Best Blank Metal Wallet Cards for Laser Engraving (2026): 5 Aluminum and Steel Picks
Aluminum and stainless steel wallet cards compared by material, size, thickness, finish, and pack, from what each listing states.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallLyksgir 304 Steel Cards9.5/10View on Amazon - 2
Best ValueZSMKJIAYE 500 Black Cards9.5/10View on Amazon - 3
Best Matte Finishweparmeety Black 0.45mm Cards9.5/10View on Amazon - 4
Best for ContrastOskal Glossy Black Cards9.4/10View on Amazon - 5
weparmeety 100Pcs 0.45 Metal Business Cards Aluminum LaserView on Amazon - 6
500 Pcs Metal Business Card BlanksView on Amazon - 7
LOSYHU 100PCS Metal Business Card Blanks 0.45mm ThicknessView on Amazon - 8
Cloudray 100PCS Blank Metal Business CardsView on Amazon - 9
100 Pack Blank Metal Business CardsView on Amazon
A blank metal card gives a small business a durable way to hand over contact details, a membership pass, or a gift token that survives daily wallet carry. The best blank metal wallet cards for laser engraving share a wallet shape, a flat blank face, and a coating or metal surface that takes a crisp mark from a laser, so a logo, a name, or a QR code stays readable after months of handling. This roundup compares aluminum and stainless steel blanks, in matte and glossy finishes, sold as laser engraved credit cards and business card blanks, and ranks them by what each listing actually states about material, size, thickness, and pack.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Lyksgir 304 Steel Cards: 304 stainless steel, 0.5 mm thickness, and blank surfaces on both sides for business, VIP, and gift cards. Check price on Amazon
- Best Value ZSMKJIAYE 500 Black Cards: 500 black aluminum blanks with a glossy, easy-to-engrave surface for bulk runs and festive crafts. Check price on Amazon
- Best Matte Finish weparmeety Black 0.45mm Cards: Matte black anodized aluminum with a frosted, fingerprint-resistant surface and rounded corners. Check price on Amazon
- Best for Contrast Oskal Glossy Black Cards: Glossy black coating that reveals bright silver metal, with engraving on both sides. Check price on Amazon
Machines on the list
50 Pcs 304 Stainless Steel Metal Business Cards
A 50 pack of 304 stainless steel blanks, 3.39 x 2.13 inches with 0.5 mm thickness, blank on both sides for engraving or etching.
Pros
- 304 stainless steel resists bending, warping, and corrosion
- 0.5 mm thickness gives a sturdy feel for frequent handling
- Blank surfaces on both sides for detailed designs, text, logos, and artwork
- Suits business cards, VIP membership cards, nameplates, table cards, and gift tags
Cons
- No safety certification is stated
- No concrete warranty term is stated
- 50 pack is the smallest pack in this roundup, so bulk runs need repeat orders
- Polished silver finish only, with no black coating for high-contrast coated marks
weparmeety 100Pcs 0.45 Metal Business Cards
A 100 pack of matte black anodized aluminum blanks, 86 x 54 mm with 0.45 mm thickness, rounded corners and a frosted surface for laser engraving.
Pros
- Matte black anodized aluminum with a frosted, fingerprint-resistant surface
- 86 x 54 mm wallet size with rounded corners and a smooth surface
- Sturdy aluminum described as not easy to bend, for business, VIP, plaque, and gift cards
- 100 pack suits a business card run with spares for re-runs
Cons
- No safety certification is stated
- No concrete warranty term is stated
- Matte finish gives less contrast than a glossy black coating that reveals bright metal
- Aluminum is thinner and lighter than the stainless steel card in this roundup
500 Pcs Metal Business Card Blanks
A 500 pack of black aluminum blanks, 3.4 x 2.13 inches with 0.01 inch thickness, glossy surface, for CNC and laser engraving machines.
