12×15 vs 15×15 Heat Press: Which One Should You Buy?
The 12x15 side brings 5-in-1 attachments for shirts, mugs, hats and plates, while the 15x15 side brings a larger flat platen with a slide-out drawer.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Slendor 12x15 Inch 5 in 1 Swing Away Heat Press9.6/10View on Amazon - 2
Slendor 12x15 Inch 5 in 1 Beginner Heat Press9.6/10View on Amazon - 3
ColorSub Heat Press 15x15 inch Industrial Quality9.6/10View on Amazon - 4
CoolSub Heat Press Machine with Slide Out Drawer9.5/10View on Amazon
A plain shirt, a blank mug and a hat waiting for a design start this comparison. 12×15 vs 15×15 heat press comes down to a simple trade: the smaller platen side in this guide brings attachments for mugs, tumblers, hats and plates, while the larger platen side brings more flat room with a slide-out drawer.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you.
Verdict: pick the 12×15 side if you want one machine that also presses mugs, tumblers, hats and plates. Pick the 15×15 side if most of your work is flat items and you want the larger platen and a drawer for loading.
Machines on the list

Slendor 12x15 Inch 5 in 1 Swing Away Heat Press
A 12x15 inch 5-in-1 swing-away heat press with hat, 30 oz tumbler and plate attachments.
Pros
- 5-in-1 attachments for shirts, hats, tumblers, plates
- 0-482°F (0-250°C), 0-999 seconds
- 360-degree swing-away moves the element aside
- 2 years warranty stated
Cons
- Heavier than the pink listing at 33.0 pounds
- Tumbler attachment length listed as 10.6, no unit stated
- Flat platen smaller than 15x15 listings
- Counting function suits batch work

Slendor 12x15 Inch 5 in 1 Beginner Heat Press
A beginner-friendly 12x15 inch 5-in-1 swing-away heat press with mug, hat and plate attachments.
Pros
- 5-in-1 attachments cover shirts, mugs, hats and plates
- 0-482°F (0-250°C), 0-999 seconds
- 360-degree swing-away arm moves the heating plate aside
- 2 years warranty stated
Cons
- Mug press covers 11–15 oz mugs, narrower than green tumbler range
- Flat platen smaller than 15x15 listings
- No counting function or time alarm stated
- Base measures 16.3 inches x 15.4 inches x 19.5 inches

ColorSub Heat Press 15x15 inch Industrial Quality
A 15x15 inch slide-out drawer heat press with a non-stick coated platen and stated power and voltage.
Pros
- 15x15 inch platen gives more flat room
- Sliding drawer removes reaching under the hot element
- Power and voltage stated: 1222 W at 110V
- 0-482°F (0-250°C), 0-999 seconds
Cons
- No mug, hat or plate attachments listed
- No weight stated
- Warranty 1 Year Manufacturer, shorter than Slendor listings
- Flat pressing only, as listed

