Best Plywood for Laser Cut Wall Art (2026): 5 Compared
Five plywood and basswood sheet packs for laser cut wall art compared by sheet size, thickness, pack count and stated laser uses, scored on listing facts.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCertBuy 12×12 1/2 Birch9.5/10View on Amazon - 2
Best Large SheetsJuexica 24×36 3mm9.5/10View on Amazon - 3
Best Value PackThiecoc 12×20 1/89.4/10View on Amazon - 4
Best Small SquaresZOFORTY 5×5 Squares9.4/10View on Amazon - 5
Best Thin StockQflrgon 12×12 1/169.4/10View on Amazon - 6
MUXGOA 20 Pcs Poplar Plywood SheetsView on Amazon - 7
Baltic Birch Plywood 1/8'' x 12'' x 18''View on Amazon - 8
3 mm Baltic Birch Plywood 1/8 x 12 x 24 InchView on Amazon - 9
3 mm Baltic Birch Plywood 1/8 x 12 x 20 InchView on Amazon - 10
3 mm Baltic Birch Plywood 1/8 x 18 x 24 InchView on Amazon
Wall art is where many laser owners find their first paying project: layered mandalas, name signs, topographic maps and house portraits, all cut from sheet stock and sold at markets or online. The best plywood for laser cut wall art is the sheet whose size, thickness and stated laser use match the panels that actually get cut. This guide compares five plywood and basswood sheet packs by sheet size, thickness, pack count and stated laser uses, using only what each listing publishes.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall CertBuy 12×12 1/2 Birch: 1/2-in Baltic birch, 4-pack of 12 x 12 boards Check price on Amazon
- Best Large Sheets Juexica 24×36 3mm: 24 x 36 in sheets, 3 mm, for big panels Check price on Amazon
- Best Value Pack Thiecoc 12×20 1/8: 12 sheets, 12 x 20 in, 1/8 in Check price on Amazon
- Best Small Squares ZOFORTY 5×5 Squares: 100 pieces of 5 x 5 in for small cuts Check price on Amazon
- Best Thin Stock Qflrgon 12×12 1/16: 1/16 in sheets for delicate cuts Check price on Amazon
Machines on the list
CertBuy 12" x 12" Plywood Board 1/2 Thick
A 4-pack of 12 x 12 Baltic birch plywood boards, 1/2-Inch thick, for laser projects and crafts.
Pros
- 1/2-Inch thick Baltic birch, the thickest and most rigid stock here
- States boards are stable, not easy to crack and deform
- Flat, smooth, polished surface with a low stated deformation rate
- Neatly cut edges without burrs, per the listing
Cons
- Warranty description lists only 30 with no unit, so no warranty term is stated
- Four boards per pack, the smallest pack count here
- 1/2-Inch stock suits panels, not delicate detail cuts
- Only the 12 x 12 format is offered, no larger sheets
6 Pcs 24" X 36"X 1/8" Basswood Plywood Sheets
A 6-pack of 24 x 36 basswood plywood sheets, 3mm thick, for laser cutting and engraving.
Pros
- 24 x 36-Inch sheets, the largest working area here
- Lists laser cutting, laser engraving, CNC cutting and wood burning among uses
- Smooth, polished basswood surface the maker calls sturdy for long use
- 3 mm thickness, the common middle ground for cut projects
Cons
- No warranty term is stated
- Spec table lists 37.01 x 24.61 x 1.18 inches against the title's 24 x 36 x 1/8; the title and bullets win
- 5.33 kg listed weight, the heaviest pack here
- Six sheets per pack, fewer than the smaller-format packs
Plywood 12Pcs, 2MM 1/8" x 12" x 20" Inch,Perfect
A 12-pack of 12 x 20 plywood sheets, 1/8-Inch thick, for laser, CNC and wood burning.
Pros
- 12 sheets per pack for practice and small batches
- Lists laser, CNC cutting and wood burning among uses
- Smooth, burr-free surface that takes dye, paint and engraving, per the listing
- 1/8-Inch thickness suits everyday cut projects
Cons
- Title says Baltic Birch while the bullets say basswood; the material is unclear
- Warranty description says no, so no warranty is stated
- Spec dimensions of 19.69 x 11.81 x 0.98 inches contradict the title's 12 x 20 x 1/8; the title and bullets win
- Only the 12 x 20 format is offered
100 Pieces 5x5 Inch Wood Squares Unfinished
100 unfinished 5 x 5 basswood plywood squares, 1/8-Inch thick, for crafts including wall art.
