Best Black Acrylic Sheet Under $30 (2026): 5 Picks Compared
Five black cast acrylic sheets under 30 dollars, compared by size, thickness, pack size and the uses each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallKINLINK 12×16 4-Pack9.5/10View on Amazon - 2
Best for SignsKINLINK 12×16 2-Pack9.6/10View on Amazon - 3
Best Small SheetLesnlok 8×10 2-Pack9.6/10View on Amazon - 4
Largest PackEgofine 8×10 12-Pack9.3/10View on Amazon
A dark sign panel, a display stand, a table number for a wedding table: black acrylic suits projects where the engraved mark needs to stand out against a deep, reflective surface. This guide compares the best black acrylic sheet under 30 options by sheet size, thickness, pack size and the uses each listing states, so a maker can match a sheet to the project before ordering.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall KINLINK 12×16 4-Pack: 12 x 16 inch sheets in a 4 pack, 3mm thick, with protective paper. Check price on Amazon
- Best for Signs KINLINK 12×16 2-Pack: The same 12 x 16 inch, 3mm sheet in a 2 pack, with rotary tool cutting named. Check price on Amazon
- Best Small Sheet Lesnlok 8×10 2-Pack: An 8 x 10 inch cell cast sheet with clean cut edges and a protective film. Check price on Amazon
- Largest Pack Egofine 8×10 12-Pack: A 12 pack of 8 x 10 inch sheets for small craft projects and repeated cuts. Check price on Amazon
Machines on the list

KINLINK 12x16 3mm 1/8" Black Cast Acrylic Sheets
A 12 x 16 inch black cast acrylic sheet in a 2 pack, 3mm thick, with a protective paper layer and a reflective surface that blocks light.
Pros
- 12 x 16 inch sheets in a 2 pack for larger signs and table tops
- 3mm cast acrylic with a reflective surface and 0% light transmittance stated
- Protective paper guards each sheet against scratches, stains and fingerprints
- Widest tool list here: table saw, jigsaw, drill, router, band saw, miter saw and rotary tool
Cons
- No warranty term is stated in the listing data
- No safety certification or laser rating is stated
- The listing calls the surface ultra-clear while also stating 0% light transmittance

Black Acrylic Sheet 8x10 Lesnlok 2 Pieces Black
An 8 x 10 inch black plexiglass sheet in a 2 pack, 1/8 inch thick, with a protective film and a polished, reflective surface.
Pros
- Cell cast acrylic with clean cut edges without burrs
- Sharper laser engraving and resistance to scratch and chemical solvents stated
- Protective film on each sheet, peeled off before use
- 0% light transmittance with weather resistance for indoor and outdoor use
Cons
- Smaller sheet than the 12 x 16 inch picks
- No warranty term is stated in the listing data
- No safety certification or laser rating is stated

KINLINK 12x16 3mm 1/8" Black Cast Acrylic Sheets
A 4-pack of 12 x 16 inch opaque black cast acrylic sheets with 0.13 inch thickness, zero light transmittance and protective paper masking.
Pros
- Four 12 x 16 inch cast acrylic sheets totaling 1.61 kg in weight
- Opaque black surface with stated 0% light transmittance for high-contrast engraving
- Protective paper masking on the surface protects against scratches and fingerprints
- Absorbs diode and CO2 laser wavelengths effectively for clean cutting and etching
Cons
- No warranty term is stated in the listing
- Bullets mistakenly refer to Lexan, even though polycarbonate must not be laser cut

Lesnlok 8 x 12 Black Acrylic Sheet 1/8 inch Thick
A two-pack of 8 x 12 inch 1/8-inch cell cast black acrylic sheets with 0% light transmittance and a reflective polished finish.
Pros
- Two-pack of 8 x 12 inch cell cast black acrylic sheets
- Stated 0% light transmittance gives solid opacity for high-contrast signage
- Maker says the cell cast version gives clean cut edges without burrs and sharper laser engraving
- Protective film on both sides guards the polished reflective surface
Cons
- The technical details list Frosted Black while the title and bullets describe a reflective polished surface
- The dimensions line lists 0.25 inches while the title and bullets state 1/8 inch (3 mm)
- Protective film is plastic rather than paper masking
- No warranty term is stated

