Best Acrylic for Laser Engraved Photos Under $10 (2026)
Five acrylic sheet packs under $10 compared by sheet size, thickness, cast material and stated laser support, for laser engraved photos.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallDuco 6×12 Cast Acrylic9.5/10View on Amazon - 2
Small Photo PickDuco 4×6 Cast Acrylic9.5/10View on Amazon - 3
Mid-Size PickKAITELA 5×7 Cast9.4/10View on Amazon - 4
Largest SheetEgofine 8.5×11 Film9.4/10View on Amazon - 5
Most PiecesEgofine 4×6 Film9.3/10View on Amazon - 6
Translucent Green Acrylic Sheets 8*12 inch 1/8" ThickView on Amazon - 7
Pink Acrylic Sheets 8 * 12 inch 1/8" ThickView on Amazon - 8
1/8 Thick 10 x 10 inch Translucent Acrylic SheetsView on Amazon - 9
Glitter Acrylic Sheets BulkView on Amazon - 10
Acrylic Sheets BulkView on Amazon
An engraved photo on clear acrylic catches the light in a way paper never does: the portrait floats inside the sheet, edged in frosted white. Makers sell them as anniversary gifts, memorial pieces and pet portraits, and the material cost stays low. This guide compares five acrylic sheet packs for the job and names the best acrylic for laser engraved photos under 10 by sheet size, thickness, cast material and stated laser support.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Duco 6×12 Cast Acrylic: 1/8 in cast acrylic at 6×12 in, laser engraving named, paper masks both sides. Check price on Amazon
- Small Photo Pick Duco 4×6 Cast Acrylic: 1/8 in cast acrylic at 4×6 in, 4 sheets, laser engraving named, paper masks. Check price on Amazon
- Mid-Size Pick KAITELA 5×7 Cast: 5×7 in cast acrylic at 1/8 in, laser cutting and engraving named, 0.16 kg. Check price on Amazon
- Largest Sheet Egofine 8.5×11 Film: 8.5×11 inch acrylic film at 0.04 inch, 6 sheets with protective film on both sides. Check price on Amazon
- Most Pieces Egofine 4×6 Film: 12 sheets of 4×6 inch acrylic film at 0.04 inch with protective film masking. Check price on Amazon
Machines on the list
Duco 1/8" Clear Cast Acrylic Sheets
A 2-pack of 1/8 inch cast acrylic sheets at 6x12 inches, with laser cutting and engraving named in the listing and protective paper masks on both sides.
Pros
- 1/8 inch cast acrylic with laser engraving named in the title and bullets
- 6x12 inch sheets, the largest work area here
- Protective paper mask on both sides, per the listing
- UV-stable, weather resistant and shatter-resistant, per the listing
Cons
- Spec table lists 0.12 inch thickness while the title, bullets and dimensions say 1/8 inch (0.13 inches)
- Only 2 sheets in the pack
- No weight is stated
- No warranty term is stated
Duco 1/8" Clear Cast Acrylic Sheets
A 4-pack of 1/8 inch cast acrylic sheets at 4x6 inches, with laser cutting and engraving named and protective paper masks on both sides.
Pros
- 1/8 inch cast acrylic with laser engraving named in the title and bullets
- 4 sheets per pack, more pieces than the 6x12
- Protective paper mask on both sides, per the listing
- UV-stable, weather resistant and shatter-resistant, per the listing
Cons
- Bullets call the sheets 3mm while the title and dimensions say 1/8 inch (0.13 inches)
- 4x6 inches fits small photos only
- Cut tolerance of plus or minus 1/8 inch, per the listing
- No warranty term is stated
Clear Cast Acrylic Sheet 5" x 7" x 1/8" Thick
A 2-pack of 5x7 inch cast acrylic sheets at 1/8 inch (0.118 in / 3mm nominal), with laser cutting and engraving named and a stated weight of 0.16 kg.
Pros
- 5x7 inch size suits standard photo prints
- Cast acrylic with laser cutting and engraving named in the bullets
- Stated weight of 0.16 kg, the only weight here
- Clean laser-cut edges with no chips, per the listing
Cons
- Only 2 sheets in the pack
- Thickness stated three ways: 1/8 inch, 0.118 in / 3mm nominal and 0.12 inches
- Bullets use odd no melting point wording around laser safety
- No warranty term is stated
Egofine Plexiglass Sheets Acrylic Sheets 6 Pack
A 6-pack of 8.5x11 inch acrylic sheets at 0.04 inch thick, with protective film masking on both sides and a stated size of 27.9x21.5cm.
Pros
- 8.5x11 inch sheets, the largest sheet size here
- 6 sheets per pack
- Protective film masking on both sides, per the listing
- Shatter resistant with clean cut edges, per the listing
Cons
- Only 0.04 inch thick, film rather than a rigid sheet
- Listing calls the sheets both cast and PET in different bullets
- Spec table material spelled Acryllic
- No warranty term is stated
Egofine Plexiglass Sheets Acrylic Sheets 12 Pack
A 12-pack of 4x6 inch acrylic sheets at 0.04 inch thick, with protective film masking on both sides, sized 10 x 15 cm.