Pros
- 100 pieces per pack, the largest count here, and wall art is a stated use
- Smooth, sturdy surface for painting, staining, pyrography and laser engraving
- Pre-cut 5 by 5 squares, ready for small projects
- 3 mm thickness matches the common laser-cut stock
Cons
- Spec table says 99 pieces against the title's 100; the title and bullets win
- The 100% Warranty line states no concrete term, so no warranty term is stated
- 5 x 5 format is too small for full-size wall panels
- Squares only; no larger sheet option
5Pack Balsa Wood Sheets Basswood Craft Plywood
A 5-pack of 12 x 12 basswood craft plywood sheets, 1/16-Inch thick, for laser cutting and engraving.
Pros
- 1/16-Inch thickness for clean, sharp detail cuts, per the listing
- Kiln-dried, sanded, splinter-free surface that holds paint, stain, glue and ink
- Lists laser cutting, engraving, pyrography and architectural models among uses
- 5 sheets per pack for delicate projects
Cons
- Spec table says 1 piece against the title's 5-pack; the title and bullets win
- The 30-day return policy is not a warranty term, so no warranty is stated
- 1/16-Inch stock is too thin for rigid wall panels
- Title and material type mix balsa wood and basswood
Other machines to compare
MUXGOA 20 Pcs Poplar Plywood SheetsCheck price on Amazon
Baltic Birch Plywood 1/8'' x 12'' x 18''Check price on Amazon
3 mm Baltic Birch Plywood 1/8 x 12 x 24 InchCheck price on Amazon
3 mm Baltic Birch Plywood 1/8 x 12 x 20 InchCheck price on Amazon
3 mm Baltic Birch Plywood 1/8 x 18 x 24 InchCheck price on Amazon
Specs compared
| Plywood | HQ Score | Sheet size | Thickness | Pack count | Stated use |
|---|---|---|---|---|---|
| CertBuy 12×12 1/2 Birch | 9.5/10 | 12 x 12 in | 1/2 in | 4 pack | Laser projects, crafts |
| Juexica 24×36 3mm | 9.5/10 | 24 x 36 in | 3 mm | 6 pack | Laser cutting, engraving |
| Thiecoc 12×20 1/8 | 9.4/10 | 12 x 20 in | 1/8 in | 12 pack | Laser, CNC, wood burning |
| ZOFORTY 5×5 Squares | 9.4/10 | 5 x 5 in | 1/8 in | 100 pieces | Wall art, crafts |
| Qflrgon 12×12 1/16 | 9.4/10 | 12 x 12 in | 1/16 in | 5 pack | Laser engraving, pyrography |
Specifications are manufacturer rated, as published on each listing and collected 22 October 2026.
How to choose the best plywood for laser cut wall art
Sheet size decides the largest panel
Wall art panels come in standard frame sizes, so the sheet should be at least as large as the finished piece. The Juexica sheets are 24 x 36 inches, the largest here, and suit full-size panels and layered art cut from one blank. The CertBuy and Qflrgon packs are 12 x 12 squares, the Thiecoc sheets are 12 x 20, and the ZOFORTY pack is pre-cut 5 x 5 squares for ornaments and small pieces. Compare all plywood for laser cutting options before settling on a size, and see the plywood for laser cut boxes guide for thicker small-format stock.