Pros
- 500 pack is the largest pack in this roundup, for bulk runs and festive crafts
- Glossy surface described as easy to engrave, for logos, contact details, and creative designs
- Aluminum described as resistant to fading and scratching, for a lasting professional look
- Suits gift cards, thank-you cards, poker cards, and decorative festive pieces
Cons
- Spec table thickness figure disagrees with the title and bullets; this guide follows the title and bullets
- No safety certification is stated
- No concrete warranty term is stated
- No stated compatibility with a particular laser type; the listing says CNC and laser engraving machines generally
weparmeety 100 Pcs Metal Business Cards Aluminum
A 100 pack of red aluminum blanks, 86 x 54 mm with 0.21 mm thickness, frosted surface and rounded corners for laser engraving.
Pros
- Red color option for cards that stand out from black blanks
- 86 x 54 mm wallet size with rounded corners and a smooth surface
- Frosted surface described as resistant to fingerprints and scratches from normal wear
- Sturdy aluminum described as not easy to bend, for VIP, plaque, and gift cards
Cons
- Spec table warranty description of 1 states no unit, so no concrete warranty term is counted
- No safety certification is stated
- 0.21 mm thin blank is lighter and more flexible than the thicker cards in this roundup
- Red finish suits bold designs more than a restrained business look
100 Pcs Black Metal Business Card Blanks for Laser
A 100 pack of glossy black aluminum blanks, 3.4 x 2.1 inches, thin and flexible, with a coating the laser removes to reveal bright silver metal.
Pros
- Glossy black coating reveals bright silver metal for a crisp, permanent mark
- Thin, flexible aluminum fits any card holder or wallet
- Engraving on both sides for logos, QR codes, and text
- Care notes included: store flat, lift apart rather than sliding, and wipe with alcohol after engraving
Cons
- Spec table thickness figure disagrees with the title and bullets; this guide follows the title and bullets
- No safety certification is stated
- No concrete warranty term is stated
- Glossy finish needs careful handling to keep the coating fine
Other machines to compare
weparmeety 100Pcs 0.45 Metal Business Cards Aluminum LaserCheck price on Amazon
500 Pcs Metal Business Card BlanksCheck price on Amazon
LOSYHU 100PCS Metal Business Card Blanks 0.45mm ThicknessCheck price on Amazon
Cloudray 100PCS Blank Metal Business CardsCheck price on Amazon
100 Pack Blank Metal Business CardsCheck price on Amazon
Specs compared
| Card | HQ Score | Material | Size | Thickness | Pack | Finish | Sides |
|---|---|---|---|---|---|---|---|
| Lyksgir 304 Steel Cards | 9.5/10 | 304 stainless steel | 3.39 x 2.13 inches | 0.5 mm | 50 | Polished silver | Both sides |
| weparmeety Black 0.45mm Cards | 9.5/10 | Aluminum | 86 x 54 mm | 0.45 mm | 100 | Matte black | Not stated |
| ZSMKJIAYE 500 Black Cards | 9.5/10 | Aluminum | 3.4 x 2.13 inches | 0.01 inch | 500 | Glossy black | Not stated |
| weparmeety Red 0.21mm Cards | 9.4/10 | Aluminum | 86 x 54 mm | 0.21 mm | 100 | Red frosted | Not stated |
| Oskal Glossy Black Cards | 9.4/10 | Aluminum | 3.4 x 2.1 inches | 0.008 inch | 100 | Glossy black | Both sides |
Specifications are manufacturer rated, as published on each listing and collected 29 October 2026. Card size is the blank size each listing states, and thickness is the figure the listing title and bullets state where the spec table differs.
What the listings tell you, and what they leave out
The listings agree on wallet size but differ on thickness, finish, and pack size, and none of them states a safety certification or a concrete warranty term. The aluminum blanks range from thin, flexible sheets to a thicker matte black card, while the stainless steel blank is the thickest card in this roundup and the sole card made from 304 stainless steel.
A few listings also disagree with their own spec tables on thickness. The Oskal and ZSMKJIAYE titles and bullets describe thin cards, while their spec tables list a larger thickness figure, so this guide follows the title and bullets and notes the mismatch in each review.
Buying guide: best blank metal wallet cards for laser engraving
Thickness and feel
Thickness decides how a card feels in a wallet and how it handles bending. The listings here span 0.21 mm and 0.2 mm thin aluminum, a 0.45 mm matte black aluminum card, and a 0.5 mm stainless steel card. The stainless steel listing describes resistance to bending, warping, and corrosion, while the thin aluminum listings describe light, flexible cards that fit a card holder or wallet. A thicker card suits a keepsake or a VIP card that gets handled often; a thin card suits a large run where low bulk matters.