Pros
- 12 sheets per pack, the most pieces here
- 4x6 inch size matches small photo prints
- Protective film masking on both sides, per the listing
- Shatter resistant with clean cut edges, per the listing
Cons
- Only 0.04 inch thick, film rather than a rigid sheet
- Listing calls the sheets both cast and PET in different bullets
- Smallest sheet size here
- No warranty term is stated
Other machines to compare
Translucent Green Acrylic Sheets 8*12 inch 1/8" ThickCheck price on Amazon
Pink Acrylic Sheets 8 * 12 inch 1/8" ThickCheck price on Amazon
1/8 Thick 10 x 10 inch Translucent Acrylic SheetsCheck price on Amazon
Glitter Acrylic Sheets BulkCheck price on Amazon
Acrylic Sheets BulkCheck price on Amazon
Specs compared
| Model | HQ Score | Sheet size | Thickness | Pieces | Laser engraving named | Material stated |
|---|---|---|---|---|---|---|
| Duco 6×12 Cast Acrylic | 9.5/10 | 6×12 in | 1/8 in | 2 | Yes | Cast acrylic |
| Duco 4×6 Cast Acrylic | 9.5/10 | 4×6 in | 1/8 in | 4 | Yes | Cast acrylic |
| KAITELA 5×7 Cast | 9.4/10 | 5×7 in | 1/8 in (0.118 in / 3mm nominal) | 2 | Yes | Cast acrylic |
| Egofine 8.5×11 Film | 9.4/10 | 8.5×11 in | 0.04 in | 6 | Not stated | Cast in title, PET in bullets |
| Egofine 4×6 Film | 9.3/10 | 4×6 in | 0.04 in | 12 | Not stated | Cast in title, PET in bullets |
Specifications are manufacturer rated, as published on each listing and collected 23 October 2026.
What the acrylic listings tell you
Two listings name laser cutting and engraving in the title, both from Duco, and a third names it in the bullets. The two Duco packs and the KAITELA pack state cast acrylic at 1/8 inch, while the two Egofine packs state 0.04 inch film and call the material cast in one place and PET in another. One listing states a weight, 0.16 kg. None of the five states a warranty term, and none states a safety certification.
Buying guide: best acrylic for laser engraved photos under 10
Cast acrylic for photo detail
Cast acrylic engraves with a frosted, high-contrast mark that suits photos, and three packs here state cast acrylic: the two Duco packs and the KAITELA. The two Egofine packs say cast in the title but PET in the bullets, so treat their material as uncertain. For a photo that reads clearly, pick a pack whose listing commits to cast.
Thickness: 1/8 inch or film
Three packs state 1/8 inch sheets: both Duco packs and the KAITELA at 0.118 in / 3mm nominal. A 1/8 inch sheet feels rigid in the hand and takes a deeper mark. The Egofine packs are 0.04 inch film, thin enough to flex, better for flat photo frames than for deep engraving.
Sheet size for photo prints
Match the sheet to the print. The Duco 6×12 fits larger portraits with a border, the KAITELA 5×7 matches a standard 5×7 print, and the Duco 4×6 and Egofine 4×6 suit small photos. The Egofine 8.5×11 covers poster-size work in thin film. Count the sheets too: packs here hold 2, 4, 6 or 12 pieces.
Protective film and finishing
Every pack here ships masked: protective film on the Egofine sheets, protective paper on the Duco and KAITELA sheets, both sides. Leave the masking on while you handle the sheet, peel it after engraving, and the surface stays clear. The KAITELA listing says to remove the paper before use.
Ventilation for acrylic engraving
Laser engraving acrylic makes fumes, so run ventilation or a fume extractor while the job runs. The KAITELA listing states clean laser-cut edges with no chips and no melting point issues during laser cutting or engraving.
Project Match
- Large photo portraits: the Duco 6×12, the biggest 1/8 inch sheet here.
- Standard 5×7 prints: the KAITELA 5×7, sized to the print.
- Small photo gifts: the Duco 4×6, rigid 1/8 inch stock in a 4-pack.
- Poster frames and displays: the Egofine 8.5×11, the largest sheet size in thin stock.
- A dozen small prints: the Egofine 4×6, 12 sheets per pack.
How the scores add up
Each pack is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. For engraving materials, performance covers cast material, thickness and stated laser support. None of the five listings states a safety certification or a warranty term, so those scores sit at zero and the ranking comes from the other three.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Duco 6×12 Cast Acrylic | 9.5 | 30 | 21 | 20 | 0 | 0 |
| Duco 4×6 Cast Acrylic | 9.5 | 29 | 21 | 20 | 0 | 0 |
| KAITELA 5×7 Cast | 9.4 | 28 | 20 | 20 | 0 | 0 |
| Egofine 8.5×11 Film | 9.4 | 27 | 19 | 19 | 0 | 0 |
| Egofine 4×6 Film | 9.3 | 26 | 19 | 19 | 0 | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
FAQ: lasers and CNC
What thickness of acrylic is good for laser engraved photos?
The 1/8 inch sheets here, from Duco and KAITELA, give a rigid photo panel. The 0.04 inch Egofine sheets are thin film, better for flat frames. Pick the thickness that matches how the finished piece will be displayed.
Is cast acrylic better for laser engraved photos?
Cast acrylic is the usual choice for photo engraving because it marks with a frosted contrast. Three packs here state cast acrylic; the two Egofine packs say cast in the title and PET in the bullets, so their material is uncertain.
Can these sheets be cut to size?
The Egofine listings say the sheets cut with a table saw, miter saw, jigsaw, drill or knife. The Duco listings say the panels can be sawn, routed and drilled. The KAITELA listing names laser, table saw, jigsaw, drill, CNC router and circular saw.
Do the sheets come with protective film?
Yes. The Egofine packs ship with protective film masking on both sides, and the Duco and KAITELA packs with protective paper on both sides. Remove it after engraving for a clear finish.
What size sheet do I need for a 5×7 photo?
The KAITELA pack holds 5×7 inch sheets, a direct match. The Duco 6×12 and Egofine 8.5×11 leave a border around the print, while the 4×6 sheets suit smaller photos.
Related: best acrylic for laser cut boxes under 10, best acrylic for laser engraved photos and best acrylic for laser cut boxes.
