Baltic Birch vs Birch Plywood for Laser Cutting: Which One Should You Buy?
Two stated baltic birch 10-packs compared on thickness, sheet size, warp claims and laser uses.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Baltic Birch Plywood 1/8'' x 12'' x 18''9.7/10View on Amazon - 2
Baltic Birch Plywood9.6/10View on Amazon - 3
Baltic Birch Plywood Sheets Box of 459.6/10View on Amazon - 4
3 mm Baltic Birch Plywood 1/8 x 12 x 24 InchView on Amazon - 5
Baltic Birch PlywoodView on Amazon - 6
3 mm Baltic Birch Plywood 1/8 x 9 x 12 InchView on Amazon - 7
3 mm Baltic Birch Plywood 1/8 x 12 x 12 InchView on Amazon - 8
6 mm Baltic Birch Plywood 1/4 x 12 x 24 InchView on Amazon - 9
6 mm Baltic Birch Plywood 1/4 x 12 x 12 InchView on Amazon
If you cut wood on a laser, the baltic birch vs birch plywood for laser cutting question comes down to what the listings actually state: thickness, sheet size, flatness and stated laser uses. Here both examples are tagged baltic birch, so this comparison centers on the stated 1/8 in ACXFOND 10-pack against the stated 1/4 in yarlung 10-pack, using only what each listing publishes.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: pick the yarlung 10-pack for the thicker stated 1/4 in sheets with stated cleaner joinery and a no-splinter face. Pick the ACXFOND 10-pack for the larger stated 16 by 12 in sheets at 1/8 in with a stated no-warping finish. Both state 10 sheets and laser uses.
Machines on the list
Yarlung 10 Pack Baltic Birch Plywood
A stated 10-pack of 11.8 by 11.8 in baltic birch sheets at 1/4 in thick, unfinished with a smooth, no-splinter face and stated cleaner joinery.
Pros
- Stated 1/4 in (6mm) thickness, the thicker sheet here
- Stated smooth face with no splinters and clean joinery
- Stated no warps or deformation on all 10 sheets
- Stated laser projects among wide craft uses
Cons
- No warranty term is stated
- No stated laser cut settings or pass counts
- Square 11.8 in sheets, no larger stated size
- No stated moisture or grade rating
10Pcs 16 x 12 x 1/8 Inch Baltic Birch Plywood
A stated 10-pack of 16 by 12 in baltic birch sheets at 1/8 in thick, unfinished, stated laser cut with no warping and easy to cut.
Pros
- Stated 1/8 in (3mm) thickness, the thinner sheet here
- Stated laser cut and polished with no warping
- Stated easy cutting and engraving with laser or knives
- 16 by 12 in sheets, the largest stated sheet here
Cons
- Spec table states 4 x 5 x 3 in, contradicting the stated 16 x 12 in sheets
- No warranty term is stated
- No stated laser cut settings or pass counts
- No stated edge or joinery quality
Other machines to compare
3 mm Baltic Birch Plywood 1/8 x 12 x 24 InchCheck price on Amazon
Baltic Birch PlywoodCheck price on Amazon
3 mm Baltic Birch Plywood 1/8 x 9 x 12 InchCheck price on Amazon
3 mm Baltic Birch Plywood 1/8 x 12 x 12 InchCheck price on Amazon
6 mm Baltic Birch Plywood 1/4 x 12 x 24 InchCheck price on Amazon
6 mm Baltic Birch Plywood 1/4 x 12 x 12 InchCheck price on Amazon
Side by side
| Spec | ACXFOND 10-Pack | yarlung 10-Pack | Takeaway |
|---|---|---|---|
| HQ Score | 58 | 60 | Stated specs decide |
| Thickness | 1/8 in (3mm) stated | 1/4 in (6mm) stated | Thicker suits sturdier builds |
| Sheet size | 16 x 12 in stated | 11.8 x 11.8 in stated | Bigger sheet fits larger designs |
| Pack | 10-pack stated | 10-pack stated | Even on count |
| Warp claim | No warping stated | No warps or deformation stated | Both state flat sheets |
| Laser use | Cutting and engraving stated | Laser projects stated | Both state laser use |
Specifications are manufacturer rated, as published on each listing and collected 21 October 2026.
baltic birch vs birch plywood for laser cutting: thickness and size
The ACXFOND example states 1/8 in (3mm) sheets at 16 by 12 in. The yarlung example states 1/4 in (6mm) sheets at 11.8 by 11.8 in. Neither listing states a birch plywood example on the other side of the keyword, so the thickness story here is the stated 1/8 in sheet against the stated 1/4 in sheet. For thin cut parts and puzzles, the stated 1/8 in ACXFOND is the thin story; for sturdier stated projects like storage boxes, the stated 1/4 in yarlung is the thick story.
Warp and stability
The ACXFOND example states the sheets are laser cut, polished and have no warping, with stated durability and stability. The yarlung example states all 10 sheets are cut straight without warps or deformation, with stated exceptional durability, rigidity and stability. Both state flat, stable sheets. Neither listing states a moisture rating, so the warp story rests on these stated claims alone.
Laser cutting and engraving
The ACXFOND example states the sheets are suitable for cutting and engraving with utility knives, scroll saws, and laser or craft knives. The yarlung example states the sheets can be cut and engraved, and names laser projects among its stated uses. Neither listing states laser power, speed or pass counts, so plan a settings check on your machine. The stated laser compatibility is even; the thickness is what separates them.
