Best Bead Router Bit (2026)
5 bullnose and beading router bits compared by bead radius, shank, cutters, bearing and warranty for shelf and furniture edges.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallFreud 80-104 Beading9.6/10View on Amazon - 2
Best Small BeadFreud 80-102 Beading9.6/10View on Amazon - 3
Best SetWSOOX 5-Piece Set9.5/10View on Amazon - 4
Best Large BeadYonico 13118 Bullnose9.4/10View on Amazon
A bead along the edge of a shelf or table top turns a plain board into finished furniture. A bullnose bead rounds the edge into a half-round profile, while a traditional beading bit cuts a half-round bead with a square shoulder. This guide compares the best bead router bit on the details that decide the profile: the bead radius, the shank, the cutters and the bearing.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Freud 80-104 Beading: A 3/16 in. radius beading bit with a 1/2 in. bearing, 2 cutters, Perma-SHIELD coating and a limited lifetime warranty. Check price on Amazon
- Best Small Bead Freud 80-102 Beading: A 1/8 in. radius beading bit with the same 2-cutter build, Perma-SHIELD coating and lifetime warranty. Check price on Amazon
- Best Set WSOOX 5-Piece Set: 5 bullnose radii from 1/4 in. to 3/4 in. on 1/4 in. shanks for CNC, table and handheld routers. Check price on Amazon
- Best Large Bead Yonico 13118 Bullnose: A 1 in. bullnose bead with a 1/2 in. radius and a 1/2 in. shank for furniture top edges. Check price on Amazon
Machines on the list

Freud 80-104: 3/16" Radius Traditional Beading Bit
A 3/16 in. radius traditional beading bit with a 1/4 in. shank, a 1/2 in. bearing and 2 cutters, covered by a limited lifetime warranty.
Pros
- 3/16 in. radius mills a half-round bead with a square shoulder
- 2 cutters with a 1/2 in. bearing for a guided edge cut
- Perma-SHIELD coating and a kickback reducing design
- Limited lifetime warranty from Freud
Cons
- 1/4 in. shank only, no 1/2 in. shank version in this listing
- 3/16 in. radius only, no other bead sizes in this listing
- Materials stated are wood and composites only

Freud 80-102: 1/8" Radius Traditional Beading Bit
A 1/8 in. radius traditional beading bit with a 1/4 in. shank, a 1/2 in. bearing and 2 cutters, covered by a limited lifetime warranty.
Pros
- 1/8 in. radius mills a fine half-round bead with a square shoulder
- 2 cutters with a 1/2 in. bearing for a guided edge cut
- Perma-SHIELD coating and a kickback reducing design
- Limited lifetime warranty from Freud
Cons
- 1/4 in. shank only, no 1/2 in. shank version in this listing
- 1/8 in. radius only, no other bead sizes in this listing
- Materials stated are wood and composites only

WSOOX 5PCS Bullnose Beading Router Bits
A 5-piece bullnose beading set with radii from 1/4 in. to 3/4 in., 1/4 in. shanks and carbide-tipped cutters for CNC, table and handheld routers.
Pros
- 5 radii from 1/4 in. to 3/4 in. cover small and large beads
- Solid hardened steel bodies with an anti-kickback design
- Works on CNC and other automatic routers as well as handheld and table-mounted routers
- Carbide-tipped cutters with high abrasion resistance
Cons
- No warranty term is stated in the listing
- Wood and wood panels only; the listing warns against cutting metal
- Multiple passes are recommended for a larger bit or hardwood

YONICO Router Bits Bullnose 1-Inch Bead 1/2-Inch
A 1 in. bullnose bit with a 1/2 in. radius, a 1/4 in. fillet above and below the profile, and a 1/2 in. shank for table and handheld routers.
Pros
- 1 in. bullnose bead with a 1/2 in. radius for large furniture edges
- 1/4 in. fillet above and below the profile
- C3 micro-grain tungsten carbide blades for a sharper, longer lasting edge
- Silver induction brazing for strength and durability
Cons
- No bearing is stated in the listing
- No warranty term is stated in the listing
- 1/2 in. shank, so the router needs a 1/2 in. collet
- No cutter count is stated in the listing

