE kit in 304 stainless steel. Three picks are aluminum: ABBECIAO in plain aluminum and two Lewtemi packs in anodized aluminum, which the listings say is hard to fade or oxidize. Stainless suits a maker who wants a steel look and a kit with findings; anodized aluminum suits a maker who wants color and a lighter blank. See our best aluminum business card blanks for engraving for more anodized aluminum blanks.
Size and thickness
Both Lewtemi packs measure 7 x 0.5 x 0.05 inches, while the Hicarer cuff measures 6.3 inches long and 0.2 inch wide per its bullets. ABBECIAO is narrower at 3/8 inch wide and 6 inches long, with a stated thickness of 14 gauge, 1.6 mm. The UNICRAFTALE slider bracelet measures 24 cm, with a slider stopper to adjust the fit. Pick the width that fits the words and patterns planned for the blank.
Pack or kit
Pack counts run from 12 pieces for the Lewtemi colorful pack to 36 pieces for the Lewtemi black pack, with 18 Hicarer cuffs and 25 ABBECIAO blanks between them. The UNICRAFTALE kit is different: 8 slider bracelets, 8 rectangle tags and 40 jump rings, so it makes finished bracelets rather than blanks alone. See our best ring blanks for engraving for a smaller blank format.
Project Match
- Stamped name cuffs for gifts: ABBECIAO 25 and Hicarer 18, both listed for stamping and engraving names, dates and short words.
- Black engraved bracelets: Lewtemi black 36, anodized aluminum with round corners and smooth edges.
- Colorful bracelets for varied gifts: Lewtemi colorful 12, with 6 colors and 2 pieces of each color.
- Finished slider bracelets with engraved tags: UNICRAFTALE kit, with sliders, tags and jump rings included.
- Laser settings for any blank: Not stated on any listing here.
How the scores add up
The HQ Score weighs performance, build, value, safety and warranty. No listing here states a laser class, a safety certification or a warranty term, so safety and warranty score zero for every pick and the ranking rests on performance, build and value. How we pick explains the weights.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Lewtemi Black 36 | 9.7 | 30 | 21 | 22 | n/a | 0 |
| ABBECIAO Aluminum 25 | 9.6 | 30 | 21 | 21 | n/a | 0 |
| UNICRAFTALE Kit 8 | 9.6 | 30 | 22 | 20 | n/a | 0 |
| Hicarer Steel Cuff 18 | 9.6 | 29 | 21 | 20 | n/a | 0 |
| Lewtemi Colorful 12 | 9.6 | 29 | 21 | 20 | n/a | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score. Safety counts only for powered gear or where the listing states safety features; where it does not apply, the score is taken over the remaining 90 points.
FAQ: lasers and CNC
Can a laser engraver mark these blanks?
The UNICRAFTALE listing says to use a laser tool to engrave words on the tags, and the Lewtemi colorful listing mentions DIY laser engraving. The other listings list stamping and engraving. No listing states laser settings, so match the blank material to the machine before engraving.
What thickness do these blanks list?
ABBECIAO lists 14 gauge, 1.6 mm. Both Lewtemi packs list 0.05 inch thickness. The Hicarer and UNICRAFTALE listings state no thickness.
Do any of these come with findings?
Only the UNICRAFTALE kit includes findings: 8 slider bracelets, 8 rectangle tags and 40 open jump rings. The other four picks are blanks only.
Are these blanks adjustable?
The Hicarer cuffs bend and mold to shape, the UNICRAFTALE sliders adjust with a slider stopper, the Lewtemi blanks bend into shape, and the ABBECIAO blanks are rounded-end adjustable cuffs. All five listings describe a fit for most people rather than a sized fit.
Related: best ring blanks for engraving, best aluminum business card blanks for engraving and the engraving materials hub.