Thickness: 1/16 in to 1/2 in
Thickness decides what the finished piece can do. The Qflrgon sheets are 1/16 in, thin enough for clean, sharp detail cuts and delicate inlays. The common middle ground is 1/8 in, seen on the Thiecoc and ZOFORTY packs and on the 3 mm Juexica sheets, which cuts easily and still holds its shape in a frame. The CertBuy boards are 1/2 in, the thickest here, for rigid panels that hang flat without backing. A comparison of plywood thicknesses covers how thickness changes the cut.
| Pack | Sheet size | Thickness | Best for |
|---|---|---|---|
| CertBuy | 12 x 12 in | 1/2 in | Rigid wall panels |
| Juexica | 24 x 36 in | 3 mm | Large layered art |
| Thiecoc | 12 x 20 in | 1/8 in | Everyday practice pieces |
| ZOFORTY | 5 x 5 in | 1/8 in | Ornaments and small cuts |
| Qflrgon | 12 x 12 in | 1/16 in | Delicate detail work |
Baltic birch or basswood
Four of the five packs are basswood, and one is Baltic birch. The CertBuy listing states Baltic birch plywood for laser projects, and birch generally shows a cleaner engraved contrast than pale basswood. The Thiecoc listing contradicts itself: the title says Baltic Birch while the bullets say basswood, so the species there is unclear. The Juexica, ZOFORTY and Qflrgon listings all state basswood. The Baltic birch vs basswood guide compares how the two engrave and cut.
Pack count and replacement
Wall art sellers burn through blanks, so pack count matters as much as sheet size. The ZOFORTY pack has 100 pieces for ornament batches, the Thiecoc pack has 12 sheets for practice and small runs, the Juexica pack has 6 large sheets, the Qflrgon pack has 5 sheets, and the CertBuy pack has 4 boards. When a design sells, buying the same pack again keeps the thickness and finish consistent. The thin plywood sheets guide lists more small-format stock for detail work.
Cutting plywood means heat and smoke. Never leave a running laser unattended, keep an extinguisher at the machine, and vent smoke outdoors or through fume extraction. Never laser PVC or vinyl.
Project Match
Match the project to the pack, using only what each listing states:
- Large layered wall panels: Juexica 24×36 3mm, the only sheets here large enough for full-size panels.
- Rigid 1/2-in panels that hang flat: CertBuy 12×12 1/2 Birch, the thickest stock here.
- Ornaments, tiles and small batch cuts: ZOFORTY 5×5 Squares, with wall art among its stated uses.
- Delicate stencils and detailed inlays: Qflrgon 12×12 1/16, the thinnest stock here.
- Practice pieces and small projects: Thiecoc 12×20 1/8, a 12-sheet pack for everyday cutting.
How the scores add up
Each pack is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. Performance here means stated laser compatibility and sheet coverage; build means stated thickness and surface finish; value means pack count for the format. None of these listings states a laser safety certification or a warranty term with a concrete time frame, so safety and warranty scored zero across the board. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| CertBuy 12×12 1/2 Birch | 9.5 | 30 | 21 | 21 | 0 | 0 |
| Juexica 24×36 3mm | 9.5 | 30 | 21 | 20 | 0 | 0 |
| Thiecoc 12×20 1/8 | 9.4 | 28 | 20 | 21 | 0 | 0 |
| ZOFORTY 5×5 Squares | 9.4 | 28 | 20 | 20 | 0 | 0 |
| Qflrgon 12×12 1/16 | 9.4 | 28 | 19 | 20 | 0 | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
FAQ: lasers and CNC
What plywood works for laser cut wall art?
Basswood and Baltic birch sheet packs cut cleanly on diode and CO2 lasers. The five packs here run from 1/16 in to 1/2 in thick, covering delicate inlays to rigid panels.
Is thicker plywood better for wall art?
It depends on the piece. The 1/2 in CertBuy boards suit rigid panels that hang flat, while 1/8 in stock like the Thiecoc and ZOFORTY packs cuts faster and frames easily. The 1/16 in Qflrgon sheets are for detail, not structure.
Can plywood be cut on a home laser?
Yes, with the right setup. Never leave a running laser unattended, keep an extinguisher nearby, and vent smoke outdoors or through fume extraction.
Do these sheets come ready to cut?
The ZOFORTY and Thiecoc packs are unfinished, the Qflrgon sheets are kiln-dried and sanded, and the Juexica sheets are polished basswood. All five are ready for laser cutting as listed.
Which pack is best for selling ornaments?
The ZOFORTY pack: 100 pieces of 5 x 5 in basswood squares, with wall art and ornaments among its stated uses, suits batch ornament cutting.
Related: best plywood for laser cutting, best plywood for laser cut boxes, best plywood for laser cut puzzles, best basswood for laser cutting and thin plywood sheets.