Matte or glossy finish
Finish decides how the mark reads. The matte black weparmeety card has a frosted surface the listing describes as resistant to fingerprints and scratches from normal wear, and the glossy Oskal and ZSMKJIAYE cards reveal bright silver metal where the laser removes the black coating. Matte hides handling marks; glossy gives high contrast between the black coating and the bright mark. The red weparmeety card also has a frosted surface, so color choice is about look, not only about contrast.
Pack size and spares
Pack size runs from 50 to 500 across these listings, so match the pack to the run. A 50 pack suits a small batch of gift tags or nameplates, a 100 pack suits a business card reorder, and a 500 pack suits a shop that engraves cards in bulk. Spares matter for alignment and for re-runs, so keep blanks aside beyond the count the job needs.
What a card blank will not do
A blank card is a flat marking surface, not a machine accessory that adds power or focus to a laser, and none of these listings states a coating rated for outdoor signage or a magnetic stripe. Cards with a black coating mark by removing the coating to reveal metal beneath, while the stainless steel blank marks as bare metal. For eye protection and workshop setup, see our laser safety glasses guide.
Project Match
- Business cards and contact cards: any of the picks, since every listing describes a wallet-size blank for logos, names, and contact details.
- VIP and membership cards: the Oskal glossy black card and the weparmeety matte black card, both described for VIP and membership use.
- Gift tags and thank-you cards: the ZSMKJIAYE pack and the Lyksgir stainless steel card, both described for gift cards and commemorative items.
- Nameplates, table cards, and plaques: the weparmeety cards, described for name cards, table number cards, and plaques.
- Poker cards and festive crafts: the ZSMKJIAYE blanks, described for poker cards and festive handicrafts.
Uses beyond those pairings: Not stated in the listings used here.
How the scores add up
Each blank is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing, and a blank with no stated safety certification or warranty term scores nothing on that measure.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Lyksgir 304 Steel Cards | 9.5 | 30 | 22 | 20 | 0 | 0 |
| weparmeety Black 0.45mm Cards | 9.5 | 29 | 21 | 21 | 0 | 0 |
| ZSMKJIAYE 500 Black Cards | 9.5 | 28 | 20 | 22 | 0 | 0 |
| weparmeety Red 0.21mm Cards | 9.4 | 28 | 20 | 21 | 0 | 0 |
| Oskal Glossy Black Cards | 9.4 | 27 | 19 | 20 | 0 | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
FAQ: lasers and CNC
Do blank metal wallet cards fit a standard wallet?
Yes, by the sizes the listings state. The aluminum blanks measure 86 x 54 mm, or 3.38 x 2.12 inches, and the stainless steel blank measures 3.39 x 2.13 inches, which the listings describe as standard business card size for wallets, purses, and card holders.
Can you engrave both sides of a blank metal card?
On the cards that state it, yes. The Oskal listing describes engraving on both sides, and the Lyksgir listing describes blank surfaces on both sides. For the other cards, the listings do not state double-sided engraving, so this guide records it as Not stated.
What can you make with blank metal wallet cards?
The listings describe business cards, VIP and membership cards, name badges, gift tags, plaques, table cards, and commemorative items. The ZSMKJIAYE listing adds poker cards and festive handicrafts, and the weparmeety listings add label cards and gift metal cards.
Why do some listings show different thickness figures?
Because a spec table can disagree with the title and bullets of the same listing. The Oskal title and bullets describe a thin card, while its spec table lists a larger thickness figure, and the ZSMKJIAYE listing shows the same pattern. This guide follows the title and bullets and notes the mismatch in each review.
Which thickness is right for a wallet card?
It depends on handling. The 0.5 mm stainless steel listing describes resistance to bending, warping, and corrosion for frequent handling, while the 0.2 mm and 0.21 mm aluminum listings describe light, flexible cards. The 0.45 mm matte black aluminum card sits between those figures and is described as sturdy and not easy to bend.
Related: the metal business card guide, stainless vs aluminum business cards, and the engraving bit guide for metal. Also see our laser safety glasses guide and laser engraver for beginners.