Stated projects
The ACXFOND example states wood carving, wood burning, painting, model airplanes, sculpting, modeling, craft model bodies, school woodworking art projects, movie props, science and military models, toys, wood home decor and alphabet puzzles. The yarlung example states models, sculpture, wooden sailing, bridge, film props, toys, laser projects, DIY craft, festival ornaments, home decor, logo puzzles and storage boxes. For small detailed pieces, the stated ACXFOND list is the project story; for boxes and structural models, the stated yarlung list is the project story.
Choose the yarlung 10-Pack if
You want the thicker stated 1/4 in sheets with a stated smooth, no-splinter face and stated cleaner joinery for sturdier builds.
Choose the ACXFOND 10-Pack if
You want the larger stated 16 by 12 in sheets at 1/8 in with a stated no-warping finish for thin cut parts and puzzles.
Thickness: what the listings state
The ACXFOND example states 1/8 inch sheets, with 3mm in the title and 0.13 inches in the spec table. The yarlung example states 1/4 inch sheets, with 6 millimeters in the spec table and 0.24 inches in the item dimensions. For the stated thinner sheet, the ACXFOND names 1/8 inch; for the stated thicker sheet, the yarlung names 1/4 inch.
Sheet sizes: what the listings state
The ACXFOND example states 16 by 12 inch sheets in a 10-pack. The yarlung example states 11.8 by 11.8 inch square sheets in a 10-pack. For the stated largest sheet, the ACXFOND names 16 by 12 inches; for the stated square sheet, the yarlung names 11.8 by 11.8 inches.
Weights: what the listings state
The ACXFOND example states 1.93 kg in the spec table. The yarlung example states 2.88 kg. For the stated lighter pack, the ACXFOND names 1.93 kg; for the stated heavier pack, the yarlung names 2.88 kg.
Warp and cut quality: what the listings state
The ACXFOND example states the sheets are laser cut, polished and have no warping, with durability and stability. The yarlung example states all 10 sheets are cut straight without warps or any deformation, with exceptional durability, rigidity and stability. For the stated no-warping figure, both name it; for the stated laser cut, the ACXFOND is the only pick.
Laser projects: what the listings state
The ACXFOND example states the 1/8 sheets are easy to cut and suitable for cutting and engraving with utility knives, scroll saws, and laser or craft knives. The yarlung example states use for laser projects with the 1/4 inch sheets. For the stated laser cutting figure, both name it; for the stated thinner laser stock, the ACXFOND names 1/8 inch.
Model numbers and makers
The ACXFOND example states manufacturer part number AFUS-brichsheet-10p-42×30-230731. The yarlung example states model number Ya-UnfinishedBirchPlywood-10p. Both state 10 pieces with a 10 count unit count. For the stated part number, the ACXFOND names it; for the stated model number, the yarlung names it.
Project Match
| Project type | Pick | Why, from the listings |
|---|---|---|
| Alphabet puzzles and thin cut parts | ACXFOND 10-Pack | Stated 1/8 in sheets, easy cutting stated |
| Storage boxes and bridge models | yarlung 10-Pack | Stated 1/4 in sheets, rigidity stated |
| Laser-engraved home decor | Either | Both state laser and engraving uses |
| Film props and toys | Either | Both state props and toys |
Buying advice: matching the sheet to the project
Start with thickness. The ACXFOND example states 1/8 in (3mm) sheets and easy cutting with utility knives, scroll saws and lasers; the yarlung example states 1/4 in (6mm) sheets with rigidity and stability for woodworking. Thin sheets engrave fast and cut with less power; thick sheets hold screws and carry load in boxes and bridge models.
Next, sheet size. The ACXFOND example states 16 by 12 in sheets; the yarlung example states 11.8 by 11.8 in square sheets. The 16 by 12 in rectangle suits long parts and alphabet puzzles; the square suits symmetric cuts and nesting. Both come as 10-piece packs with a 10 count unit count, so the per-sheet price math stays comparable.
Weight tells the story of density. The ACXFOND pack states 1.93 kg; the yarlung pack states 2.88 kg. The heavier pack means more wood per sheet, which matches the yarlung’s stated rigidity and cleaner joinery at the birch edges. The ACXFOND states no warping after laser cutting and polishing; the yarlung states no warps or deformation with straight cuts.
For stated uses, the ACXFOND lists wood carving, wood burning, painting, model airplanes, sculpting and craft model bodies; the yarlung lists models, sculpture, wooden sailing, bridge, film props, toys and storage boxes. Pick the 1/8 in example for engraving and thin craft work, and the 1/4 in example for structural projects. Neither listing states a warranty term, so buy on the stated thickness, size and flatness.
FAQ: lasers and CNC
Which is thicker?
The yarlung states 1/4 in (6mm). The ACXFOND states 1/8 in (3mm).
Which states no warping?
Both. The ACXFOND states no warping; the yarlung states no warps or deformation.
Do both state laser cutting?
Yes. The ACXFOND states cutting and engraving with laser; the yarlung states laser projects.
Which states cleaner joinery?
The yarlung states the birch edges create cleaner joinery. The ACXFOND states no edge quality.
Is a warranty stated?
No. Neither listing states a warranty term.
Related: birch vs basswood for laser engraving and mdf vs plywood for cnc router.