YONICO Bullnose Beading Router Bits 1/4-Inch Bead
A 1/4 in. bead bullnose bit with a 1/8 in. radius, 2 flute carbide cutters and a 1/4 in. shank for table and handheld routers.
Pros
- 1/4 in. bead with a 1/8 in. radius for small bullnose edges
- 2 flute carbide cutters with C3 micro-grain tungsten carbide blades
- 1/4 in. shank fits table mount and handheld routers
- Silver induction brazing for strength and durability
Cons
- No bearing is stated in the listing
- No warranty term is stated in the listing
- 1/4 in. bead only, no other bead sizes in this listing
- No fillet is stated above or below the profile
Other machines to compare
BINSTAK 1/8" Radius Insert Roundover Router Bit 1/4" ShankCheck price on Amazon
KATUR Classical Roman Ogee Edge Forming Router Bit 1/4 InchCheck price on Amazon
YONICO 13201q 1/4-Inch Bead 2 Bit Canoe Joint Router Bit SetCheck price on Amazon
Akylin Triple Beading Router Bit SetCheck price on Amazon
5Pcs Classical Ogee BitCheck price on Amazon
Specs compared
| Model | HQ Score | Bead radius | Shank | Cutters | Warranty |
|---|---|---|---|---|---|
| Freud 80-104 Beading | 9.6/10 | 3/16 in. | 1/4 in. | 2 cutters | Limited lifetime |
| Freud 80-102 Beading | 9.6/10 | 1/8 in. | 1/4 in. | 2 cutters | Limited lifetime |
| WSOOX 5-Piece Set | 9.5/10 | 1/4 to 3/4 in. | 1/4 in. | Not stated | Not stated |
| Yonico 13118 Bullnose | 9.4/10 | 1 in. bead | 1/2 in. | Not stated | Not stated |
| Yonico 13191q Bullnose | 9.4/10 | 1/4 in. bead | 1/4 in. | 2 flute | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 11 November 2026.
How the picks were scored
Each bit earns an HQ Score from performance, build, value, safety and warranty, with the weights published on the How We Pick page. Safety points need named safety features, and the Freud bits state a kickback reducing design while the WSOOX set states an anti-kickback design. Warranty points need a stated term, and the two Freud bits state a limited lifetime warranty.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Freud 80-104 Beading | 9.6 | 30 | 22 | 20 | 3 | 4 |
| Freud 80-102 Beading | 9.6 | 29 | 22 | 20 | 3 | 4 |
| WSOOX 5-Piece Set | 9.5 | 28 | 20 | 22 | 3 | 0 |
| Yonico 13118 Bullnose | 9.4 | 29 | 21 | 19 | 0 | 0 |
| Yonico 13191q Bullnose | 9.4 | 27 | 20 | 19 | 0 | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.
What the router bit listings tell you
Bead radii in this guide run from 1/8 in. to 1 in., with the WSOOX set covering 5 radii from 1/4 in. to 3/4 in. on 1/4 in. shanks. Only the Yonico 13118 uses a 1/2 in. shank; the other 4 bits use 1/4 in. shanks. Two listings state a warranty term, both Freud limited lifetime warranties, and the other 3 state none. Read the radius, the shank and the bearing before the pack count.
How to pick the best bead router bit
Bead radius and profile
A bullnose bit cuts a half-round bead across the full edge, while a traditional beading bit mills a half-round bead with a square shoulder. Radii here run from 1/8 in. on the Freud 80-102 to 1 in. on the Yonico 13118, with a 1/4 in. fillet above and below the profile on the Yonico 13118. The WSOOX set covers 5 radii from 1/4 in. to 3/4 in. in one set. Match the radius to the edge thickness before ordering.
Shank size
4 bits in this guide use a 1/4 in. shank, and the Yonico 13118 uses a 1/2 in. shank. A 1/4 in. shank fits table mount and handheld routers, and the listings state table and handheld use for the Yonico bits and the Freud bits. The WSOOX set also states use on CNC and other automatic routers. Match the shank to the collet before ordering.
Cutters and coating
Two flute carbide cutters appear on the Yonico 13191q and the Freud bits state 2 cutters each. The Yonico bits use C3 micro-grain tungsten carbide blades joined by silver induction brazing. The Freud bits add a Perma-SHIELD coating and a kickback reducing design, and the WSOOX set uses carbide-tipped cutters on solid hardened steel bodies with an anti-kickback design. Read the cutter and coating details before the brand name.
One bit or a set
A set covers several radii with one purchase, and the WSOOX set holds 5 radii from 1/4 in. to 3/4 in. One bit suits a maker who cuts one bead size often, and the Freud bits suit a maker who wants a stated lifetime warranty with a guided cut. The Yonico 13118 suits a maker who wants the largest bead here. Count the bead sizes you cut most before choosing between a set and one bit.
Wear eye and hearing protection, clamp the workpiece, and keep hands clear of a spinning bit. Make multiple passes on a large bit or hardwood, and stay with the router while it cuts.
Project Match
- Shelf and table top edges: the Yonico 13118 and 13191q, the WSOOX set and both Freud bits all list shelves and table tops as the working edge.
- Flooring and wainscot paneling: the WSOOX set, which lists flooring and wainscot paneling among its uses.
- Furniture top surfaces: the Yonico bits, which list any furniture top surface as the working edge.
- Fine beads on small edges: the Freud 80-102 with a 1/8 in. radius and the Yonico 13191q with a 1/4 in. bead.
- Hardwood, softwood, plywood and composites: the Freud bits, which list all 4 materials.
FAQ: lasers and CNC
What is the difference between a bullnose bit and a beading bit?
A bullnose bit cuts a half-round bead across the full edge, as the Yonico 13118 does with a 1 in. bead and a 1/2 in. radius. A traditional beading bit mills a half-round bead with a square shoulder, as the Freud bits do at 3/16 in. and 1/8 in. radius.
Which bead radius should I choose for a shelf edge?
Match the radius to the edge. The WSOOX set covers 5 radii from 1/4 in. to 3/4 in., the Freud 80-104 cuts a 3/16 in. radius, and the Freud 80-102 cuts a 1/8 in. radius for fine edges.
Do any of these router bits state a warranty?
Yes, the two Freud bits. Both state a limited lifetime warranty. The Yonico bits and the WSOOX set state no warranty term.
Can the WSOOX set cut metal?
No. The listing states wood and wood panels only and warns against cutting non-wood products such as metal. Use it on woods, MDF, particle boards, plywood, panels, softwood and hardwood.
Related: best 1/2 inch roundover router bit, roundover bit vs cove bit, best router bit for beginners and router bit set vs individual router bits. Also see our best carbide tip router bit set. Also see our bead router cutter. Also see our 1/4 vs 1/2 shank router bits.