Egofine 8" x 10" Black Plexiglass Sheets 12 Pack
A 12-pack of 8 x 10 in black cast plexiglass sheets at 0.04 in, with carving and drilling named in the listing.
Pros
- 12-sheet pack, the largest count here
- 0.04 in (1mm) sheets cut cleanly with a utility knife
- Smooth reflective surface with 0% transmittance
- Protective paper both sides plus corner protectors
Cons
- Thinnest sheets here, not for rigid signs
- Laser cutting not named; carving and drilling are
- No warranty term stated
- 8 x 10 in, the smallest sheet size here
Other machines to compare
KINLINK 6x12 3mm 1/8" Black Cast Acrylic Sheets Plastic BoardCheck price on Amazon
8x12 3mm 1/8" Black Cast Acrylic Sheets Plastic Board 4 PackCheck price on Amazon
Lesnlok 4x4 Black Acrylic Sheet 1/8 inch Thick 3mm 8 PiecesCheck price on Amazon
Lesnlok Black Transparent Acrylic Sheet 1/8 inch Thick 3mm 2Check price on Amazon
Pack of 10 Black Cast Acrylic Sheet 8" x 10" x 1/8" ThickCheck price on Amazon
Specs compared
| Model | HQ Score | Sheet size | Thickness | Pack | Warranty |
|---|---|---|---|---|---|
| KINLINK 12×16 4-Pack | 9.5/10 | 12 x 16 inches | 3mm | 4 | Not stated |
| KINLINK 12×16 2-Pack | 9.6/10 | 12 x 16 inches | 1/8 inch | 2 | Not stated |
| Lesnlok 8×10 2-Pack | 9.6/10 | 8 x 10 inches | 1/8 inch | 2 | Not stated |
| Lesnlok 8×12 2-Pack | 9.5/10 | 8 x 12 inches | 3mm | 2 | Not stated |
| Egofine 8×10 12-Pack | 9.3/10 | 8 x 10 inches | 0.04 inch | 12 | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 4 November 2026.
What the black acrylic listings tell you
Three listings give detail: sizes, thickness, tools and uses, plus a protective layer on each sheet. Two more listings give a title only, with size, thickness, pack size and uses but no tools, no protective layer and no warranty detail. Read the title and the bullets together: one spec table lists a thickness that differs from the title, and one listing calls a black sheet ultra-clear while also stating that its light transmittance is 0%. Where a listing contradicts itself, this guide follows the title and the bullets.
Buying guide: best black acrylic sheet under 30
Sheet size
Sizes here run from 8 x 10 inches to 12 x 16 inches. A 12 x 16 inch sheet suits larger signs, table tops and window glass pieces, while an 8 x 10 inch or 8 x 12 inch sheet suits display stands, switch panels and small craft pieces. Match the sheet to the finished piece, and leave room for clamping and for the edges the design needs.
Thickness
Most picks here are 3mm, or 1/8 inch, thick. That thickness suits engraved signs, display stands and cut parts that need to hold their shape. The Egofine pick is 0.04 inch thick, which is thinner than the 3mm picks here and suits flat craft pieces, painting surfaces and photography backdrops rather than rigid cut parts.
Cast acrylic and light blocking
The listings describe these sheets as cast acrylic with a reflective surface. The KINLINK and Lesnlok full-detail listings state a light transmittance of 0%, which the listings present as excellent light blocking. A black sheet that blocks light gives strong contrast for an engraved mark, and the reflective surface suits photography backdrops and display work.
Cutting and engraving
The full-detail listings name a table saw, jigsaw, drill, router or band saw for cutting, and the KINLINK listing also names a rotary tool and a miter saw. The KINLINK listing states that its sheets work with laser cutters and that laser engraving causes no melting, burning or scorching, which is the maker claim. Cut a spare offcut with the same settings before committing to a finished piece, and keep the protective paper or film on the sheet until the work is done.
Pack size
Pack sizes here are 2, 4 and 12. A 2 pack suits a single project or a pair of matching pieces. A 4 pack suits repeated signs or a small run of table numbers. A 12 pack suits small craft pieces and practice cuts, where having spare sheets matters more than sheet size.
Ventilate the workspace when cutting or engraving acrylic, stay with the machine while it runs, and keep a fire watch routine for laser work. Peel the protective layer only when the piece is ready, and keep hands clear of moving blades and bits.
Project Match
- Engraved signs and table numbers: the KINLINK 12 x 16 inch picks, which name signs, table numbers and invitations among their uses.
- Display stands and switch panels: the Lesnlok picks, which name display stands and switch panels among their uses.
- Photography backdrops and wall art: the KINLINK picks, which name photography backdrops and wall art among their uses.
- Small craft pieces and repeated cuts: the Egofine 12 pack, which names DIY craft projects and home decor among its uses.
- Painting surfaces and home decor: the Lesnlok 8 x 12 inch pick and the Egofine pick, which both name painting and home decor among their uses.
How the scores add up
Each sheet is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. Safety points come from named features such as a stated laser rating or a stated certification; none of the listings here name one, so no safety points are awarded across the picks. No listing states a warranty term, so no warranty points are awarded either.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| KINLINK 12×16 2-Pack | 9.6 | 30 | 21 | 21 | n/a | 0 |
| Lesnlok 8×10 2-Pack | 9.6 | 29 | 20 | 20 | n/a | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.
FAQ: lasers and CNC
Can a laser cut black acrylic sheets?
The KINLINK listings state that their sheets work with laser cutters and with laser engraving, and the Lesnlok 8 x 10 inch listing states sharper laser engraving. The two title-only listings do not name laser cutting in the data given, so check the listing for the sheet being ordered before planning a laser cut.
What thickness suits an engraved sign?
The 3mm, or 1/8 inch, picks here suit engraved signs, display stands and cut parts that need to hold their shape. The 0.04 inch Egofine pick is thinner and suits flat craft pieces rather than rigid signs.
Do the sheets come with a protective layer?
The KINLINK listings state a protective paper on each sheet, and the Lesnlok 8 x 10 inch listing states a protective film. The two title-only listings do not state a protective layer, so peel directions are not given for those picks.
What size sheet suits a display stand?
The Lesnlok listings name display stands among their uses, in 8 x 10 inch and 8 x 12 inch sizes. A 12 x 16 inch sheet suits larger signs and table tops instead.
Can these sheets be cut with common workshop tools?
The full-detail listings name a table saw, jigsaw, drill, router or band saw, and the KINLINK listing also names a rotary tool and a miter saw. The title-only listings name no cutting tools, so no tool guidance is given for those picks.
Related: best black acrylic sheet, best acrylic sheets for laser cutting, best acrylic for laser engraved signs, best acrylic sheet under 20, best acrylic for laser cut boxes and the engraving materials hub.