CoolSub Heat Press Machine with Slide Out Drawer
A 15x15 inch slide-out heat press with a teflon non-stick plate and pressure adjustment for flat items.
Pros
- 15x15 inch platen gives more flat room
- Slide-out drawer reduces accidental contact during loading
- Pressure knob suits different material thicknesses
- Digital LCD control panel
Cons
- Temperature tops out at 0-440°F, lower than the others
- No mug, hat or plate attachments listed
- No weight stated
- One bullet calls it clamshell; title and other bullets state slide-out
Other machines to compare
HTVRONT Auto Heat Press 2Check price on Amazon
15x15 Inch Extra Large Heat Press Pillow Teflon Heat PressingCheck price on Amazon
YTFGGY 3 Pack Teflon Sheets for Heat Press 15x15 and 3 RollsCheck price on Amazon
Fancierstudio 15x15 Sublimation Heat PressCheck price on Amazon
White PTFE Sheet for Heat PressCheck price on Amazon
YRYM HT PTFE Teflon Sheets for Heat Press- 3 Pack 12"x16"Check price on Amazon
12×15 vs 15×15 Heat Press: What Separates the Two Sides
Side by side
| Spec | Slendor 12×15 5-in-1 | Slendor 12×15 Beginner | ColorSub 15×15 | CoolSub 15×15 |
|---|---|---|---|---|
| HQ Score | 76 | 75 | 71 | 64 |
| Platen | 12×15 inch | 12×15 inch | 15×15 inch | 15×15 inch |
| Temperature range | 0-482°F (0-250°C) | 0-482°F (0-250°C) | 0-482°F (0-250°C) | 0-440°F |
| Time range | 0-999 seconds | 0-999 seconds | 0-999 seconds | 0-999 seconds |
| Design | Swing-away, 360-degree rotation | Swing-away, 360-degree arm | Slide-out drawer | Slide-out drawer |
| Attachments | 5-in-1: hat, 30 oz tumbler, 2 plate presses | 5-in-1: mug, hat, 2 plate presses | No attachments listed | No attachments listed |
| Weight | 33.0 pounds | 28.0 pounds | Not stated | Not stated |
| Warranty | 2 years warranty | 2 years | 1 Year Manufacturer | one year warranty |
Size and performance figures are the brand’s ratings quoted from listings on 4 November 2026.
Platen size and what it changes
The two Slendor listings state a 12×15 inch platen, while the CoolSub and ColorSub listings state a 15×15 inch platen. A larger platen gives more flat room in one press, while the 12×15 listings pair the smaller platen with attachments for mugs, tumblers, hats and plates.
That fit question shows up in the attachments. The Slendor 12×15 listings are 5-in-1 machines: the green listing adds a hat press, a 30 oz tumbler press and plate presses, while the pink listing adds a mug press, a hat press and plate presses. The 15×15 listings are flat presses, as listed.
Temperature and time controls
Temperature ranges are stated clearly on all 4 listings, so this is a fair comparison. The green Slendor, the pink Slendor and the ColorSub listings all give 0-482°F (0-250°C), while the CoolSub listing gives 0-440°F. Time ranges match across all 4 listings at 0-999 seconds. The green and pink Slendor listings also note switching between Fahrenheit and Celsius.
On stated figures alone, the CoolSub listing tops out lower on temperature than the other 3 listings.
Design: swing-away vs slide-out
The 12×15 side uses swing-away arms. The green Slendor listing describes full 360-degree rotation that moves the heating element aside, and the pink Slendor listing describes a full 360-degree swing-away arm that moves the heating plate completely aside for safer operation and better workspace visibility. Both also offer a detachable lower platform and adjustable pressure.
The 15×15 side uses slide-out drawers instead. The ColorSub listing states a sliding drawer lower platen that removes the need to reach under the hot heating element when laying down transfer materials, and the CoolSub listing states an upgraded sliding base plate that reduces the chance of accidental contact when transferring clothes.
Weight and footprint
Weight is stated only on the 12×15 side, so it cannot decide the comparison: the green Slendor listing states 33.0 pounds and the pink Slendor listing states 28.0 pounds, while the CoolSub and ColorSub listings state no weight.
Choose the 12×15 side if
- You want mugs, tumblers, hats or plates as well as shirts.
- You like a swing-away arm that moves the hot platen aside.
- A temperature range of 0-482°F (0-250°C) suits your materials.
Choose the 15×15 side if
- Most of your work is flat items.
- You want the larger 15×15 inch platen in one press.
- A slide-out drawer for loading appeals more than a swing-away arm.
Project Match
- T-shirts and flat apparel: all 4 listings cover flat pressing.
- Mugs and tumblers: the green Slendor 30 oz tumbler press and the pink Slendor mug press for 11–15 oz mugs.
- Hats: both Slendor listings, with a hat press of 5.5 x 3 inch.
- Plates: both Slendor listings, with plate presses in the sizes each listing states.
- Tiles, bags and flat sublimation: the CoolSub and ColorSub listings.
A heat press platen runs hot enough to burn. Keep hands clear of the platen, use the swing-away arm or slide-out drawer as the listing describes, and never leave a running press unattended.
FAQ: lasers and CNC
Which platen size is better for T-shirts?
Both sides press shirts. The 15×15 listings give more flat room in one press, while the 12×15 listings pair the smaller platen with attachments for other items.
Do I need attachments or just a flat press?
Attachments matter only if you press mugs, tumblers, hats or plates. The Slendor listings include those attachments, while the CoolSub and ColorSub listings name flat pressing only.
What temperature range do these presses cover?
The green Slendor, pink Slendor and ColorSub listings state 0-482°F (0-250°C), and the CoolSub listing states 0-440°F. All 4 listings state a time range of 0-999 seconds.
How do slide-out and swing-away designs differ?
A swing-away arm moves the heating element aside, as the Slendor listings describe, while a slide-out drawer moves the lower platen out toward you, as the CoolSub and ColorSub listings describe.
Which press is lighter?
That cannot be answered from these listings: weight is stated only for the Slendor listings, at 33.0 pounds for green and 28.0 pounds for pink. The CoolSub and ColorSub listings state no weight.
Related: clamshell vs swing-away heat press, the best T-shirt heat press machine picks, sublimation vs heat transfer vinyl and the heat presses and sublimation hub.




